Penberthy ELL Eductors Jet Pumps for Industry

Penberthy ELL style Jet Pumps Eductors by Emerson

Buy Penberthy ELL Jets HERE!

Emerson ELL Eductor Jet Pump

Features of Emerson Jet Pumps

•   Simple design with no moving parts to wear out.

•   No lubrication required.

•   Virtually maintenance-free.

•   Easy to install without special structures or foundations.

•   Self-priming.

•   Cast, fabricated or non-metallic constructions.

•   Variety of materials to suit specific characteristics of the process liquids.

•   Critical flow paths machined smoothly with no abrupt turns or steps, producing the most efficient flow during the motive function.

Applications for Penberthy ELL eductors/jet pumps

Applications include creating vacuums, exhausting vapors from process systems, evacuating tanks and vessels, scrubbing a gas to remove contaminants, priming, fume removal, fluid concentration, humidifying and condensing, drying, distilling and deaerating gas. 

Models LM and ELL are used for exhausting, evacuating and priming operations where a liquid operating medium is available. They are available with suction and discharge fittings ranging from 1⁄2” to 12”, depending on the type of construction. 

Bronze – Penberthy Emerson ELL series Jet Pumps

Size	SAP #	Description
1/2B	11347003	ELL4BBZCNTNTNT-01
1/2	11338637	ELL04BZCNTNTNT-01
3/4	11339186	ELL06BZCNTNTNT-01
1	11338692	ELL08BZCNTNTNT-01
1 1/4	11344486	ELL10BZCNTNTNT-01
1 1/2	11338809	ELL12BZCNTNTNT-01
2	11340566	ELL16BZCNTNTNT-01
2 1/2	11410271	ELL20BZCNTNTNT-01
3	11449526	ELL24BZCNTNTNT-01
4	TBD	ELL32BZCNTFFFF-01

Cast Iron – Emerson Penberthy ELL series Jet Pumps

Size

SAP #

Description

1/2B	TBD	ELL4BIRCNTNTNT-01
1/2	11340840	ELL04IRCNTNTNT-01
3/4	11338643	ELL06IRCNTNTNT-01
1	TBD	ELL08IRCNTNTNT-01
1 1/4	11421458	ELL10IRCNTNTNT-01
1 1/2	11340058	ELL12IRCNTNTNT-01
2	TBD	ELL16IRCNTNTNT-01
2 1/2	11347140	ELL20IRCNTNTNT-01
3	11341906	ELL24IRCNTNTNT-01
4	11452316	ELL32IRCNTFFFF-01

Carbon Steel – Penberthy Emerson ELL series Jet Pumps

Size

SAP #

Description

1/2B	TBD	ELL4BCSCNTNTNT-01
1/2	TBD	ELL04CSCNTNTNT-01
3/4	11340185	ELL06CSCNTNTNT-01
1	11343148	ELL08CSCNTNTNT-01
1 1/4	11345161	ELL10CSCNTNTNT-01
1 1/2	11342064	ELL12CSCNTNTNT-01
2	11344755	ELL16CSCNTNTNT-01
2 1/2	11354903	ELL20CSCNTNTNT-01
3	11342909	ELL24CSCNTNTNT-01
4	TBD	ELL32CSCNTRFRF-01

Stainless Steel – Emerson Penberthy ELL series Jet Pumps

Size

SAP #

Description

1/2B	TBD	ELL4BSSCNTNTNT-01
1/2	11341850	ELL04SSCNTNTNT-01
3/4	11345852	ELL06SSCNTNTNT-01
1	11342044	ELL08SSCNTNTNT-01
1 1/4	11343198	ELL10SSCNTNTNT-01
1 1/2	11342151	ELL12SSCNTNTNT-01
2	11339512	ELL16SSCNTNTNT-01
2 1/2	11340167	ELL20SSCNTNTNT-01
3	11342692	ELL24SSCNTNTNT-01
4	TBD	ELL32SSCNTRFRF-01

Operation of Jet Pumps

All jet pumps operate on the principle of a fluid entraining a second fluid. although design and construction may vary, this applies to all jet pumps.

All jet pumps have three common features: inlet, suction and discharge. 

They function as follows:

Inlet - The operating medium (liquid, steam or air) under pressure enters the inlet and travels through the nozzle into the suction chamber. The nozzle converts the pressure of the operating medium into a high velocity stream, which passes from the discharge side of the inlet nozzle.

Suction - Pumping action begins when vapor, gases or liquid in the suction chamber are entrained by the high velocity stream emerging from the inlet nozzle, lowering the pressure

in the suction chamber. The resulting action causes the liquid, gas or vapor in the suction chamber to flow toward the discharge. 

Discharge - The entrained material from
the suction system mixes with the operating medium and acquires part of its energy in the parallel section. in the diffuser section, part
of the velocity of the mixture is converted to a pressure greater than the suction pressure, but lower than the operating medium pressure. 

Buy Penberthy ELL Jet Pumps HERE!

Anderson-Bolds - 216-360-9800
Cleveland, Ohio
www.anderson-bolds.com