Monday, February 10, 2014

Small Wall Heater - Q'Mark CWH 1000 Series


CWH1000 Series - Commercial Fan-Forced Wall Heaters by Q'Mark Marley 

    Fast heat response, compact design and versatility make the CWH1000 Series heaters ideal for dens, basements, converted attics, breezeways, garages, bathrooms, small offices, workshops and similar areas. Also, adaptable to multiple installations in somewhat larger or odd shaped room
    Fan delay: On a call for heat, element is energized but fan is delayed until element is warm, eliminating the circulation of cold air during start up. When the thermostat is satisfied, the element is de-energized, but the fan continues until all heated air is discharged providing longer component life and higher comfort level
    Motor is totally enclosed, impedance protected with permanently lubricated bearings
    Airflow system maximizes air volume at minimum noise level; 65 CFM
    Rugged louvered commercial grade steel grille creates downflow air pattern
    This heater is designed for installation in 2x4 or larger wall sections using the wall box provided. The heater may also be surface mounted to the wall by using the Surface Mounting Frame, Model No. CWHSM (order separately)
    Includes built-in disconnect switch

Northern White baked enamel finish



Q'Mark CWH1101DS  1000/500 watts  8.4/4.2 amps  120 volts
Q'Mark CWH1151DS  1500/750 watts  12.5/6.25 amps  120 volts
Q'Mark  
CWH1201DS  1800 watts  15 amps  120 volts
Q'Mark CWH1202DS   2000/1000 watts  8.3/4.2 amps  240 volts
Q'Mark CWH1157DS   1500/750 watts  5.5/2.75 amps  277 volts
Q'Mark CWH1207DS   2000/1000  watts  7.2/3.61 amps  277 volts
Q'Mark CWH1208DS   2000/1000  watts  9.6/4.8 amps  208 volts
Q'Mark CWHSM  surface mounting frame (Accessory)
Q'Mark CWHS1  1 inch  Semi-Recess Mounting
Q'Mark CWHS2  2 inch  Semi-Recess Mounting

MOUNTING LIMITATIONS
1. Do not install heater closer than 4” from
floor.
2.Do not install heater behind towel rack,
behind door, in floor, in ceiling, in closet,
or where air flow may be obstructed.

HEATING ELEMENT: The heating element shall be of the
non-glowing design consisting of an 80/20 nickel-chromium
resistance wire enclosed in a steel sheath to which plate fins
are copper brazed. It shall be warranted for 5 years.The
element shall cover the entire air discharge area to ensure
uniform heating of all discharge air.


MOTOR AND CONTROLS: The fan motor shall be
impedance protected, permanently lubricated and with totally
enclosed motor. Fan control shall be of the bi-metallic, snapaction
type and shall activate fan after heating element
reaches operating temperature, and continue to operate the
fan after the thermostat is satisfied and until all heated air has
been discharged.The thermostat shall be single pole type on
all models. Thermal cutout shall be bi-metallic, snap-action
type designed to shut off heat in the event of overheating. The
fan shall be five-bladed aluminum. The fan motor shall be
totally enclosed.

216-360-9800

Nematron M1500SRT Sunlight Readable Flat Panel

Nematron M1500SRT Sunlight Readable Flat Panel ~ NEW 

Contact Us!


M1500SRT Sunlight Readable Industrial Flat Panel Monitors with 15” High Bright LED-backlit Display
The M1500SRT industrial monitor is the introductory model in Nematron's line of Sunlight Readable panel mount monitors. The M1500SRT is ideal for harsh applications that may have bright ambient lighting, but may also require the ruggedness of an industrial monitor.



The M1500SRT features a 1500 Nit LED-backlit display. With significantly higher brightness than standard CCFL-backlit displays, the M1500SRT maintains high contrast in bright direct or indirect sunlit conditions. The auto-sensor feature automatically adjusts the display brightness according to bright or dim conditions, reducing user eye strain, especially in dimly lit conditions. Toggle buttons on the front bezel make it convenient for a user to adjust display brightness up or down.

The M1500SRT uses analog resistive touchscreen technology, which allows the use of gloved hands and also alleviates pooled water concerns that capacitive-type touchscreens struggle with in outdoor conditions, such as rain exposure. M1500SRT is also offered with a non-touch, clear polycarbonate window.
The M1500SRT is tested and approved for Class I Div 2 hazardous locations when installed in a NEMA type enclosure with appropriate wiring methods.

Standard Features:
  • 15" XGA Color TFT LED-backlit Display
  • 1500 Nit High Contrast Display
  • 5-wire Ultra-clear Analog Resistive Touchscreen
    - Optional Non-Touch clear polycarbonate window
  • Ultra-Thin panel mounting depth, 2.4" behind bezel
  • User-adjustable brightness toggle buttons on front bezel
  • Auto-sensor for manual or auto adjusting brightness based on brightly or dimly lit conditions
  • Manual Standby button
  • NEMA 4/4X/12 front bezel
    - Optional 304 stainless steel front bezel
  • Integral 100-240 VAC power supply
    - Optional isolated 24 VDC input power
  • Simplified installation with no studs
  • Accepts analog 15-pin video input or DVI input
    - VESA 1 compliant - modes up to 16 million colors
  • RS-232 or USB interface for touchscreen
  • UL and cUL Ordinary Locations Listed 
  • UL and cUL Hazardous Locations Listed
    - Class I Division 2, Groups A, B, C, & D; Class II Division 2, Groups F & G; Class III when mounted in a NEMA enclosure
  • FCC & CE Compliant
  • 2-Year warranty

UL Approvals - Ordinary Locations
cUL Approvals - Ordinary Locations
CE Declaration
UL Approvals - US Class I, Div 2 Approvals
cUL Approvals - Canada Class I, Div 2 Approvals

Display Diagonal15.0" (381.0mm)
Display Sizes
(Active Area H x V)
11.97" x 8.98"
(304.0mm x 228.1mm)
Native ResolutionXGA, 1024 x 768
Displayable Colors16M
Brightness, Typical1500 Nit 1 (minimum)
Contrast Ratio, Typical600:1 (through touchscreen)
Horizon/Vertical View
Angle, CR>5, Typical
160°/160°
Backlight Life, Typical50,000 hrs


216-360-9800