Amerimation Tower Lights Model PWE

PWE Series by Amerimation and Anderson-BoldsWall Mounted LED Tower Lights with Buzzer and flash capabilities
BUY HERE

Key Features

• Slim Profile Wall Mount
• Easy Mounted vertically and horizontally
• Equivalent brightness in every angle
• Steady and flashing lights
• Vibration and moisture resistant
• Chrome or tan colored body

Flash rate		Approx. 80 ± 10 flashes/min.
Buzzer sound level		85 ± 5dB at 1m
Vibration		3mm at 10~55Hz
Certificate/Compliance		UL, CE, RoHS
Ambient Temperature		-15 ~ 40 ̊C
Storage Temperature		-20 ~ 70 ̊C
Lens Material		PC Plastic
Ambient humidity		45 ~ 85% RH
Degree of Protection		IP65 (IP56 with buzzer)
Recommended wire size		UL1007/22AWG

Power Supply

12VAC/DC

24VAC/DC

90 ~240VAC

① Housing color

Cream C Chrome

② Light style

Steady F Steady & Flashing B Steady with buzzer Z Steady, flashing with buzzer

③ Number of stack

1 1 Light 2 2 Lights 3 3 Lights

④ Power supply

01 12VAC/DC 02 24VAC/DC FF 90~240VAC

⑤ Lens colors

R Red Y Yellow G Green B* Blue: 12V & 24V only

BUY HERE

Anderson-Bolds

216-360-9800

American Meter 1813C Regulators

Anderson-Bolds Stocks American Meter Series 1813C Regulators

The Elster American Meter 1800C Series pressure regulators are designed to control natural gas, air, nitrogen, carbon dioxide, propane vapor, and other non-corrosive gases in residential, light commercial, and small industrial applications.

General Information

Outlet pressures between 3.5" W.C. and 2 PSIG are available. Operating temperature range is -20°F to 150°F (-30°C to 65°C). Maximum flow rate is 2500 SCFH (70.8 m3/h).

All models conform to ANSI Code B109.4-1998, and CGA Service-Type Regulator Specification CAN/CGA-6.18-M95. 

Features

• Variety of interchangeable orifices and spring ranges

• 90 Degree (Right Angle), 180 Degree (Straight-Flow), or Offset Valve Body 

(See photo below)

• Wide range of valve body connection sizes 

Options:

Vent Elbow

The regulator vent opening should face downward (6 o'clock) to minimize the chance of blockage from ice and snow. If not possible, a 3/4" NPT plastic, 90° vent elbow (part number 78041P025) and separate protective screen (part number 70400P017) may be screwed into the vent to provide the necessary protection.

Elevation Compensation

The E.C. orifice is recommended for installations where the inlet pressure may vary over a wide range. The E.C. orifice is available in two sizes: 1/8" x 3/16" and 3/16". The capacities of these orifices are the same as the standard orifice of the same size.

Full Capacity Relief Valve Full capacity internal relief valve standard on all models. (See Performance Graphs on page 9)

SplashguardsUV stabilized, weather-resistant, resin device that protects the vent screen from splashes while providing a large external vent opening to keep regulators working properly.

Safety Shutoff Devices Overpressure Shutoff (OPSO) — Operates independently. The OPSO will shut off the gas supply in the event of a serious downstream pressure build-up. These are available in two pressure ranges on the Models 1843C and 1843C-HC.

When the outlet pressure exceeds the OPSO set point, the pressure under the OPSO diaphragm (A) compresses the pressure spring (B) forcing the diaphragm stem (E) upwards and releasing plunger (D). This permits the shut-off spring (F) to force the shut-off disc (G) against the back side of the special double-ended orifice.

Universal Safety Shutoff Assembly (USSA) — USSA protects the downstream piping from both over- and under-pressure conditions by shutting off the gas flow at the inlet side of the regulator orifice. Both Over- and under-pressure shut-off set points are adjustable depending on spring ranges selected.

To Buy, please click on the unit below


Elster American Meter 3/4 NPT model 1813C GAS regulator with 3/16 orifice, 6-15 WC spring

Elster American Meter 1 NPT model 1813C gas regulator with 1/8x3/16 orifice, 6-15 WC spring

Elster American Meter 1 NPT model 1813C gas regulator with 3/16 orifice, 6-15 WC spring

Elster American Meter 1 NPT model 1813C gas regulator with 5/16 orifice, 6-15 WC spring

Elster American Meter 1 NPT model 1813C gas regulator with 3/8 orifice, 6-15 WC spring

Elster American Meter 1 NPT model 1813C gas regulator with 9/16 orifice, 6-15 WC spring

Elster American Meter 1-1/4 NPT model 1813C gas regulator with 9/16 orifice, 6-15 WC spring





Anderson-Bolds
216-360-9800
www.anderson-bolds.com

Budzar Mold Temperature Controller

Anderson-Bolds Sells Budzar's Mold Temperature Controller.
The Best Mold Temperature Controller on the Market.  Made in the USA in Cleveland.

To Request a quote please fill out our Budzar Parts Form or go to our Contact Us page.

Unmatched reliability and power come to the production process through full feature temperature control in the smallest, best performing, best priced cabinet on the market, in its performance range. Optimize your injection molding and operation productivity with these Budzar Industries Mold Temperature Controllers, featuring total temperature control.

Features of the Mold Temperature Controller include:

• A non-proprietary “self-tuning” controller, continuously adjusts to the process to increase production rates, improve process consistency, reduce scrap and speed startup. Exclusive use of quality equipment: I.E.C. electrical components, non-overloading ODP motor, industrial duty pump with a 300°F rated EPDM HT Carbon/GI Silicar Seal and long life cooling valve work together to provide many years of outstanding service
• Flow rates are available from 20 to 110 GPM @ 30 PSI for turbulent flow. All units may be upgraded to 50 PSI
• Two quick release side panels and a heavy duty easy release clamp fitting for complete maintenance access
• Separate process and set point temperature display, return and supply pressure gauges and full lighted status display provide complete diagnostics
• 11” wide, 10” high and 24” long
• Five year controller warranty with continuous auto tune
• Temperature accuracy +/-1°
• Stainless steel brazed plate exchanged for closed loop cooling
• Each Mold Temperature Controller is factory tested prior to shipment

Models:

DIRECT INJECTION-SOLENOID COOLING VALVE

CLOSED LOOP-SOLENOID COOLING VALVE 

MTC-9-.75-.25-DS-460  9kw, .75hp, 460vac, 15 gpm, 30psi
MTC-9-1-.25-DS-460  9kw, 1hp, 460vac, 22 gpm, 30psi
MTC-9-1.5-.25-DS-460  9kw, 1.5hp, 460vac, 35 gpm, 30psi
MTC-9-2-.5-DS-460  9kw, 2hp, 460vac, 50 gpm, 30psi
MTC-9-3-.5-DS-460  9kw, 3hp, 460vac, 90 gpm, 30psi

DIRECT INJECTION MODULATING COOLING VALVE

CLOSED LOOP—MODULATING COOLING VALVE 

MTC-9-.75-.5-DW-460  9kw, .75hp, 460vac, 15 gpm, 30psi
MTC-9-1-.5-DW-460  9kw, 1hp, 460vac, 22 gpm, 30psi
MTC-9-1.5-.5-DW-460  9kw, 1.5hp, 460vac, 35 gpm, 30psi
MTC-9-2-.5-DW-460  9kw, 2hp, 460vac, 50 gpm, 30psi
MTC-9-3-.5-DW-460  9kw, 3hp, 460vac, 90 gpm, 30psi

12 and 18 kw units available; 230/3/60 electrics available 

MINI PORTABLE HOT WATER UNITS
Budzar's MTC (Mini Temperature Controller) Portable Hot Water System delivers full feature temperature control in the smallest cabinet on the market. The MTC, at 11" wide, 19" high and 24" long, is perfect for any industry process: rubber, plastics, pharmaceutical, chemical, power, steel, petroleum or food requiring a reliable temperature control unit with a small footprint.
The MTC brings unmatched reliability and power to your production process. The MTC eliminates pump failures by using industrial duty pumps with an EPDM Carbon/GI Silicar Seal rated up to 300o F. The standard 30 PSI discharge pressure delivers a powerful, turbulent flow. All units may be upgraded to 50 PSI. A continuous automatic air vent prevents heater burn-out and insures optimum heat transfer through your process. The MTC is built to deliver maintenance-free operation.
The brains of the MTC is a non-proprietary, full function PID controller that comes with a full 5 year warranty. "Continuous Self-Tuning" allows you to set the controller once and then forget it. The controller continuously adjusts the operation of the
MTC to optimize the productivity of your process. A bright dual display shows separate set point and process temperatures that are easy to read under any factory lighting. 

To Request a quote please fill out our Budzar Parts Form or go to our Contact Us page.

Anderson-Bolds
216-360-9800

BUDZAR ICE Chillers for Industry

Anderson-Bolds sells Budzar Air and Water Cooled ICE Chillers
Made in the USA in Cleveland, Ohio

To Request a quote please fill out our Budzar Parts Form or go to our Contact Us page.

Budzar Industries Portable Chillers with a Programmable Logic Controllers are designed to circulate a fluid medium between 20° – 70°F and are built to take the heat in an industrial duty application. The Air Cooled Portable Chillers features top quality non-proprietary components that will stand up to the process and plant environment. Each Industrial Portable Air Cooled Chiller is factory tested prior to shipping to ensure top quality.

Features of the Portable Air-Cooled and Water Cooled Chillers include:

• Programmable Logic Controller
• Non-Ferrous construction
• Stainless steel/brazed plate evaporator with copper pipe
• Extra large stainless steel reservoir
• Stainless steel pump
• Solenoid Valve
• Optional electronic hot gas by-pass valve provides excellent cooling capacity control
• Aluminum tank level gauge with built in thermometer
• Pump motor solid state overload protection
• Oversized refrigerant filter/drier
• Cleanable air inlet filters
• Lift-Off” easy to remove access panels
• Powder coated cabinet
• Pre-mounted condenser water regulating valve
• Factory tested prior to shipment

Air Cooled Model Numbers:

AC-.75: 3/4 HP, 115vac, 767 CFM, 5 gallons, 1/2" NPT, 220 lbs.
AC-1:  1 HP, 230/460vac, 712 CFM, 5 gallons, 1/2" NPT, 220 lbs.
AC-2:  2 HP, 230/460vac, 1704 CFM, 12 gallons, 1/2" NPT, 450 lbs.

AC-3:  3 HP, 230/460vac, 2420 CFM, 12 gallons, 3/4" NPT, 450 lbs.

AC-5:  5 HP, 230/460vac, 4237 CFM, 31 gallons, 3/4" NPT, 600 lbs.

AC-8:  8 HP, 230/460vac, 5300 CFM, 65 gallons, 1" NPT, 900 lbs.

AC-10: 10 HP, 230/460vac, 4900 CFM, 65 gallons, 1" NPT, 1000 lbs.

AC-15: 15 HP, 230/460vac, 12000 CFM, 65 gallons, 1.5" NPT, 1300 lbs.
AC-20: 20 HP, 230/460vac, 12000 CFM, 65 gallons, 1.5" NPT, 1300 lbs.

Water Cooled Model Numbers:

AC-3:  3 HP, 230/460vac, 7 GPM, 12 gallons, 3/4" NPT, 400 lbs.

AC-5:  5 HP, 230/460vac, 11 GPM, 31 gallons, 3/4" NPT, 600 lbs.

AC-8:  8 HP, 230/460vac, 16 GPM, 65 gallons, 1" NPT, 1000 lbs.

AC-10: 10 HP, 230/460vac, 22 GPM, 65 gallons, 1" NPT, 1200 lbs.

AC-15: 15 HP, 230/460vac, 16 GPM, 65 gallons, 1.5" NPT, 1400 lbs.

AC-20: 20 HP, 230/460vac, 21 GPM, 65 gallons, 1.5" NPT, 1600 lbs.

Budzar’s ICE (Industrial Chilling Equipment) Portable Chillers with a Pro- grammable Logic Controller (PLC) are built for top performance and engineered for bottom line control.
Designed to circulate a fluid medium between 20° - 70° for a wide variety of industries—rubber, tire plastic, paper, food, metal and pharmaceuticals, Budzar’s ICE Chillers are innovative, reliable and easily maintained.
Budzar’s ICE Chillers are constructed with a (PLC) Programmable Logic Controller. The PLC displays instrumentation information i.e.; pump dis- charge pressure and flow, compressor suction and discharge pressure as well as compressor pump status. The highly programmable PLC may be customized to your process and software may be updated via a program- ming key or transferred directly from a personal computer. The PLC also displays troubleshooting information and identifies and adjusts to marginal operating conditions. Additional features include a remote set-point and alarm, retransmission as well as self-testing, sensor failures and diagnostics.
ICE Chillers are built to take the heat in industrial duty application. Their top quality components will stand up to your process and plant environment. All components are non-proprietary. The best refrigeration components available have been selected, including a scroll compressor. Each units is factory tested prior to shipping to ensure top quality. 

To Request a quote please fill out our Budzar Parts Form or go to our Contact Us page.

Anderson-Bolds
216-360-9800

Budzar Silver Series Hot Oil Temperature Controllers

Anderson-Bolds Sells Budzar Hot Oil Heat Transfer Units

To Request a quote please fill out our Budzar Parts Form or go to our Contact Us page.

Budzar Industries Silver Series Portable Hot Oil unit with a maximum temperature of 600°F, easy to use and understand controls and a premium on operator safety will stand the test of time.

Features include:

• Welded pipe construction eliminates leaks
• Compact space saving design
• Carbon steel powder coated steel metal cabinet with lift off panel for ease of maintenance
• Ultra low heater watt density prevents “coking” and extends useful life of oil
• Y-strainer on pump suction line
• Internal by-pass valve maintains proper flow across the heater regardless of the pressure drop through the process
• Automatic oil and water vapor purging system simplifies start-up and prevents pump cavitation
• Heater case design eliminates air pockets that can damage the heater element
• Heater center core baffles increase oil velocity and prevent damage to the oil
• Factory tested prior to shipment

Budzar Silver Series Hot Oil Unit

Models:

12 KW MODELS - 230 OR 460 VAC, 49x28x48 inches

1220-NC-030 - 1 hp and 30 psi

1220-NC-050 - 1.5 hp and 50 psi

1220-NC-100 - 2 hp and 100 psi

1230-NC-030 - 1.5 hp and 30 psi

1230-NC-050 - 2 hp and 50 psi
1230-NC-100 - 3 hp and 100 psi
1250-NC-030 - 2 hp and 30 psi
1250-NC-050 - 3 hp and 50 psi
1250-NC-100 - 5 hp and 100 psi

24 KW MODELS - 230 OR 460 VAC, 49x28x48 inches

2420-NC-030 - 1 hp and 30 psi

2420-NC-050 - 1.5 hp and 50 psi

2420-NC-100 - 2 hp and 100 psi

2430-NC-030 - 1.5 hp and 30 psi

2430-NC-050 - 2 hp and 50 psi
2430-NC-100 - 3 hp and 100 psi
2450-NC-030 - 2 hp and 30 psi
2450-NC-050 - 3 hp and 50 psi
2450-NC-100 - 5 hp and 100 psi

36 KW MODELS - 230 OR 460 VAC, 73x28x48 inches

3620-NC-030 - 1 hp and 30 psi

3620-NC-050 - 1.5 hp and 50 psi

3620-NC-100 - 2 hp and 100 psi

3630-NC-030 - 1.5 hp and 30 psi

3630-NC-050 - 2 hp and 50 psi
3630-NC-100 - 3 hp and 100 psi
3650-NC-030 - 2 hp and 30 psi
3650-NC-050 - 3 hp and 50 psi
3650-NC-100 - 5 hp and 100 psi

48 KW MODELS - 230 OR 460 VAC, 73x28x48 inches

4820-NC-030 - 1 hp and 30 psi

4820-NC-050 - 1.5 hp and 50 psi

4820-NC-100 - 2 hp and 100 psi

4830-NC-030 - 1.5 hp and 30 psi

4830-NC-050 - 2 hp and 50 psi
4830-NC-100 - 3 hp and 100 psi
4850-NC-030 - 2 hp and 30 psi
4850-NC-050 - 3 hp and 50 psi
4850-NC-100 - 5 hp and 100 psi

Options:

• Side Stream Cooling, Water Cooling 5 sq. ft
  
• Main Stream Cooling, Water Cooling 5 sq. ft
  
• Solid State Relays
  
• Isolation Valves
  
• RS-485 Digital Communications 
  
  
  
  • Upgrade to 600°F Maximum Temperature 
  • Dual Zone
  • Hose Kit
  • Retransmission/Remote Set Point
  • Hoffman NEMA 12 enclosure 

Budzar Industries has over 30 years of experience engineering and building hot oil systems. Budzar engineers are experts at ensuring hot oil systems are accurate, leak-free and safe.
The Silver Series with its maximum operating temperature of 600°F shares the same engineering principles as Budzar’s high temperature oil systems. With simple and easy to understand controls and a premium on operator safety, the Silver Series will stand the test of time. 

To Request a quote please fill out our Budzar Parts Form or go to our Contact Us page.

Anderson-Bolds
216-360-9800