Q'Mark Commercial Baseboard - QMKC

QMKC SERIES ~ Electric Commercial Baseboard by Q'Mark and Anderson-Bolds

Commercial grade construction: 18-gauge front and cover brackets allow heater to withstand rigors of commercial applications. 

Easy installation: Can be installed with minimal disassembly, using mounting holes in rear of cabinet 

Built-in wireway: Facilitates end-to-end installation of continuous-run heaters 

Efficient heat dissipation: "Chimney fin" type element designed for maximum air circulation. Air flow is directed away from walls 

Steel sheathed element: Heating element design combines the durability of a steel tubular heater with the excellent heat transfer characteristics of aluminum fins 

Roomy junction box: Large, identical, pre-wired junction boxes at each end are provided with knockouts in the rear, bottom, inside and outside junction box walls 

Navajo White or Northern White durable textured polyester powder coat finish 

QMKC25126W  2.5 feet  120 volts  500 watts

QMKC25026W  2.5 feet  208 volts  500 watts

QMKC25426W  2.5 feet  240/208 volts  500/376 watts

QMKC25726W  2.5 feet  277/240/208 volts  500/375/282 watts

QMKC2513W    3.0 feet   120 volts  750 watts

QMKC2503W    3.0 feet   208 volts  750 wtts

QMKC2543W    3.0 feet  240/208 volts  750/564 watts

QMKC2573W    3.0 feet  277/240/208 volts  750/564/423 watts

QMKC2514W    4.0 feet  120 volts  1000 watts

QMKC2504W    4.0 feet  208 volts  1000 watts

QMKC2544W    4.0 feet  240/208 volts  1000/752 watts

QMKC2574W    4.0 feet  277/240/208 volts  1000/752/564 watts

QMKC2515W    5.0 feet  120 volts  1250 watts 

QMKC2505W    5.0 feet   208 volts 1250 watts

QMKC2545W    5.0 feet   240/208 volts   1250/940 watts

QMKC2575W    5.0 feet   277/240/208 volts  1250/940/705 watts

QMKC2516W    6.0 feet  120 volts   1500 watts

QMKC2506W    6.0 feet  208 volts   1500 watts

QMKC2546W    6.0 feet  240/208 volts  1500/1128 watts

QMKC2576W    6.0 feet  277/240/208 volts  1500/1128/846 watts

QMKC2508W    8.0 feet  208 volts   2000 watts

QMKC2548W    8.0 feet  240/208 volts   2000/1504 watts

QMKC2578W    8.0 feet  277/240/208 volts  2000/1504/1128 watts

QMKC25008W  12.0 feet  208 volts   2500 watts

QMKC25408W  12.0 feet  240/208 volts  2500/1880

QMKC25708W  12.0 feet  277/240 volts  2500/1880/1410

QMK CBDA2W   2'6" Blank Section

QMK CBDA3W    3' Blank Section

QMK CBDA4W    4' Blank Section

QMK CBDA5W    5' Blank Section

QMK CBDA6W    6' Blank Section

QMK CBDA8W    8' Blank Section

QMK ICAW Inside corner

FS12  1 foot filler section

FS24  2 foot filler section

FS36  3 foot filler section

FS48  4 foot filler section

FSJ2  2 inch Joiner Strip

TA1AW  SINGLE POLE THERMOSTAT, 22 amps

TA1TPAW  Tamper Resistant Single Pole Thermostat

TA2AW  DOUBLE POLE THERMOSTAT, 22 amps

TA2TPAW Tamper Resistant Double Pole Thermostat

HCA121520W 120 volt Load Transfer Switch

HCA241520W 240 volt Load Transfer Switch

RA1W  120 volt DuPlex receptacle

RA1COMPW  Duplex Receptacle cover

DSW2W   Double Pole Disconnect Switch 

PR24  Single Pole Power Relay, 24volt control, 30 amps

PR120  Single Pole Power Relay, 120 volt control, 30 amps

RSA1224  120/24V TRANSFORMER RELAY - 25A

RSA2024  208/24V TRANSFORMER RELAY - 25A

RSA2424  240/24V TRANSFORMER RELAY - 25A

RSA2724  277/24V TRANSFORMER RELAY - 25A

Navajo White or Northern White durable textured

polyester powder coat finish for corrosion resistance. Linear

thermal cut-out shall be factory installed to automatically shut

off heater in event of overheating and reactivate heater when

temperatures return to normal. Raceway cover kit for

providing an enclosed raceway is standard. The complete

heater shall have a height of 6-3/4 (171.5) inches and a

depth of 2-7/8 (73.2) inches. Heaters shall have cULus

approval for mounting on any floor surface including

carpeting.

Heating Element: The heating element wire shall consist

of 80% nickel, 20% chromium, and shall be encased in steel

sheath to assure long and trouble free life. Aluminum fins

shall be so designed as to block sheath radiation to front and

back of heater body and pressure bonded to steel sheath.

Enclosure: The heaters shall be fabricated of minimum

.024 in. steel with minimum .040 in. steel control boxes.

Support brackets shall be .035 in. steel. Junction box

enclosure to have provisions for incoming and outgoing cable

with cable clamp for restraining without additional hardware.

Ground wire pigtail provided in each junction box for

grounding.

email us at qmark@anderson-bolds.com

or call 216-360-9800

Q'Mark on Anderson-Bolds

Q'Mark MUH Electric Unit Heater

Q'Mark MUH (Modular Unit Heater) by Marley

The Q'Mark Space Mod Unit Heater can be found just about anywhere heating enclosed spaces to keep people warm or for freeze protection.  The heaters are easy to mount on a wall or the ceiling. Ratings are from 3 kw to 50 kw in all the standard voltages.  Used in Warehouses, Garages, Sheds, Exposition Centers, Rest Rooms, Rest Stops, Factories, Tents and Trucks to name a few.

Anderson-Bolds has provided Electric Unit Heaters to the Ohio and Kentucky marketplace for over 70 years!

MUH - Auxiliary, supplementary or primary heat source in factories, stores, garages, basements, warehouses, public buildings, service stations, stock-rooms, offices, large or exposed areas.

•    Unit mounts either horizontally or vertically. Totally versatile. For factories, warehouses, garages, stores, shipping rooms, power stations, aircraft hangers, etc. Can be used for primary, supplemental, spot or dual-system heating.

•    Wide range of optional control kits are field installable, increasing the MUH adaptability to the specification market.

•    Forced air unit heater with 10 power ratings; from 3kW to 50kW heating output; 208, 240, 277 and 480V; 10,230 to 170,500 BTU/hr.

•    32 compatible models (no need to try to assemble a heating system from 70 or 80 models).

•    Heavy gauge die-formed steel housing. Two-toned smartly styled.

•    Advanced pull-through air flow design draws air across heating element for more even air distribution and cooler element operation.

•    Specially designed venturi outlet to meet that added throw as required in vertical position.

•    Branch circuit fusing (when required).

•    1 or 3-phase wiring on 5 through 10kW 208/240V and 15kW 208V units (field interchangeable).

•    24V control transformer standard on most models, providing a safer and more accurate means of temperature control. 3kW and 5kW 208-277V, have line voltage controls as standard (24V control available on made-to-order basis).

•    Automatic reset linear thermal cut-out, capillary type, provides protection over entire length of element areas (Manual reset protection available on made-to-order basis).

•    2-speed fan selector switch (25 to 50kW models).

•    Fan delay feature eliminates cold drafts. Element heats up before fan cuts in, then fan continues to distribute heat after element shuts off.

• Individually adjustable discharge louvers to control air flow.

• Meets all UL, NEC, and OSHA requirements.

Unit heaters should not be used in potentially explosive atmospheres. The finish is not intended for direct salt spray exposure in marine applications or the highly corrosive atmospheres of swimming pools, chemical storage bins, etc. Do not install unit heaters above recommended maximum mounting height. Obstructions must not block unit heater air inlet or discharge. Heaters must be mounted at least 7’ above the floor to prevent accidental contact with the heating element or fan blade which could cause injury.

Mounting Accessories:

Universal Wall and Ceiling Bracket

MMB-10   MUH-03, 05, 07 & 10

MMB-20   MUH-15 and MUH-20

MMB-30   MUH-25 and MUH-30

MMB-50   MUH-40 and MUH-50

Ceiling Bracket

MCMB-10   MUH-03, 05, 07 &  MUH-10

MCMB-20   MUH-15 and MUH-20

MCMB-30   MUH-25 and MUH-30

MCMB-50   MUH-40 and MUH-50

Electrical ACCESSORIES:

MT-1  Single Pole Internal Thermostat Temp. Range: 40°F - 85°F

MT-2  Two Stage Internal Thermostat Temp. Range: 40°F - 85°F

MCFS  Internal Summer Fan Switch

MRFS-1   Remote Summer Fan Switch (Line Voltage)

NRfS-2  Remote Summer Fan Switch with Relay (24V Coil-Single Pole Normally Open)

MHRT  Heater Recovery Thermostat with Relay (24V Coil-Single Pole Normally Open) Hi — 120°F; Low — 60°F

MPDS-25  Power Disconnect Switch (3 Pole)

MPDS-60  Power Disconnect Switch (3 Pole)

Anderson-Bolds is the Q'Mark Representative in Ohio and Kentucky.
Contact us with our Application Form or call 216-360-9800