ATC 355C Shawnee II Digital Reset Timer
from Anderson-Bolds
Automatic Timing and Control - Timers and Counters
The ATC 355C Shawnee Timer Directly replaces the 355A and 355B ATC Timers.
The ATC 355C Shawnee Timer is a functional replacement for the 335 ATC Timer.
 |
| ATC 355C Shawnee II Timer |
About the AUTOMATIC TIMING AND CONTROLS (ATC) 355C Series Shawnee II Digital Reset Timer from the Automatic Timing and Controls Division of Marsh Bellofram Corporation:
A compact version of the ATC 335 Timer, the ATC 355C is its exact functional duplicate, packaged in a 72 mm2 DIN-Size housing, it occupies 40% less panel space and costs proportionately less. Modern production and assembly techniques have all but eliminated hand wiring, enhancing the reliability and life expectancy of the ATC 355C.
COMPUTER TESTED RELIABILITY: The Solid-State ATC 355C is manufactured from a series of computer-tested plug-in circuit boards and assembled virtually without hand wiring. Because it has no moving parts in its logic circuits, its life expectancy is practically unlimited. Even the load relay — the 355C’s only significant mechanical component — has a life expectancy of 100,000,000 operations (no load). As a result, the Automatic Timing and Control 355C achieves an overall reliability that surpasses even the high level achieved by previous Shawnee timers.
CYCLE PROGRESS INDICATION: The Shawnee indicating 355C timer provides cycle progress indication on a four-digit display located immediately above the digital setting number wheels.
PLUG-IN AND DUST-TIGHT: All ATC 355C timers feature true plug-in design and can be replaced in seconds without disturbing the housing or disconnecting the wiring. The dial assembly is gasketed so that the timer body is dust-tight from the front of panel.
WIDE RANGE: Each ATC Shawnee 355C timer covers the overall span of 0.01 sec to 999.9 min in two field-convertible ranges. The 355C indicating timer also offers two additional field-convertible ranges of 0.1-999.9 sec or min.
EASY TO SET AT ALL TIMES: The Shawnee ATC timer is easily and accurately set even with work gloves on. Push any of its four toggle levers in any sequence until the number you want appears above it. You can decrease as well as increase each number by pushing the levers up or down. You can change the setting at any time, even during a cycle.
SAVE 40% IN PANEL SPACE AND COST: Packaged in a 72mm2 DIN-size housing, the ATC 355C occupies 40% less panel space than previous IC timers. Modern production and assembly techniques have substantially reduced manufacturing costs and resulted in a 45% cost saving.
OUTSTANDING REPEAT ACCURACY: Unsurpassed among industrial timers regardless of cost, the Shawnee has a repeat accuracy of ±10 milliseconds on any setting within its overall range of 999.9 min., even in the face of wide swings in temperature or voltage and regardless of the amount of reset time between cycles.
NOISE IMMUNITY: The ATC 355C does not have to be shielded: its transformer power supply, full-wave bridges, buffered logic and other design characteristics render it immune to the electrical noise that is encountered in typical industrial environments.
ATC 355C351A30PX 120V 99.99 second rangeATC 355C352A30PX 120V 99.99 minute range
ATC 355C351B30PX 240V 99.99 second range
ATC 355C352B30PX 240V 99.99 minute range
ATC 355C346A30PX 120V 999.9 second range
ATC 355C346B30PX 240V 999.9 second range
ATC 355C347A30PX 120V 999.9 minute range
ATC 355C347B30PX 240V 999.9 minute range
Anderson-Bolds
216-360-9800
ATC 355C...ATC 355C...ATC 355C...ATC 355C...ATC 355C...ATC 355C
No comments:
Post a Comment