Cross Reference between Penberthy and Jacoby Eductors.
Providing a practical alternative to more complicated and expensive methods, Penberthy jet pumps offer simple, more cost-effective ways to pump, mix or heat a wide range of liquids and gases used in the process industry. Jet pumps can operate with a wide variety of motive liquids and gases. If you recognize any of the following, you can probably use a Penberthy jet pump.
• Injectors • Exhausters • Ejectors • Siphons
• Eductors • Boosters • Kinematic Pumps
Penberthy jet pumps have a myriad of uses. Jet pumps not only pump liquids, they can also heat, mix, and blend either in-line or in a tank. Jet pumps can evacuate gases, create a vacuum, boost suction pressures, mix granular solids with liquids and move granular solids with compressed air. In fact, you will be surprised at what a jet pump can do to solve your problem.
| Penberthy Model LL | Jacoby Model SL |
| Penberthy Model LM | Jacoby Model ML |
| Penberthy Model LH | Jacoby Model HL |
| Penberthy Model GL | Jacoby Model SG |
| Penberthy Model GH | Jacoby Model HG |
| Penberthy Model HLM | Jacoby Model MLH |
| Penberthy Model ELL | Jacoby Model MLE |
| Penberthy Model RJ | Jacoby Model MLE |
| Penberthy Model CTE | Jacoby Model TLA |
| Penberthy Model TME | Jacoby Model TLM |
Liquid Motive Eductors are the LL, LM and LH models.
Water is the usual liquid motive.
LL series - 15-200 psig (100-1380 kPag) - Head pressure to to 50 ft. (15.2 m)–H2O
LH series - 15-200 psig (100-1380 kPag) - Head pressure 40 to 80 ft. (12.2-24.4 m)–H2O
LH series - 15-200 psig (100-1380 kPag) - Head pressure 80 ft. (24.4 m) or more–H2O
Gas or Steam motive Eductors are the GL and GH models.
Another method of pumping liquids is to use steam as the motive. This type of jet pump works best
in applications where a minimal amount of infusion of the motive media with the liquid to be transported is required. Quiet operating steam motive jet pumps, like liquid motive pumps, are simply designed with no packing glands and no moving parts to wear out.
GL model eductor
Motive steam pressure to elevate liquid 50 ft. (15.2 m)
150 psig (1035 kPag)
Motive steam pressure range : 60-150 psig
Suction lift–water temp. to 120° F (49° C) : up to 20 ft. (6.1m)
Minimum NPSH : 13 ft. (4 m)
GL model eductor
Motive steam pressure to elevate liquid 50 ft. (15.2 m)
75 psig (520 kPag)
Motive steam pressure range : 35-150 psig
Suction lift–water temp. to 120° F (49° C) : up to 20 ft. (6.1m)
Minimum NPSH : 13 ft. (4 m)
Penberthy Models LM, ELL and FL are perfect for many gas pumping operations where more costly and complicated pumps have been used. Imagine being able to use a jet pump to: create a vacuum, evacuate gases from tanks and vessels, scrub a gas to remove contaminants, remove fumes, for gas condensation, drying, distillation, deaeration and more.
Model ELL
Motive medium pressure range : 20-200 psig
suction range 1-27 inches Hg
Penberthy circulating tank eductors, also known as in-tank mixers, may provide a low cost alternative over other mechanical methods. These units promote more thorough mixing action than either mechanical mixing or air sparging. The flow pattern is easily controlled and provides more complete integration of substances in a wide variety of viscosities and liquids. Penberthy in-tank mixers are inherently non- clogging, and with no moving parts require little or no maintenance. Slurries containing abrasive solids can wear out mechanical mixer blades, involving constant maintenance and process down time.
Pressure differential of inlet to tank pressure - 10-100 psig (70-690 kPag)
Mixing ratio : 3:1
Max. operating liquid viscosity: up to 2,000 cPs
216-360-9800
info@anderson-bolds.com
Click here for our CONTACT page.
