Monday, June 21, 2021

FMX co-ax Valves

 New FMX co-ax Valves for Industry from Anderson-Bolds

Since its foundation over 15 years ago, co-ax valves inc. has been the central core for parent company, müller co-ax ag’s cultivation of US partnerships — bringing its cutting edge valve expertise for the control of vacuums and gaseous, liquid, gelatinous, abrasive, con­ta­mi­na­ted and aggressive media, to the forefront of the American market. Today, müller co-ax ag continues to expand its international presence, providing customers and industries world­wide with the exceptional customer service focus that the company has maintained over its 50-year history.


New co-ax coaxial FMX Valves

co-ax FMX Coaxial Valve











co-ax FMX® valves are characterized by high flow rate with compact design and low weight. The externally controlled 2/2-way valve can be controlled via a 3/2-way pilot valve as well as a valve cluster. The pneumatic cylinder has three “T” grooves that can be used to add on accessories such as mounting brackets and limit switches. The FMX® valve series offers a manifold option as well; The inlet A-port on the 2/2-way valve is designed to be quickly and easily installed into the manifold strip.


The technology in the co-ax FMX series stands for higher flow rates compared to other valves. Or are you looking for compactness? COAX FMX valves occupy just a small installation space, while offering the same speed and quality.

The co-ax FMX series impresses with its small and compact size and extremely low weight. With an installation length of 110 mm, the FMX-2 just weighs 0.6 kg, while impressing with an unbeatable Kv value at the same time.

Due to the pressure-equalized design, the operating pressure of 16 bar remains unaffected by the control pressure. Hence, only one actuator size is required. The compact design allows a very low control air consumption compared to other valves.

By default, all components which are getting in contact with the media are made of stainless steel. Furthermore, high-quality sealing materials are used. The applications encompass media such as air, water, oils, fuels, neutral gases and much more.

The co-ax valves of the FMX-series have bi-directional flow. You are able to decide the direction in which your medium should flow, as the FMX valves are back pressure tight up to a max. of 16 bar.

You have to be able to rely completely on every single component in your system. The co-ax FMX series is something you install and will never see again — not because they are so small, but because they are absolutely robust and reliable, and hence have a high life expectancy.

As a connection variant, the proven bushing screw thread in accordance with DIN ISO 228-1 is available. Via a smart interface, it is possible to rapidly and straightforwardly integrate single valves into a valve manifold.

COAX FMX valves are externally operated 2/2-way valves which can be controlled via a 3/2-way pilot valve as well as via a valve terminal. The valves can be flexibly expanded later on with accessories such as mounting brackets and limit switches.








FMX-2  -  1/2 inch or 3/8 inch size, 24vdc, 110vac, 230vac (NO or NC)

FMX-3  -  1/2 inch or 3/4 inch size, 24vdc, 110vac, 230vac (NO or NC)

FMX-4  -  3/4 inch or 1 inch size, 24vdc, 110vac, 230vac (NO or NC)

FMX-5  -  1 inch or 1-1/4 inch size, 24vdc, 110vac, 230vac (NO or NC)

Contact Anderson-Bolds  HERE!

For over 60 years, müller co-ax ag has been an innovative leader in the unique design and manufacture of coaxial valve technology for businesses worldwide. Based out of Forchtenberg Germany, the company has grown from the humblest of beginnings into the industry standard for valve technology that it is today. In 1997, müller co-ax ag sought to better serve the needs of its rapidly growing US customer base through the establishment of its first subsidiary abroad: co-ax® valves inc. in Bristol, Pennsylvania.

Anderson-Bolds
216-360-9800
www.anderson-bolds.com

Monday, June 14, 2021

Q'Mark's New Cabinet Unit Heater

 Marley Q'Mark announces The new CUH Cabinet Unit Heater

Please contact Anderson-Bolds HERE!


View Q'Mark CUH video


Marley Engineered Products introduces the CUH Series Custom Cabinet Unit Heater, which delivers supplemental comfort heat in a contemporary design to match modern and future architect specifications. The unit is operated by the new SmartSeries® Plus, a digital touchscreen control capable of running a fully programmable internal schedule as well as connecting to a BACnet Building Management System.

“The Marley Cabinet Unit Heater offers 16 air inlet/outlet combinations that are all field-changeable for wall or ceiling placement, is easy to install and maintain and features a robust design,” said Kyle Jason, product manager for Marley Engineered Products. “The unit is ideal for a variety of spaces requiring supplemental heat including school hallways, church vestibules, transportation terminals, stairwells, entrances, lobbies, mechanical rooms and more.”

The CUH Series Cabinet Unit Heater features a standard stamped grille with optional ducted grilles and a hinged front panel for one-person maintenance on ceiling applications. A front cover interlock de-energizes the unit when the front cover is removed for added safety. A disposable air filter is mounted in the inlet air stream or choose an optional permanent and washable aluminum filter.

Feature a robust design, the cabinet is constructed of heavy 16-gauge cold-rolled steel to provide strength and finished with a polyester powder coating for corrosion resistance. Motors are mounted with automatic thermal overload protection and motor fuse protection is provided on all heaters to meet safety requirements.

“Each unit comes standard with two thermal safety cutouts to automatically shut off and protect the heater in the event of overheating,” said Jason. “The unit will reactivate when operation temperature returns to normal.”

The Custom Cabinet Unit Heater offers a temperature range of 50 to 100 degrees F. It is available in white, beige, charcoal gray, aluminum, statuary bronze, desert tan or gloss black. Custom colors are available upon request. 

The new CUH, Cabinet Unit Heater is operated by the new SmartSeries® Plus, a digital touchscreen control capable of running a fully programmable internal schedule as well as connecting to a BACnet Building Management System.

New Smart Q'MArk CUH Cabinet Unit Heater
























Contemporary Aesthetics
  • Contemporary design to match modern and future architect specifications
  • ​Standard stamped grille with optional ducted grilles
 
Easy Install and Maintenance
  • One-person maintenance on ceiling applications with hinged front panel
  • Front cover interlock de-energizes unit when front cover is removed for added safety
  • Disposable air filter mounted in inlet air stream; optional permanent and washable aluminum filters available

Robust Design
  • Cabinet constructed of heavy 16-gauge cold-rolled steel to provide strength and finished with a polyester powder coating for corrosion resistance
  • Motors are mounted with automatic thermal overload protection; motor fuse protection is provided on all heaters to meet safety requirements
  • Comes standard with two thermal safety cutouts to automatically shut off and protect the heater in the event of overheating. Reactivates the heater when operating temperature returns to normal

SmartSeries® Plus Control features:
Intelligent Controls for Intelligent Buildings
  • This control comes ready to connect to your Building ManagementSystem using BACnet MS/TP protocol. With just a few button presses on the digital touchscreen and simple 2 wire connection, you will have full control over your electric heater in no time

Reduced Operations & Maintenance Time
  • Use of BMS saves facility manager time and personnel cost by eliminating the need to travel to the heater site and inspect and diagnose root cause
  • Contains 2 scheduling modes: Setpoint Mode (Heating Mode) and Dual Setpoint Mode (Heating & Cooling, Fan Only). Run the heater only when directed by the internal schedule of the BMS

Control at your Fingertips
  • No BMS? No Problem! You can still get heat when and where you need it by using the built in 7 day programmable scheduling feature
  • Occupancy Settings: Quickly Schedule multiple periods per day, at your desired temperature, for operation based on when you expect occupants to use your space. Comes with ‘Copy’ function for quick settings of known repeat occupancy periods

Other Features
  • Lockable Key Pad – Protects the unit from unauthorized access and/or tampering giving you peace of mind the heater is running the way you want it to
  • Temperature Override – Control your comfort even further by allowing users to set a temperature above programmed setpoints for up to 4 hours in an unoccupied state

*Optional feature. Contact sales representative or factory regarding optional features available, including: built-in fan switch; 120V control, electronically controlled outside air damper; inlet and discharge duct collars; dead-front and fused dead-front disconnect switches; built-in night set back relay; and trim kits. See page 39 to find out how to order cabinet unit heaters

Sizes:

CU935 - 35 inch in length, 120 pounds, 250 CFM

2,3,4,5,6,7,8 KW and 208/1/60, 208/3/60, 240/1/60, 240/3/60, 277/1/60, 480/3/60

CU945 - 45 inch in length, 160 pounds, 500 CFM

4,6,8,10,12*,14*,16* KW and 208/1/60, 208/3/60, 240/1/60, 240/3/60, 277/1/60, 480/3/60

CU968 - 68 inch in length, 260 pounds, 750 CFM

15*,21*,24* KW and 208/1/60, 208/3/60, 240/1/60, 240/3/60, 277/1/60, 480/3/60

CU978 - 78 inch in length, 300 pounds, 750 CFM

20*,24*,28*,32* KW and 208/3/60, 240/1/60, 240/3/60, 277/1/60, 480/3/60

* not all voltages are available and some require circuit breakers of fused disconnects.


email to:  qmark@anderson-bolds.com

Anderson-Bolds
216-360-9800
www.anderson-bolds.com

Wednesday, June 9, 2021

Q'Mark In Floor Unit Heater Model THX

 Q'Mark THX in floor convector Heater from Marley

In-Floor Convector - THX Series

For Information Contact Anderson-Bolds HERE!

THE OUT-OF-SIGHT, OUT-OF-MIND, UL LISTED IN-FLOOR PERIMETER TRENCH HEATER
THX zero vertical profile eliminates visual disruptions while preserving the building’s heat envelope and amplifying building aesthetics. Maximize building comfort and reclaim floor space with the most compact, in-floor convector on the market today.

Brought to you by Marley Engineered Products—a trusted leader in comfort solutions—THX is designed with durability in mind to withstand daily cleaning, water and debris. 

IDEAL SPACES | 
      Conference rooms, Hallways, Lobbies & Offices

Convector Heater for In-Floor Installations
Q'Mark / Marley






PRODUCT INNOVATIONS AND KEY FEATURES |

      Maximize Building Comfort
      THX directly addresses the building's need for supplemental heat against the curtain walls and glazing, while fully integrating with the architects' designed interior spaces. Whether you are starting a new building project or adding to an existing spec, count on the THX to deliver desired performance through unique features and flexible installation options. From design to installation and servicing, the THX is built to be quickly, easily installed and maintained in order to provide the superior comfort solutions your client demands.

      Product Innovations

  • Maintain the building’s heat envelope
  • UL listed out-of-the-box with sealed j-boxes
  • Maximum performance but hidden

      Key Features

  • Easy extensibility
  • Easy mounting
  • Easy installation & maintenance
  • Invisible heat source
  • Rated for high traffic areas

TECHNICAL SPECIFICATIONS |
      Grille Colors

      White, Aluminum & Black

      Grille Types

      Flush or Surface

      Cabinet/Enclosure

  • 16-gauge galvanneal steel enclosure
  • 1/2" and 3/4" electrical knockouts on each end, side and bottom

      Size

  • Low profile 6 1/3" wide by 7 7/8" deep
  • Available in lengths 2' to 5'
  • Standard unit connection kit for lengths beyond 5 ft.

      Heating Volume & Outputs

  • Single phase, 208V, 240V and 277V models available
  • 188 or 250 watts per foot

      Heating Elements

  • Nickle-Chromium wire heating element encased in steel sheath with aluminum fins (standard)
  • Stainless steel heating element with aluminum fins (optional)

      Wiring & Electrical

  • UL Listed with sealed junction boxes
  • All controls included in unit so no need for additional control boxes
  • End connection points and wire-way
  • Dual safety limit chain with both manual and automatic reset

      Water & Debris Management

  • Debris catch screen included
  • UL Listed for water management
  • Elements and connection points are raised off the floor

      Optional Built-In Controls

  • On/Off Switch: for easy and safe servicing
  • Power Relay: for BMS connections
  • Transformer Relay: for remote wall thermostat


THXQ 02188 - 2Ft, 188 watts/Ft., 376 watts, 208, 240, 277 voltages, 30 pounds

THXQ 02250 - 2Ft, 250 watts/Ft., 500 watts, 208, 240, 277 voltages, 30 pounds

THXQ 03188 - 3Ft, 188 watts/Ft., 564 watts, 208, 240, 277 voltages, 40 pounds

THXQ 03250 - 3Ft, 250 watts/Ft., 750 watts, 208, 240, 277 voltages, 40 pounds

THXQ 04188 - 4Ft, 188 watts/Ft., 752 watts, 208, 240, 277 voltages, 52 pounds

THXQ 04250 - 4Ft, 250 watts/Ft., 1000 watts, 208, 240, 277 voltages, 52 pounds

THXQ 05188 - 5Ft, 188 watts/Ft., 940 watts, 208, 240, 277 voltages, 60 pounds

THXQ 05250 - 5Ft, 250 watts/Ft., 1250 watts, 208, 240, 277 voltages, 60 pounds


email to:  qmark@anderson-bolds.com


Anderson-Bolds
216-360-9800
www.anderson-bolds.com