RAYMAX from Watlow

RAYMAX® 1220 and 2030 Panel Heaters from Anderson-Bolds

for a quote please email to watlow@anderson-bolds.com

or use our WATLOW form HERE!

 Ideal For Many Process Heating Applications Requiring “Hot Face” Temperatures

The Raymax Panel heater product line from Watlow solves virtually an application requiring radiant heat from a contamination resistant surfaces to fast responding high temperature needs.

Watlow Raymax Radient Panel

Maximum face temperature up to 2000ºF

Typical applications are:

Thermoforming

Food warming

Paint and epoxy curing

Heat treating

High temperature Furnaces

Tempering and annealing processes

Raymax 1010

1000ºF Face Temperature

The Ryamax 1010 is the ideal for use in screen printing, food warming and other low heat applications. The Heater's "sealed face" keeps contaminates away from the heating element, and the metal surface can be easily wiped or brushed clean whenever needed.

Uniform full surface heat source

Convenient ready to use package

One inch thick backside insulation

Repeatable temperature sensing options

UL: component listing.

Heater width is from 4-20 inches

Heater Length is from 10 to 68 inches

voltage up to 480 vac

Watt Density is 10W/sq. inch

 Easy to install and capable of high surface temperatures,

the RAYMAX® 1220 and 2030 are ideal for many process

heating applications requiring “hot-face” temperatures

above 1000°F (540°C).

Each ceramic fiber heater is mounted in a 21⁄2 in. (64 mm)

deep sheet metal case providing thermal insulation. The case

includes post terminals for electrical connections and

provides a mounting system that can be used with virtually

any flat ceramic fiber unit. Watt density and temperature

capabilities can be tailored to meet a specific radiant

application for exposed sinuated embedded coil or foil

element configuration.

Performance Capabilities

• RAYMAX 2030 (uses sinuated or coil elements):temperatures up to 2000°F (1095°C); watt densitiesup to 30 W/in2 (4.7 W/cm2)

• RAYMAX 1220 (uses an etched foil element):temperatures up to 1200°F (650°C); watt densitiesup to 20 W/in2 (3 W/cm2)

• Maximum voltage up to 600V

Features and Benefits

Lightweight, low mass design

• Allows fast response to controllers

Self insulation with 21/2 in. (64 mm ) thick mounting case

• Provides high efficiency

Thermocouple mounting clamp

• Simplifies process system control

Aluminized steel case

• Handles temperatures up to 1100°F (595°C)

Special hot-face heating patterns

• Designed specifically for an application using an etched foil RAYMAX 1220

Specifications 

Weight: Less than 6.5 lbs/ft2 (31.75 kg/m2) 

Voltage and Wattage: Ratings, up to 600VAC are based on 

the ceramic fiber heater module mounted in the case. 

Terminals: Terminals are 1⁄4-20 threaded studs. Two terminals 

plus ground for single-phase, and three terminals plus ground 

for 3-phase are located on the center length line unless 

otherwise specified. Terminals can be positioned anywhere 

along lines A and B (see illustration below), but not closer 

than 2 in. (51 mm) to the case ends. 

Mounting Legs: Mounting legs are available either 

1 in. (25 mm) or 3 in. (76 mm) length. For made-to-order units, 

mounting legs can be supplied in any incremental length L 

from 1⁄2 in. (13 mm) to 3 in. (76 mm). Slots are not provided in 

legs less than 1 in. (25 mm) long. 

Application Hints 

A thermocouple mounting clamp is attached to one end of 

the case, with holes on both ends for alternate locations. 

The clamp can be used with 1⁄8 in. (3.2 mm) O.D. sheath 

thermocouples. The clamp is 3/16 in. (4.8 mm) high, but 

can be removed for flush mounting*. 

The maximum recommended surface temperature of the 

heater is based on the rating of the ceramic fiber heater 

module. This can vary from 2000°F (1095°C) at lower watt 

densities, to higher watt densities at reduced surface 

temperatures. Note: maximum wattages cannot be achieved 

at the maximum temperatures simultaneously. 

* 13⁄16 in. (4.8 mm) and 1⁄4 in. (6 mm) are available upon request. 

Options 

Several options are available with RAYMAX 1220 and 2030 

models. Contact your Watlow representative for more 

information. 

• Single-phase non-standard location power terminals 

• Terminal box 

• Zoning 

• Mounting studs and legs 

• 3-phase construction 

• Thermocouple mounting tubes 

• Alternate case materials 

RAYMAX 2030 PART NUMBERS

VP504A06T, VP504A12T, VP504A18T, VP504A24T, VP504A30T, VP504A36T

VP506A06T, VP506A12T, VP506A18T, VP506A24T, VP506A30T, VP506A36T

VP508A06T, VP508A12T, VP508A18T, VP508A24T, VP508A30T, VP508A36T

VP510A06T, VP510A12T, VP510A18T, VP510A24T, VP510A30T, VP510A36T

VP510A06T, VP510A12T, VP510A18T, VP510A24T, VP510A30T, VP510A36T

VP512A06T, VP512A12T, VP512A18T, VP512A24T, VP512A30T, VP512A36T

VP514A06T, VP514A12T, VP514A18T, VP514A24T, VP514A30T, VP514A36T

VP516A06T, VP516A12T, VP516A18T, VP516A24T, VP516A30T, VP516A36T

Anderson-Bolds

216-360-9800

www.anderson-bolds.com

ATC 407C Multi Range Timer (TDR)

Anderson-Bolds Stocks the ATC 407C Time Delay Relay.

ATC is Automatic Timing and Controls (Marshbellowfram)

Model 407C 1/16 DIN Multimode Timer w/Octal Pins

On Delay, Off Delay and Interval Timing Modes.

ATC 407C500 Timer/Time Delay Relay

• 1/6 DIN multimode timer
• Selectable On-Delay/Off-Delay/Interval Timing Modes
• Separate Start Input
• Output Contacts rated 10A at 120/240 VAC and 30 VDC
• Six Timing Ranges in a single unit:
  1 and 10 sec., min., and hours
  5 and 50 sec., min., and hours
• Universal Power Supply; 24-240 VAC and 24 VDC
• 48mm2 DIN Standard housing
• Large and easy to read dial shows decimal points
• Round (octal) socket mount or mount in panel cutout
• Watertight when panel mounted
• Range and Mode select are tamper proof when panel mounted
• Unique flashing cycle progress indication

CE listing and UL recognized

ATC 407C100F3X 1/16 DIN ANALOG SET TDR, Multi-Mode TDR

1 and 10 seconds, 1 and 10 minutes, 1 and 10 and hours  =  6 ranges

BUY HERE

ATC 407C500F3X 1/16 DIN ANALOG SET TDR, Multi-Mode

5 and 50 seconds, 5 and 50 minutes, 5 and 50 and hours  =  6 ranges

BUY HERE

Buy Octal (8 pin) socket for 407C timer HERE

Anderson-Bolds

216-360-9800

sales@anderson-bolds.com

www.anderson-bolds.com

Verbatim A19 LED Retrofit Light Bulbs

Verbatim A19 LED Retrofit Light Bulbs from Anderson-Bolds

The Verbatim 3000K omni-directional A19 98065 LED bulb is designed for standard 60W incandescent lamp retrofits. This lamp emits omni-directional light, so it can be used in environments where downward light output is required, like table and floor lamps. The 3000K warm white color temperature allows these bulbs to be used in a wide variety of residential and commercial applications. Verbatim omni-directional A-type bulbs can reduce energy consumption by more than 80% when compared to incandescent bulbs. These bulbs have an estimated lifetime of 40,000 hours, resulting in additional savings in maintenance and replacement costs. This Verbatim LED bulb is fully dimmable and backed by Verbatim’s 5-year limited warranty.

60 watt replacement LED Bulb.  The 60 watt bulb is the most common bulb used.

Features:

• ENERGY STAR certified LED lamp
• Omni-directional light, ideal for A19 incandescent retrofits
• 60W incandescent replacement
• 3000K warm white light for residential and commercial environments
• Reduces energy consumption by over 80% when compared to a 60W incandescent bulb
• Compatible with most commercial dimmers, offering 10%-100% dimming performance.
• 40,000 hour lifetime reduces replacement and maintenance costs
• Environmentally-friendly product has no mercury or other hazardous materials and is RoHS compliant and UL listed.
• 5-year limited warranty

800 Lumens ~ 3000K color ~ ENERGY STAR ~ 12 watts ~ 40000 hours ~ 120 volts ~ E 26 base

Height 4.4 inches,   Diameter 2.4 inches, 320 degree light angle

VERBATIM MODEL 98065  ~  VERBATIM PART NUMBER  A19-L800-C30-O

www.anderson-bolds.com

LED History and Construction

The LED (Light Emitting Diode) was first discovered almost a century ago. In the early 1960’s the first practical devices were developed in the US. These were red LEDs used for indicators and alphanumeric displays. Since then blue, green and violet light emitting LEDs have been developed and research has concentrated on achieving lower costs with higher light output and efficiency.

In order to create the white light needed for general lighting the LEDs are surrounded by phosphor materials that transform the monochromatic light from a blue or near-UV LED to broad-spectrum white light. The development and sale of LED substrates, phosphors and encapsulants are a key focus for MCHC.

LED bulbs and lighting fixtures combine the methods and materials described above, electrical circuits to drive the LEDs, an optical lens to extract and focus the light, and heat sinks to maintain the LED’s optimum operating temperature.

Retrofit light bulbs are now available to replace most incandescent and CFL bulbs. The efficiency of an LED bulb is approximately five times that of a standard incandescent bulb, so that even though the initial cost of an LED lamp is higher than the incandescent type the additional cost is more than recovered through the lower energy usage and much longer life of the LED bulb. LED lamps are also environmentally friendly because they lessen the need for power generation and do not contain hazardous materials such as mercury.

Lighting in homes and businesses typically accounts for about 20% of electrical energy use. Conversion of incandescent lighting to LED-based lighting can have a major impact on national energy usage and individual carbon footprints.

866-360-9810

Danfoss Heating Mats - LX indoor Heating

Anderson-Bolds is a representative for Danfoss Electric Heating Mats in the Ohio, W. PA and KY areas.

Danfoss provides heating mats and cables (LX) for residential homes and commercial indoor spaces, (GX) sidewalks, driveways and loading docks for snow melting and (RX) cables for pipe tracing and roof and gutter ice protection.

The Danfoss LX mats (and cables) are for under floor heating, especially for bathrooms, kitchens and vestibule areas in a home.

Danfoss LX Electric Floor Heating System (Self-Adhesive Mat & Thermostat) is an affordable luxury that brings warmth to life. It's a proven technology that is safe, reliable, and energy efficient. The unique adhesive system saves 70% on installation time!

• Pre-applied heating cable means even heat every time
• Dual-adhesive backing, no fastening required
• Single point connection
• Twin conductor cable
• Eliminates EMF’s (electromagnetic fields)
• Customize mat on the job site
• Minimal thickness-only adds 3/16” height to the floor
• Safety approved for wet locations
• Even heat every time
• No fastening required
• Genuine ten year non-prorated warranty, includes labor and materials

Danfoss LX Floor Heating Cable (not mats) Systems combine the highest comfort levels with maximum energy efficiency.

• Single point connection
• Twin conductor cable
• Eliminates EMF’s (electromagnetic fields)
• Safety approved for wet locations
• Flexible installation
• Durable construction
• Genuine ten year non-prorated warranty, includes labor and materials.

Danfoss Reflect Insulation Plates are a revolutionary designed product that eliminates the need for a top coat on floating floors. When combined with Danfoss LX heating cables, Reflect provides the perfect solution for quick and easy installation of electric floor heating under engineered wood or laminate floors. The combination of an insulating subfloor and a heat-conducting surface ensures optimum heat is delivered up through the floor. Not used with mats, only cable.

• Best solution available for heating under laminate and engineered wood flooring
• Save time, no mixing of thin set or mud required
• Reflective plates heat quickly and evenly for maximum comfort
• High R-value insulation helps to reduce energy consumption
• Ideal for concrete floors and basement renovations


Both the cable and mats come in 120 or 240 volts. Never cut the RED wire.

The Danfoss LX Thermostat raises the bar for aesthetic appeal while offering industry-leading functionality. The LX electronic thermostat offers optimum comfort and numerous user-friendly features:

• Large backlit display for easy programming
• Includes Class-A GFCI for safety (approved for wet locations)
• Simple to program with intuitive on-screen menus
• Monitor energy consumption
• Dual voltage capability (can operate at either 120V or 240V)
• Four event, seven day ENERGY SAVINGS programming
• Easily upgrade older model LX thermostats

088L5130 Thermostat is the standard Thermostat for under floor sensing.  It has a built in GFCI and unique programming.  When you set the time for the thermostat to come, it is actually the time the floor will be ready (warm).  the thermostat will learn the heat up time and have the floor warm when you want it warm.  No need to adjust through out the year.
LX Programmable Thermostat with Floor Sensor
40°F to 104°F (5°C to +40°C)
32°F to 104°F (0°C to +40°C)
Class A (5mA trip level) GFCI
120V-240V max., 50/60Hz
15A max load
1800W at 120VAC, 3600W at 240VAC  max power
UL  Listed

The new LX Series Power Module makes it easy to connect more heating mats or cables to the same thermostat without the need for contactor panels. Allows additional mats to be added to a single thermostat or control point.

- An easy control solution for large areas
- Receives on/off command from the main thermostat
- Each Power Module adds 15A switching capability
- Can add up to five PM's to any thermostat
- Includes GFCI protection
- For use with programmable LX thermostats only

The Danfoss Little Buzzer continuity tester is a great tool to take advantage of while installing the LX mats or cables. The Little Buzzer is designed to monitor the mats or cables during installation process and sounds an alarm if the heating elements are cut or damaged. This allows for easy repair before the floor coverings are laid. The device is battery powered.


Please contact Anderson-Bolds for all your heating needs:
Industrial
Commercial
Residential
And we can help get you to the right product.

Use our feedback form or call at 216-360-9800.

Electric Floor Heating and Snow Melting for Homeowners

Danfoss LX Electric Floor Heating is an affordable luxury that brings warmth to life. Underfloor warming is a proven technology that’s safe, reliable and energy efficient. Our electric floor heating systems were designed with the installer in mind: pre-applied heating cable, single point connection, self-adhesive backing, quick installation, genuine 10-year warranty.

Danfoss GX Electric Snow Melting provides a permanent solution to the problems caused by cold weather.  It improves safety by providing instant relief from snow and ice and increase your bottom line by reducing the cost associated with applying chemicals, or hiring an outside service.  The system is designed for a wide variety of surface materials including concrete, asphalt, and paving stones.