Anderson-Bolds Sells the Robertshaw EURO 366 VIBRASWITCH
Click HERE for the Robertshaw Vibration Switch Matrix
CONTACT US
VIBRASWITCH MALFUNCTION DETECTOR Model EURO 366
by Schneider Electric and Robertshaw Industrial
The EURO366 Vibraswitch malfunction detector provides maximum protection from rotating and reciprocating of large motors, pumps or compressors. It is intended for indoor or outdoor use in hazardous or non-hazardous areas with ATEX and CE certifications.
Anderson-Bolds
216-360-9800
www.anderson-bolds.com
Click HERE for the Robertshaw Vibration Switch Matrix
CONTACT US
VIBRASWITCH MALFUNCTION DETECTOR Model EURO 366
by Schneider Electric and Robertshaw Industrial
FEATURES AND BENEFITS
-
Flame Proof (Explosion Proof )
EEx d IIB/C T6 IP66 T85°C - CESI 03 ATEX 186
-
Self Powered
Does not require any form of external power to operate.
-
Acceleration Sensitive
Measures total destructive shock, not displacement.
-
Minimum Maintenance
No moving parts except when set-point is exceeded.
-
Continuous Protection
No attention required after installation.
-
Ease of Installation
Requires no special training.
-
Long Life
Instrument is rugged and durable - no wearing parts.
-
Reset
Manual at unit and choice of remote electrical.
-
AC or DC
Reset coil options.
-
IP66 Enclosure
For outdoor and indoor use.
EURO366 from Robertshaw
The EURO366 Vibraswitch malfunction detector provides maximum protection from rotating and reciprocating of large motors, pumps or compressors. It is intended for indoor or outdoor use in hazardous or non-hazardous areas with ATEX and CE certifications.
The Model EURO 366 VIBRASWITCH is primarily
intended for indoor and outdoor hazardous and non-
hazardous areas in those countries requiring ATEX
and CE certifications. The EURO 366 employs the
same time proven switch design found in Robertshaw's
family of vibration switches.
The Model EURO 366 VIBRASWITCH is a vibration sensitive device that protects rotating and reciprocating machinery from extensive damage resulting from mechanical malfunction.When the vibration level of a VIBRASWITCH protected machine exceeds normal by a preselected amount, the normally open contacts of an internal switch close and the normally closed contacts open. This can be used to actuate either an audible warning system or a shutdown circuit before costly damage occurs
Failing bearings, broken blades and similar malfunctions cause increased imbalance or high frequency vibration detectable with the VIBRASWITCH. It is designed for maintenance-free service in permanent installations.
The VIBRASWITCH is an acceleration sensitive instrument that measures the total acceleratory shock present on the machine. Acceleration is a vibration characteristic of prime importance in cases of mechanical failure on reciprocating or rotating machinery. Acceleration is directly related to the shock forces (impact) acting on a machine - thus the VIBRASWITCH offers a valid measurement of the destructive forces acting on the machine.
Accelerator measurements made by the VIBRASWITCH are the summation of all of the individual accelerations giving a total destructive force acting on the machine - the result is positive protection.
The Model EURO 366 VIBRASWITCH is a vibration sensitive device that protects rotating and reciprocating machinery from extensive damage resulting from mechanical malfunction.When the vibration level of a VIBRASWITCH protected machine exceeds normal by a preselected amount, the normally open contacts of an internal switch close and the normally closed contacts open. This can be used to actuate either an audible warning system or a shutdown circuit before costly damage occurs
Failing bearings, broken blades and similar malfunctions cause increased imbalance or high frequency vibration detectable with the VIBRASWITCH. It is designed for maintenance-free service in permanent installations.
The VIBRASWITCH is an acceleration sensitive instrument that measures the total acceleratory shock present on the machine. Acceleration is a vibration characteristic of prime importance in cases of mechanical failure on reciprocating or rotating machinery. Acceleration is directly related to the shock forces (impact) acting on a machine - thus the VIBRASWITCH offers a valid measurement of the destructive forces acting on the machine.
Accelerator measurements made by the VIBRASWITCH are the summation of all of the individual accelerations giving a total destructive force acting on the machine - the result is positive protection.
SPECIFICATIONS
ENVIRONMENTAL
Enclosure..................... Cast aluminum UNI 4514 alloy
Weight ....................... 2.2 kg (4.9 lb)
Enclosure Classification........ Flame (Explosion) proof
EEx-d-IIA/B/C-T6 IP66 T85 C
Flame Proof Certification.........ESI 03 ATEX 186
Enclosure Protection................IP66 Standard
Enclosure Sealing ..................Neoprene o-ring
Enclosure Finish......... Polyurethane painted olive drab
Mounting Location.......... Outdoors, unprotected
External Bolts ................ Stainless steel
Nameplate .................... Stainless steel
Conduits .......................2 x 3/4" UNI 6125-74 (will accept 3/4 NPT fitting)
Ambient Temperature Limits .......... -30 C to +85 C (-22 F to +185 F)
Humidity .............................. To 95% relative humidity @ 37.7 C (100 F)
Shock ...................................... 40 g @ 11 ms maximum
ENVIRONMENTAL
Enclosure..................... Cast aluminum UNI 4514 alloy
Weight ....................... 2.2 kg (4.9 lb)
Enclosure Classification........ Flame (Explosion) proof
EEx-d-IIA/B/C-T6 IP66 T85 C
Flame Proof Certification.........ESI 03 ATEX 186
Enclosure Protection................IP66 Standard
Enclosure Sealing ..................Neoprene o-ring
Enclosure Finish......... Polyurethane painted olive drab
Mounting Location.......... Outdoors, unprotected
External Bolts ................ Stainless steel
Nameplate .................... Stainless steel
Conduits .......................2 x 3/4" UNI 6125-74 (will accept 3/4 NPT fitting)
Ambient Temperature Limits .......... -30 C to +85 C (-22 F to +185 F)
Humidity .............................. To 95% relative humidity @ 37.7 C (100 F)
Shock ...................................... 40 g @ 11 ms maximum
PERFORMANCE
Vibration Measurement Range (Peak)
Mounted Horizontal....0 to 4.5 g from 0 to 300 Hz
Mounted Vertical........0 to 3.5 g from 0 to 300 Hz
Set Point Adjustment ................................. 1 turn per g
Accuracy .............. 5% of full range from 0 to 300 Hz
Ambient Temperature Effect ........ 10%/55.5 C /(132 F) maximum
Common Part Numbers are:
EURO366-A0-H2-A-FX-X
EURO366-A2-H2-A-FX-X
EURO366-A4-H2-A-FX-X
EURO366-A7-H2-A-FX-X
EURO366-A8-H2-A-FX-X
EURO366-A9-H2-A-FX-X
↑Above switches are SPDT
↓Below Switches are DPDT
EURO366-D0-H2-D-FX-X
EURO366-D2-H2-D-FX-X
EURO366-D4-H2-D-FX-X
EURO366-D7-H2-D-FX-X
EURO366-D8-H2-D-FX-X
EURO366-D9-H2-D-FX-X
CONTACT Anderson-Bolds - info@anderson-bolds.com
Vibration Measurement Range (Peak)
Mounted Horizontal....0 to 4.5 g from 0 to 300 Hz
Mounted Vertical........0 to 3.5 g from 0 to 300 Hz
Set Point Adjustment ................................. 1 turn per g
Accuracy .............. 5% of full range from 0 to 300 Hz
Ambient Temperature Effect ........ 10%/55.5 C /(132 F) maximum
Common Part Numbers are:
EURO366-A0-H2-A-FX-X
EURO366-A2-H2-A-FX-X
EURO366-A4-H2-A-FX-X
EURO366-A7-H2-A-FX-X
EURO366-A8-H2-A-FX-X
EURO366-A9-H2-A-FX-X
↑Above switches are SPDT
↓Below Switches are DPDT
EURO366-D0-H2-D-FX-X
EURO366-D2-H2-D-FX-X
EURO366-D4-H2-D-FX-X
EURO366-D7-H2-D-FX-X
EURO366-D8-H2-D-FX-X
EURO366-D9-H2-D-FX-X
CONTACT Anderson-Bolds - info@anderson-bolds.com
Anderson-Bolds
216-360-9800
www.anderson-bolds.com
No comments:
Post a Comment