Temperature Controls - Mechanical

Fenwal controls and Barksdale manufacture mechanical temperature control devices. The switches are bi-metal or liquid filled switches that use expansion and contraction to cause the switching. This type of mechanism can be extremely accurate but lacks in displaying the temperature. In todays computerized/automated world this type of control tends to be used for over temperature control or alarm as opposed to the process control point.

Barksdale manufactures liquid filled switches, both for Hazardous areas and normal areas. The switches can be either local or remote mount. They can sense temperatures up to 600 degrees F.

Local mount type temperature switches are installed in the pipe or vessel. In this type of sensor, the filling fluid surrounds the bellows. A negative temperature change forces the fluid to contract - expanding the bellows to actuate the switch.

Remote bulb and capillary type temperature switches allow the switch enclosure to be placed up to 25 feet from the media. These models use a bulb and capillary sensing device which may be ordered in standard six and 12 foot lengths. Extra lengths up to 25 feet are available. Six and 12 foot sensors can be copper or stainless steel with or without protective spiral-wound armor. The 25 foot lengths are armored stainless steel only.

Barksdale's MT1H & T2H Series Temperature Switches provide unmatched performance, quality & reliability in a mechanical thermostat. The single set point MT1H and dual set point T2H, can switch, measure & control temperatures from -50° to 650°F (-45° to 343°C), The optional adjustable differential provides precise control while ambient compensation maintains 1/2% accuracy with external temperatures from -65° to 165°F. The MT1H & T2H Series are electrically rated for 10 amps @ 125/250 VAC & 3 amps @ 480 VAC. Standard 3- & 6-pin terminal strips simplify installation. The MT1H & T2H Series are rated NEMA 4 & 13; the optional NEMA 4X construction protects the rugged die-cast aluminum enclosure from corrosive environments. A remote bulb and capillary sensor is available in copper or stainless steel allowing the switch to be mounted up to 25 feet from the temperature source. Optional thermowells allow the sensor to work in pressurized vessels to 5000 psi. UL listed & CSA approved, MT1H & T2H Series Temperature Switches are perfect for your temperature sensing needs.

Barksdale's L1X, T1X & T2X Series Temperature Switches provide unmatched performance, quality & reliability in a mechanical thermostat - a safe solution for hazardous locations. The single set point L1X & T1X and dual set point T2X, can switch, measure & control temperatures from 50° to 650°F (-45° to 343°C), and meets Class 1, Div. 1 & 2 hazardous location requirements. The optional adjustable differential provides precise control. These switches can be mounted locally for control directly at the source or remotely up to 25 feet. The L1X, T1X & T2X Series are electrically rated for 10 amps @ 125/250 VAC & 3 amps @ 480 VAC. Standard 3 & 6 pin terminal strips simplify installation. The L1X, T1X & T2X Series are rated NEMA 4, 7 & 9 and incorporate stainless steel temperature sensors to handle a wide range of media. Optional thermowells allow the sensor to work in pressurized vessels to 5000 psi. The L1X, T1X & T2X Series are UL listed & CSA approved & ATEX Certified for hazardous zones within the European Community.

Barksdale's ML1H & L2H Series Temperature Switches provide unmatched performance, quality & reliability in a mechanical thermostat. The single set point ML1H and dual set point L2H, can switch, measure & control temperatures from -50° to 450°F (-45° to 232°C), while the optional adjustable differential provides precise control. These locally mounted switches provide fast response and accurate measurements at the temperature source. Both the ML1H & L2H Series are electrically rated for 10 amps @ 125/250 VAC & 3 amps @ 480 VAC. Standard 3- & 6-pin terminal strips simplify installation. The ML1H & L2H Series are rated NEMA 4 & 13; the optional NEMA 4X construction protects the rugged die-cast aluminum enclosure from corrosive environments. Copper or stainless steel temperature sensors are available to handle a wide range of media. Optional thermowells allow the sensor to work in pressurized vessels to 5000 psi. UL listed & CSA approved, ML1H & L2H Series Temperature Switches are perfect for your temperature sensing needs.

The FENWAL THERMOSWITCH was invented in the 1930's to control fish tanks, irons and other simple applications, but it was soon realied that they could be used for industrial, commercial and process applications. They're durability, reliability and accuracy are the strong points for THERMOSWITCHES.

THERMOSWITCH® Temperature Controllers are tubular devices featuring an outer shell made of high-expanding metal and internal struts made of low-expanding metal, with a pair of electrical contacts between them.

When the temperature of the media being measured changes, a corresponding change in the spacing of the contacts provides instant on/of

f control with a small differential, resulting in +1°F precision, depending upon the application.

Series 17000, 18000

PROBE TYPE, SPDT

Series Features:

Fast Response - outer shell is the active sensing member

Precise Control - substantially reduces overshoot & undershoot

Extreme Sensitivity - slow make and break contacts, resolution 0.1°F (0.05°C)

Vibration Resistance - best possible control under difficult physical conditions

Cost-effective, Compact, Simple-In-Operation

Numerous Mounting Configurations

Specifications:

Overlapping ranges from -100°F to 600°F (-73° to 316°C)

1200 Watt resistive load at 120/240 VAC

5/8" diameter THERMOSWITCH® models available

Agency Approvals:

UL and CSA

Applications:

Food service equipment

Packaging equipment

Laminating presses

Agricultural equipment

Fenwal's snap action liquid filled THERMOSWITCH® controllers, the expandable liquid surrounding the bellows is in direct contact with the temperature sensing outer shell providing a fast response for accurate temp- erature sensing.

Series 20000, 21000, 22000 - OBSOLETE

PROBE TYPE, SPST

Series Features:

Individually field adjustable micro-switches

One or two micro-switches

Specifications:

Overlapping ranges from 0° to 300°F (-18° to 148°C)

Ratings to 15 A at 120/250 VAC

Factory preset temperatures available

NEMA 4 enclosure available

Agency Approvals:

UL, CSA

Applications:

Food service equipment

Medical vaporizers

Commercial dishwashers

Based on the differential expansion of metals principle, an increase in temperature causes the stainless steel outer case of the Surface Mounting THERMOSWITCH® controller to expand at a greater rate than the internal bridge assembly.

Because the case is in direct contact with the heated surface, a temperature change is sensed almost instantaneously.

Call for availability, most of the part numbers are obsolete as of July 2012.

Series 30000

SURFACE MOUNT TYPE, SPST

Click below to buy.

30000-0, 30000-48, 30002-0  

Series Features:

Fully adjustable

Narrow temperature differential

Compact size

Economical

Factory preset temperatures

NEMA 4 enclosure

Specifications:

Overlapping ranges from 50° to 600°F (10° to 315°C)

1200 Watt resistive load at 120/240 VAC

Minimum contact rating of 100,000 cycle

Options:

Cross mounting bracket

Slotted and extended adjusting screw lengths

Factory preset temperature

Special range calibration

Agency Approvals:

UL

Applications:

Plastic laminating presses

Food warming trays

Popcorn machines

Domestic appliances

Industrial steam cleaners

Anderson-Bolds can supply all of your temperature control needs.

IMS Electric Meters, Integrated Metering Systems

Integrated Metering Systems, Inexpensive Electric Meters

IMS - Integrated Metering Systems

Since 1989 IMS has been manufacturing current transformer (CT) rated electric submeters. These products quantify electrical energy for dozens of applications, including tenant billing, energy management, solar PV production, cost accounting, or any other application where an accurate, easy-to-install electric meter is required.

Unlike most electric utility meters, our revenue grade CT-rated meters do not plug into a meter socket, so there is no need to re-route power wires. No other electronic meter manufacturer has the confidence and experience to offer a ten-year warranty, and our unique and diverse array of product offerings cover almost any residential, commercial, or industrial application. Our commitment is to 100% customer satisfaction!

Mini Meters

Designed for residential applications, these 100A, 200A, and 400A electric submeters are perfect for metering electric consumption or production for nearly any 120V 2-wire or 120/240V 3-wire application. These revenue-grade single phase (120V 2-wire or 120/240V 3-wire) kWh meters make tenant submetering a snap! Available in indoor flush-mount, outdoor surface-mount, or NEMA 4X Multiple Meter Units (MMUs). Also available in UL Listed, NEMA 4X Multiple Meter Units (MMUs), with up to nineteen meters per enclosure.

Key Features

• Small size
• Utility (revenue) grade solid core or easy-to-install split core Current Transformers (CTs)
• Authorized to apply the UL Mark
• Approved by Maryland Public Service Commission
• Approved by California Division of Measurement Standards
• Approved 2% meter under the California Solar Initiative's PBI program
• Ten-year warranty

1000 Series

This kWh meter with optional demand function has a large LCD display, pulse outputs, and an RS485 serial port for remote monitoring. Available in an indoor steel or outdoor NEMA 4X enclosure (see links at left), which both are UL Listed.

Models in this series come in the following voltage ratings and configurations:

• 1 Ph, 2-Wire, 120V
• 1 Ph, 3-Wire, 120/240V or 2 PH, 3-Wire, 120/208V (same model works with either configuration)
• 1 Ph, 2-Wire, 277V
• 2 Ph, 3-Wire, 277/480V

Key Features

• Large LCD Display showing kWh and (optionally) instantaneous and peak demand with manual keyed reset
• Utility (revenue) grade solid core or easy-to-install split core Current Transformers (CTs)
• Reverse energy LED indicator helps ensure proper installation
• UL Listed
• Approved by Maryland Public Service Commission
• Same low price for indoor steel or outdoor NEMA 4X non-metallic enclosure
• Approved 2% meter under the California Solar Initiative's PBI program
• Ten-year warranty

2000 Series

Designed for industrial and commercial applications, this UL Listed Three Phase 4-wire revenue grade kilowatt-hour Demand meter is an excellent low-cost option. It features a large LCD display, pulse outputs, an RS-485 serial port, and a ten-year warranty. Same low price for either indoor steel or outdoor NEMA-4X enclosure!

Key Features

• Large LCD Display showing kWh and (optionally) instantaneous and peak demand with manual keyed reset
• Utility (revenue) grade solid core or easy-to-install split core Current Transformers (CTs)
• Reverse energy LED indicator helps ensure proper installation
• UL Listed
• Approved by Maryland Public Service Commission
• Same low price for indoor steel or outdoor NEMA 4X non-metallic enclosure
• Approved 2% meter under the California Solar Initiative's PBI program
• Ten-year warranty

3000 Series Multi-Function Smart Meter

(UL Listing Pending. Available Winter 2010)

The IMS 3000 Series Smart Meter line offers more features and functionality than anything ever manufactured by IMS. Incorporating the latest technology and our decades of energy meter design and manufacturing experience, these products will be suitable for a number of energy monitoring, management, and billing applications, all at a remarkably low introductory price. As always, these products come with the IMS ten-year warranty.

Standard Features, All Models

• kWh, maximum demand, and instantaneous power on LCD display and over Modbus serial port
• Same meter for 3PH 3W Delta or 3PH 4W Y configurations, 208V or 480V
• Revenue-grade accuracy with solid-core CTs, or easy to install split core CTs
• Wide operating range with automatic temperature compensation for maximum accuracy (0.5% error max under all conditions with IMS solid core CTs)
• Large custom LCD display with scroll button
• 12VDC mechanical counter output
• Auxiliary 12VDC output @ 200mA for powering wireless AMR devices
• Two isolated pulse outputs (kWh & 10wh)
• Low voltage detection
• Reverse energy indicators (per phase) on display to ensure correct meter installation

Standard Features on Modbus Serial Port

• kWh, Max. Demand (kW), Frequency (Hz)
• Volts, Amps, Watts, VA, and PF per phase
• Time of Use Metering: Built-in data logger stores kWh, Volts, Amps, and Watts, with date & time stamp from real time clock (65 days of data storage @ 15 minute intervals)

Optional Features

• Volts, Amps, Watts, VA, and PF per phase on display
• Bidirectional Metering (kWh; bidirectional Demand upon request)
• BACnet interface
• Ethernet interface (IP addressable)
• Battery backup for real time clock

Current Transformers

Split Core vs. Solid

Should I order split core or solid core CT's? What's the difference?

Solid Core

Solid core Current Transformers (CTs) look like donuts with wires attached. These ring-shaped devices slip over the power lines and measure the electrical current flowing through the line. The CT "secondary" wires connect to the meter, facilitating power and energy calculations.

Solid core CTs are very accurate (0.3% maximum error), small in size, and inexpensive. However, power must be turned off and the circuit opened, generally at a circuit breaker, so that the solid core CT can be slipped over the power line. After installation the power wire must be reconnected to close the electrical circuit. Installation usually only takes a minute or two per CT.

Split Core

Split core CTs can be taken apart, or ‘split' into halves, which negates the need to turn power off and open the circuit during installation. This saves a little installation time, and for critical loads that cannot be switched off, split core CTs are a must. However, split core CTs are more expensive, bulkier, and not as accurate as solid core CTs.

www.anderson-bolds.com

216-360-9800

Solid State Contactors ~ Gavazzi

CARLO GAVAZZI
A u t o m a t i o n C o m p o n e n t s
Announces new Solid State Contactors and reversing contactors.


Carlo Gavazzi has announced the launch of the REC Series of 3-phase Solid State Contactors and Reversing Contactors. The REC Series is twenty times more durable than equivalent mechanical contactors and succeeds in handling high frequency switching. The REC Series is comprised of a 3-pole non-reversing version with three switched phases or a 3-pole non-reversing and reversing versions with two switched phases. The first solution eliminates direct connection from the power supply to motor, while the second one maintains the same performance level while providing relevant cost reduction. The REC is mechanically compatible with Carlo Gavazzi’s CGT-22 line of bimetallic overload modules, by means of a plastic adapter.
In addition to competitive pricing, the REC Series assures substantial savings, as it
reduces system downtime and maintenance costs. The solid state contactors are provided
with a 1,600 Vp blocking voltage option that enhances their surge current ratings.
The REC Series is cUL listed as a motor starter and complies with the NMFT/NMFT7
requirements. The main technical features include:


• REC2 / REC3 – direct starting of
3-phase motors up to 5Hp at 480VAC
• REC2R – direct starting and reversing of
3-phase motors up to 5Hp at 480VAC
• Full load rating at 40°C / 104°F
• Instant-on switching
• Rated operational voltage up to 600VAC
• AC or DC control options
• Mechanical contactor resemblance with
covered heat sink
• Connects to CGT-22 overload module
• Control status LED indication
• DIN-rail or panel mounting
• cULus listed, CE and RoHS compliant


REC is an electronic contactor intended to replace the traditional mechanical counterpart used to switch three phase motors. The range includes 2 and 3 phase switching versions up to 4kW and 600Vrms.
Options with high surge current and I²t for fusing purposes are also available. The relay switches instantaneously upon application of the control voltage to emulate mechanical relay operation. A covered heatsink resolves any issues with regards to cables running close to the heatsink and eliminates the need for protective earth cabling. The product can be mounted on DIN-rail or on a panel. Note:
Specifications stated at 25°C unless specified.


The solid state contactors are available from Carlo Gavazzi’s North American authorized stocking distributor Anderson-Bolds.

Watlow Temperature Controls ~ EZ-Zone

Watlow is standardizing on their EZ Zone controllers, the newest and very highly capable temperature / process controllers on the market. All the controllers share the same base chip/board so can talk to each other and are programmed in very similar fashion.

Watlow's temperature and process controllers offer easy-to-use, accurate and reliable solutions for applications requiring single and multiple loops of control.

Temperature and process controllers include one or more sensor inputs with open-loop break detection and multiple outputs for control and alarms. Various configurations offer auxiliary analog inputs, automatic tuning, TRU-TUNE^®+ adaptive control, and ramp and soak profiling. Output options include analog process, switched DC and mechanical, solid state and no-arc hybrid relays. Other features include countdown timer, user-customizable menu, burst fire output control, failed heater/load detection and NEMA 4X (IP65, IP66).

EZ-ZONE controllers offer additional features and options including application blocks with timers and counters, on-board data logging, SENSOR GUARD backup to protect loads should a sensor fail, AUTO CLONE™ automatic configuration backup and restore, standard bus communications, wide ambient-temperature operating range, Class I, div 2 rating, SD card expandable memory, USB connectivity and free configuration software.

The EZ-ZONE® PM panel mount controller from Watlow®
offers control options to reduce system complexity and the
cost of thermal loop ownership. You can order the EZ-ZONE
PM as a PID controller, an over/under limit controller or these
functions can be combined into an integrated controller. You
also have the option to integrate a high amperage power
controller output with a high-performance PID controller and
an over/under limit controller in one space-saving, panel
mount package. A number of communication options are
available to support your connectivity needs.
Because the EZ-ZONE PM controller is highly scalable, you
only pay for what you need. This controller is available in 1⁄32,
1⁄16, 1⁄8 and 1⁄4 DIN panel mount packages. If you are looking for
a PID controller, an over/under limit controller or an
integrated controller, the EZ-ZONE PM will make your
life easier.

The Watlow EZ-Zone PM express panel mount controller is an industry leading PID controller tht allows for optimal performance utilizing simple contol and menu functionalitywithout complex features. The EZ-Zone PM express is ideally suited for basic applications and usage levels.

The Watlow EZ-Zone PM express is the next generation of controllers leveraging the strong legacy of Watlow's Series 93, series 935 and series SD controllers where easy to use features are needed for basic applications. It includes one universal input and the option for up to two outputs and is available in 1/32 or 1/16 DIN panel mount packages.

The EZ-ZONE® RM controller family offers products that
simplify thermal system management. The EZ-ZONE RM
family is comprised of six module types: an integrated on
or off PID control, monitoring and over/under temperature
limit module, a high-density on or off PID control module,
a high-density limit only module, an input/output (I/O)
expansion module, a high-density monitor/scanner module
and a data logging and field communications access
module. A system is configured by connecting any
combination of module types to address specific application
needs. The EZ-ZONE RM is extremely flexible and scalable
allowing you to mix and match I/O to configure 1 to 152
control loops and up to 256 monitor points.



Please visit our Watlow Web site.

or call 216-360-9800