Anderson-Bolds is an Altech Products distributor.

Altech Corp. provides Automation and Control components and ATEX Rated products.

For a quote, please click HERE!

Aluminum and Polyester Enclosures
Cable Gland - ATEX Polyamide
Snap-action Switch
Position Switch series ENM2 and GC, Rope Pull Switch SD
Sensors
DIN Rail Terminal Blocks


Circuit Breaksers
Altech is a US leader in DIN rail mounted breakers with ratings up to 63A. Only Altech offers DIN rail mounted breakers that meet UL489, UL508 or UL1077 approvals with a short circuit interrupt capacity of up to 10kA. 
When you need branch circuit protection, Altech offers UL489 Miniature Molded Case Circuit Breakers in both AC and DC voltages. The AC version offers dual voltage rated circuit breakers at 0.2-63A/240VAC and 0.2-32A/480Y/277VAC in 1-3 poles. Altech is the only company that offers a 14kA, 20A C curve single phase breaker at 277V AC. The DC version offers 0.2-63A at 125V (1 pole) and 250V (2 pole).
If your application requires a manual motor controller, Altech is the leading US supplier of UL508 Manual Motor Controllers (MMC). In AC, we offer up to 60A in 1 to 3 poles at 480Y/277VAC. With 6 trip curves, Altech has the largest selection in the industry. This ensures you the selectivity you require for your application designs. Our MMCs have a 10kA short circuit withstand capacity, this is the highest rating in the industry. The AC version is rated up to 60A and is DC rated in 2 poles up to 80VDC.
When your application requires supplemental protection for control circuits and on the load side of branch circuit protectors Altech has solutions. We offer a competitive line of AC Supplementary Protectors, up to 63A, in 1 to 3 poles at 480Y/277VAC with a 10kA short circuit withstand rating.

ALTECH HAS THE MOST COMPLETE LINE OF UL GROUND FAULT EQUIPMENT PROTECTION PRODUCTS IN THE INDUSTRY.
The UL 489 Branch Circuit with Ground Fault Relay is the 1st in the industry! Since it includes a UL 489 Branch Circuit Protector, in many cases there is no need for upstream circuit protection. It comes in 1+N pole, 2 pole and 2 pole +N configurations at 240V AC, 120/240V AC. It has a rated current of 5 - 40A. It also has a Rated Short Circuit Interrupt Capacity of 10kA and comes in Overload tripping curves B, C and D. The Rated Frequency is 50/60Hz.

The UL 1053 approved device comes in 1 pole + N and 3 pole + N at 277V AC, 480Y/277V AC. It has a Rated Current of 25, 40 and 63A. It also has a Rated Short Circuit Withstand Capacity of 10kA and a Rated Frequency of 50/60Hz.

The GF Series of Equipment Ground Fault Protection Relays (Earth Leakage Protection) is providing ground fault (residual current) as well as pulsating DC ground fault protection for circuits with loads up to 63A.

The UL 1077/1053 device comes in 1 pole + N and 3 pole + N at 277V AC, 480Y/277V AC. Rated Current ranges from 5 - 40A. It also has a Rated Short Circuit Withstand Capacity of 10kA, and comes in Overload tripping curves B, C and D. The Rated Frequency is 50/60Hz.

The GFR Series is a combined Equipment Ground Fault Relay and Supplementary Protector (RCBO) is designed to provide protection against overloads and AC ground faults (residual current faults) as well as pulsating DC ground faults.

Power Distribution Blocks

• Speed of mounting and wiring
• IP20 Finger Safe
• DIN Rail or Panel Mount
• Blocks fit with other DIN Rail mountable modular devices (height 95mm, depth 44.5mm)
• Accessories increase the number of outputs with only one input

RCCB Earth Leakage Circuit Breakers

Compact DIN rail mount RCCB Earth Leakage Circuit Breakers detect and interrupt ground faults. They are VDE approved for the European system of protecting people, animals, equipment and property from dangerous line-to-ground and shock hazard currents.
US applications include ground fault protection of equipment (GFPE), especially when high distributed capacitance or other leakages cause excessive nuisance trips at lower fault currents.

• RCCB Four Pole, 2- or 3-Phase
• RCCB Two Pole, Single Phase
• Electrical Ratings:
  16-63A / 415Y/240V AC
• Trip Capable on Decayed Line Voltage
• Marked Approval of VDE
• Marked "Snowflake" Temperature Range (-25 to 40 °C [-13 to 104 °F])
• Marked Trip Sensitivity to Pulsed as well as Sinusoidal Fault Currents
• Integral Test Circuit
• Insensitive to Vibration, et

TR Series
UL1077 Recognized
Supplementary Protector/
Circuit Breaker for Equipment

Electrical Ratings: 0.5-16.0A / 240V AC, 50/60Hz, 32V DC / 24V DC (VDE)

Applications:
Protection of Control Transformers, UPS, Power strips, Solenoids etc., against damage due to
overload conditions.

Motor Disconnect Switches

• One of the smallest 80A switches in the industry
• Advanced switch technology (use of silver contacts ensures safe and durable operation)
• Across the line, motor starting - up to 75hp/600V
• General Use Rating - 16A to 150A/600V
• Available as rotary switches for extended or direct handle
• Toggle switches
• Non-fused switch
• Short Circuit withstand Ratings 10kA with back-up fuse
• DIN Rail and panel mount available
• Comprehensive range of accessories includes Door Mounting Kits & Fuse Holder
• Snap on auxiliary contacts
• Enclosed switches with UL 4, 4X Type 4x rating
• AC Motor Across-the-line
• AC General Use
• Horsepower Ratings
• DIN Rail Mount

Extended / Direct Handle Motor Disconnect SwitchThe KU/VKA...N series can be used with extended and direct handles.

• 3-4 poles
• General Purpose Current: 25A - 150A
• Maximum Voltage: 600V AC
• Motor FLA @ 480V AC: 17.5A - 34A
• Motor FLA @ 600V AC: 11A - 83A
• 1 Phase and 3 Phase Horsepower Rating
• Short Circuit withstand Rating at 600V with Max. Fuse
• Terminal Size Acceptability: 14-8AWG - 4-1/0AWG

Extended Handle Accessories

• Door Interlock Handles
• Door Interlock Shaft
• Auxiliary Switches
• Fuse Holder
• Direct Handles
• Door Mountng Kits
  DRILL TEMPLATES:
  LK10
  LK11
  OKA 0V LK2
  OKA KU LK10
• Mounting Alternatives - Aluminum DIN Rail

Polycarbonate Enclosed Motor Disconnect Switch
These enclosed switches can be used locally at the motor.

• Can be used locally at the motor
• UL Type 4X
• IEC IP65 Protection Level
• UV resistant
• Resistant to many chemicals
• Lockable - Defeatable Handle

Aluminum Enclosed Motor Disconnect Switch

These enclosed switches can be used locally at the motor.

• UL Type 4
• Excellent in harsh weather conditions
• UV resistant
• Resistant to many chemicals
• IP66 Protection Level
• Lockable and Defeatable Handle

Stainless Steel Enclosed Motor Disconnect Switch
These enclosed switches can be used locally at the motor.

• UL Type 4X
• Ideal where chemicals are used for cleaning and maintenance such as food processing and breweries
• Mining is another application area
• Stainless Steel (Grade AISI 316)
• Corrosion Resistant
• IP66 Protection Level
• Lockable - Defeatable Handle

For a quote, please click HERE!

Anderson-Bolds
216-360-9800
www.anderson-bolds.com

MDI 100 Amp 4 Pole Contactors

Anderson-Bolds carries 4 pole 100 AMP contractors from MDI

Buy All MDI Contactors HERE.

Mercury Displacement Industries (MDI) Relays are all designed and built to meet the most exacting demands of industry. They have won their high place in the electrical field by doing the tough and tricky jobs that ordinary equipment could at best do in an uncertain manner. They have proved their ability to stand up under the most adverse conditions of temperature, dust and moisture, in all types of applications.

MDI 4100NO Relays - Note Dimensions below

MDI Four Pole Contactors are 10-1/8 Inches wide, 5-5/32 inches high and 2-11/16 wide.

The 100-AMP normally open contactors are designed and manufactured to high quality specifications and the contactors are commonly used in various heating, lighting, and many other industrial applications including high voltage ultraviolet type loads. The contacts are encased in hermetically sealed stainless steel tubes to provide reliable switching for millions of operations. MDI has manufactured this contactor since 1975. It is available in the single, two, three & four pole models.

MDI 4 Pole 100 AMP Contactor Specifications

* CONTACT RESISTANCE .001 ohms
* DIELECTRIC WITHSTAND 2,500 VAC RMS * OPERATE TIME 50 MILLISECONDS
* RELEASE TIME 80 MILLISECONDS

* RATINGS:
CONTACTS: 80 AMP @ 480 VAC
100 AMP @ 240 VAC
RESISTIVE COIL: 120V 50/60 Hz
RESISTANCE: 95 Ω CURRENT: 411 mA

VA: 65.6 WATTAGE: 28.4

* TEMPERATURE RANGE -35° TO +85° C
* COIL TERMINALS #6 BINDING HEAD SCREWS TORQUE TO 7 IN-LB
* LOAD TERMINALS 2-8 AWG COMPRESSION TYPE TORQUE TO 45 IN-LB
* FOUR POLE / SINGLE THROW * MAGNETICALLY ACTIVATED

* MERCURY CONTACTOR 

* LIFE CYCLE ENDURANCE TESTS: U.L. 508 @ 100,00 & CSA 22.2 @ 250,000 CYCLES 

Part numbers are:

4100NO-120A
4100NO-120AH - For Inductive Loads
4100NO-24A
4100NO-24AH - For Inductive Loads
4100NO-220A
4100NO-220AH - For Inductive Loads
4100NO-480A
4100NO-480AH - For Inductive Loads

4100NO-24D
4100NO-24DH - For Inductive Loads

• 100NO Only - Resistive Loads
• AC Resistive
  • 240 VAC @ 100 AMPS
  • 480 VAC @ 80 AMPS
  • 600 VAC @ 70 AMPS
• Tungsten Lamp
  • 120 VAC @ 100 AMPS
• Motor Loads
• Single Phase

• 100NOH - Inductive Loads
• AC Resistive
  • 240 VAC @ 100 AMPS
  • 480 VAC @ 80 AMPS
  • 600 VAC @ 70 AMPS
• AC Inductive
  (P.F. 0.4 or Greater)
  • 120 VAC @ 100 AMPS
  • 240 VAC @ 100 AMPS
• General Purpose
  (P.F. 0.7 or greater)
  • NC 240 VAC @ 80 AMPS
  • NO(H) 240 VAC @ 100 AMPS
  • 480 VAC @ 80 AMPS
• DC Resistive Heating
  • 48 VDC @ 100 AMPS
  • 125 VDC @ 50 AMPS
  • 250 VDC @ 30 AMPS
• Tungsten Lamp
  • 120 VAC @ 100 AMPS
• Motor Loads
  • Single Phase
    • 120 VAC @ 7.5 H.P.
    • 240 VAC @ 10 H.P.
• Three Phase
• 240 VAC @ 15 H.P.
• 480 VAC @ 20 H.P.

MDI Four Pole Contactors are 10-1/8 Inches wide, 5-5/32 inches high and 2-11/16 wide.

Normally Closed relays available upon request. Used mostly for security issues with power outages, Traffic signals and other emergency situations to turn ON batteries or generators.

Contact Anderson-Bolds

Anderson-Bolds
216-360-9800
www.anderson-bolds.com

Carlo Gavazzi Solid State Relays

New Style SSR's from Carlo Gavazzi  and Anderson-Bolds ~ type RG

CARLO GAVAZZI is proud to announce our newest generation of solid state relays and contactors, the RG Series. This new range of AC and DC solid state switching devices is an ideal solution for switching resistive, slightly inductive and motor loads, thanks to the reduced size per unit – starting at only 17.5mm width, up to 85AAC (15Hp) switching, nominal ratings at 40ºC and high SCCR rating of 100kA.

RGS Solid State Relay: The RGS Series provides the market with the slimmest single phase SSR of its kind, with merely 17.5mm of width. Maximum output voltage is 600VAC with a current rating of 90AAC (with proper heat sink). Both the AC and DC control versions are available covering a wide range of input voltages.

RGC Solid State Contactors: This series offers an integrated heat sink solid state solution with the smallest frame size rating of 20 & 23AAC (£3Hp) in just a 17.5mm width, 30AAC/5Hp (22.5mm wide), 40AAC/7.5Hp (35mm wide) 60AAC/10Hp and 85AAC/15Hp (70mm width). Ratings are specified with a surrounding temperature of 40ºC with derating available up to 80ºC. The RGH Series distinguishes itself from the RGC Series with its higher blocking voltage of 1600Vp and high I2T values, thus making the RGH Series ideal when protection by MCBs is desired.

RGS1D/RGC1D DC Output Solid State Relays: This new series of 1-phase solid state DC relays is primarily intended for switching of strings in photovoltaic panels. The output voltage ratings cover the voltage range of 24 to 1,000VDC. The RGS1D Series is rated up to maximum rating of 25ADC (with proper heatsink), while the RGC1D Series (which is an integrated heat sink solution in a 17.5mm width) is rated up to 15ADC, with a surrounding ambient temperature of 60ºC.

The output power terminals on the RGS, RGC and RGH Series can be specified in either a contactor configuration (type ‘E’) or in a solid state relay configuration (type ‘U’). The RG Series solid state relays and contactors are best suited for resistive, slightly inductive and motor loads. Common applications can be found in the HVAC, food and beverage, packaging, plastics, printing, glass and transportation industries. Some of the technical features include: 

	RGS: 25, 50, 75, 90A solid state relays, all in 17.5mm width
	RGC: 20, 23, 30, 40, 60, 85A solid state contactors in 4 widths
	RGH: 20, 23, 30, 40, 60A high blocking voltage SSRs in 4 widths
	RGC and RGH nominal amperage rating given at 40ºC ambient
	AC/DC control voltage, with up to 600VAC line/load rating
	Zero crossing or instant-on switching types

	Industry leading product widths allowing for panel space savings
	Option for screw, box clamp or spring loaded control inputs
	Options for high blocking voltage and I2T
	100kA UL508 SCCR rating with specified fusing The RG Series are cUL listed (RGC, RGH), UL Recognized and CSA approved (RGS), VDE approved & CE certified. call:  216-360-9800 email:  info@anderson-bolds.com contact Anderson-Bolds Order

MDI 35 Amp Mercury Contactors

Anderson-Bolds stocks MDI ( Mercury Displacement Industries ) Mercury Contactors / Relays.

Mercury Displacement Relays / Contactors are ideally suited for use with electric heaters or any other rapid switching application. We also carry the H Series for Inductive Loads. (See Other Blog) The below contactors are for 35 amp loads, single or three phase resistive loads. Part number with a -18 are the same as the below. The -18 was an option for a metal strap in lieu of plastic. The plastic is no longer available so all units are in a sense the -18 units.

MDI 35NO120A, 35 amp Mercury Contactor, Single Pole, 120vac Coil, 600 max volts

MDI 235NO120A, 35 amp Mercury Contactor, Two Pole, 120vac Coil, 600 max volts

MDI 335NO120A, 35 amp Mercury Contactor, Three Pole, 120vac Coil, 600 max volts

MDI 435NO120A, 35 amp Mercury Contactor, Four Pole, 120vac Coil, 600 max volts

MDI 35NO220A, 35 amp Mercury Contactor, Single Pole, 220vac Coil, 600 max volts

MDI 235NO220A, 35 amp Mercury Contactor, Two Pole, 220vac Coil, 600 max volts

MDI 335NO220A, 35 amp Mercury Contactor, Three Pole, 220vac Coil, 600 max volts

MDI 435NO220A, 35 amp Mercury Contactor, Four Pole, 220vac Coil, 600 max volts

MDI 35NO480A, 35 amp Mercury Contactor, Single Pole, 480vac Coil, 600 max volts

MDI 235NO480A, 35 amp Mercury Contactor, Two Pole, 480vac Coil, 600 max volts

MDI 335NO480A, 35 amp Mercury Contactor, Three Pole, 480vac Coil, 600 max volts

MDI 435NO480A, 35 amp Mercury Contactor, Four Pole, 480vac Coil, 600 max volts

MDI 35NO24A, 35 amp Mercury Contactor, Single Pole, 24vac Coil, 600 max volts

MDI 235NO24A, 35 amp Mercury Contactor, Two Pole, 24vac Coil, 600 max volts

MDI 335NO24A, 35 amp Mercury Contactor, Three Pole, 24vac Coil, 600 max volts

MDI 435NO24A, 35 amp Mercury Contactor, Four Pole, 24vac Coil, 600 max volts

MDI 35NO24D, 35 amp Mercury Contactor, Single Pole, 24vdc Coil, 600 max volts

MDI 235NO24D, 35 amp Mercury Contactor, Two Pole, 24vdc Coil, 600 max volts

MDI 335NO24D, 35 amp Mercury Contactor, Three Pole, 24vdc Coil, 600 max volts

MDI 435NO24D, 35 amp Mercury Contactor, Four Pole, 24vdc Coil, 600 max volts

Anderson-Bolds was the first representative for MDI !!

Call to order, 216-360-9800 or email us.

Gavazzi Solid State Contactors

Carlo Gavazzi is launching the REC Series 3-phase Solid State Contactors and Reversing Contactors. The REC Series is twenty times more durable than equivalent mechanical contactors and succeeds in handling high frequency switching. The REC Series is comprised of a 3-pole non-reversing version with three switched phases or a 3-pole non-reversing and reversing versions with two switched phases. The first solution eliminates direct connection from the power supply to motor, while the second one maintains the same performance level while providing relevant cost reduction. The REC is mechanically compatible with Carlo Gavazzi’s CGT-22 line of bimetallic overload modules, by means of a plastic adapter.

The REC Series is cUL listed as a motor starter and it’s main technical features include:

REC2 / REC3 – direct starting of 3-phase motors up to 5Hp at 480VAC REC2R – direct starting and reversing of 3-phase motors up to 5Hp at 480VAC Full load rating at 40°C / 104°F Instant-on switching Rated operational voltage up to 600VAC AC or DC control options Mechanical contactor resemblance with covered heat sink Connects to CGT-22 overload module Control status LED indication DIN-rail or panel mounting

In addition to competitive pricing, the REC Series assures substantial savings, as it reduces system downtime and maintenance costs. The solid state contactors are provided with a 1,600 Vp blocking voltage option that enhances their surge current ratings.

REC is an electronic contactor intended to replace the tradi- tional mechanical counterpart used to switch three phase motors. The range includes 2 and 3 phase switching ver- sions up to 4kW and 600Vrms. Options with high surge cur- rent and I2t for fusing purposes are also available.

The relay switches instantaneously upon application of the control voltage to emulate mechanical relay operation. A covered heatsink resolves any issues with regards to cables running close to the heatsink and eliminates the need for protective earth cabling. The product can be mounted on DIN-rail or on a panel. Note: Specifications stated at 25°C unless specified.

2.2kW

REC2B48D20GKE -

REC2B48A20GKE -

REC3B48D20GKE REC3B48D21GKE

REC3B48A20GKE -

REC3B60D20GKE -

REC3B60A20GKE -

3.0kW

REC2B48D30GKE

REC2B48A30GKE

REC3B48D30GKE

REC3B48A30GKE

REC2B60D30GKE

REC2B60A30GKE

-

-

4.0kW

REC2B48D40GKE

REC2B48A40GKE

Visit our Carlo Gavazzi page.

www.anderson-bolds.com

-

-

Solid State Contactors ~ Gavazzi

CARLO GAVAZZI
A u t o m a t i o n C o m p o n e n t s
Announces new Solid State Contactors and reversing contactors.


Carlo Gavazzi has announced the launch of the REC Series of 3-phase Solid State Contactors and Reversing Contactors. The REC Series is twenty times more durable than equivalent mechanical contactors and succeeds in handling high frequency switching. The REC Series is comprised of a 3-pole non-reversing version with three switched phases or a 3-pole non-reversing and reversing versions with two switched phases. The first solution eliminates direct connection from the power supply to motor, while the second one maintains the same performance level while providing relevant cost reduction. The REC is mechanically compatible with Carlo Gavazzi’s CGT-22 line of bimetallic overload modules, by means of a plastic adapter.
In addition to competitive pricing, the REC Series assures substantial savings, as it
reduces system downtime and maintenance costs. The solid state contactors are provided
with a 1,600 Vp blocking voltage option that enhances their surge current ratings.
The REC Series is cUL listed as a motor starter and complies with the NMFT/NMFT7
requirements. The main technical features include:


• REC2 / REC3 – direct starting of
3-phase motors up to 5Hp at 480VAC
• REC2R – direct starting and reversing of
3-phase motors up to 5Hp at 480VAC
• Full load rating at 40°C / 104°F
• Instant-on switching
• Rated operational voltage up to 600VAC
• AC or DC control options
• Mechanical contactor resemblance with
covered heat sink
• Connects to CGT-22 overload module
• Control status LED indication
• DIN-rail or panel mounting
• cULus listed, CE and RoHS compliant


REC is an electronic contactor intended to replace the traditional mechanical counterpart used to switch three phase motors. The range includes 2 and 3 phase switching versions up to 4kW and 600Vrms.
Options with high surge current and I²t for fusing purposes are also available. The relay switches instantaneously upon application of the control voltage to emulate mechanical relay operation. A covered heatsink resolves any issues with regards to cables running close to the heatsink and eliminates the need for protective earth cabling. The product can be mounted on DIN-rail or on a panel. Note:
Specifications stated at 25°C unless specified.


The solid state contactors are available from Carlo Gavazzi’s North American authorized stocking distributor Anderson-Bolds.

Carlo Gavazzi ~ Automation and Switching Products

Carlo Gavazzi manufactures, markets, and sells a broad range of products for industrial automation. Some of Gavazzi's products areSolid State Relays, Timers, Capacitive Proximity Sensors / Switches, Inductive Proximity Switches / Sensors, Current monitors, Voltage Monitors, Phase Monitors, Digital Panel Meters,Photo Electric Sensors / Switches, Laser Sensors, Ultra Sonic Sensors, Safety Light Curtains,Safety Mats, Mechanical Relays, Contactors, Rotary Disconnect Switches, and Power Supplies.

Carlo Gavazzi offers a complete range of push buttons, selector switches, and indicator lights. Gavazzi

switches are available with flush, extended, and mushroom heads and in a wide variety of colours - both standard and illuminated. Gavazzi push buttons are available with either a plastic or metal ring and in versions for 22 mm and 30 mm mounting.

Gavazzi selector switches are available with long or short handles. Gavazzi short handle types are also available in illuminated versions. Gavazzi selector switches are available with either a plastic or metal ring and are available in versions for 22 mm and 30 mm mounting.
Carlo Gavazzi also offers a broad selection of indicators lights featuring LED lights with a service life in excess of 100,000 hours. In addition to a wide selection of colours, there are various lens types and styles making them suitable for most applications. Gavazzi even offer dual colour indicators and to top off our range, buzzers and flashing buzzers.

Carlo Gavazzi offers a range of motor controllers for soft starting/stopping, dynamic braking, and reversing of three phase squirrel cage motors. Applications include conveyor systems, pumps, compressors, industrial dryers, mixers, automatic doors, palletizers, and fans.
Gavazzi soft starters are available with a ramp characteristic suited to starting both compressors and pumps and furthermore, it includes a 'Kick-Start' feature to start loads with a higher break-away torque. Gavazzi soft start controllers feature internal bypass relays which eliminate the need for large external heatsinks. This minimizes the space requirements in your panel and also greatly reduces the heat generated.

Gavazzi also offer soft starters with built-in over temperature monitoring, thermal monitoring of motor via PTC sensor, and built-in overload protection (class 10 or class 20).

Carlo Gavazzi offers a comprehensive range of solid state relays (SSR’s) featuring direct copper bonding

technology for increased life and reliability. SSR’s are used extensively in the plastics, packaging, food processing, and HVAC industries - primarily for temperature control. They are the logical replacement for mercury contactors. Other applications include lighting and pump switching. Furthermore, many of Gavazzi's relays feature horsepower ratings making them suitable for controlling motorized dampers in HVAC control systems - where their long life and noise-free switching make them ideal replacements for mechanical contactors. Carlo Gavazzi's range includes single phase relays up to 125 amps and 3 phase relays up to 75 amps. They are available with both digital and analogue inputs (4-20 mA or 0-10 V) Furthermore, we also offer a complete range of SSR's with a built-in heatsink.

Carlo Gavazzi offers a comprehensive range of electro-mechanical relays for

industrial automation. We offer relays for switching loads up to 30 Amps with a wide selection of coil voltages. They are available in plug-in and PCB mounting.

Many of our relays come standard with a push-to-test button as well as an LED indicator.
They are frequently used in control panels, in HVAC control systems, pump and compressor control, and electronic and consumer products.
They are typically used to switch loads such as heaters, lights, and motors.

Carlo Gavazzi offers a complete range of Contactors and Overloads for switching currents up to 900 Amps (600 HP @ 480 VAC). All contactors are available with a wide selection of coil voltages and come standard with built-in auxillary outputs. Interlock and wiring kits are available to turn 2 standard contactors into reversing contactors.
In addition, Gavazzi's range also includes Definite Purpose Contactors up to 50 Amps in 1 pole,1 pole + shunt, 2 pole, and 3 pole configurations. The 3 pole types can also be configured as reversing starters. View Brochure
Gavazzi also offer complete enclosed starters with a choice of plastic or metal housing. Starters are available with none or with a start and stop pushbutton. Gavazzi's range also includes Manual Motor Starters up to 100 Amps

Gavazzi's VariFlex2 Series is a compact, user friendly, and feature-laden AC variable speed drive for use with 3-phase AC induction motors up to 3 HP.The drives can be installed side by side (DIN mount or panel mount) thereby freeing up valuable panel space.VariFlex2 drives can be supplied with input voltages from 110 VAC single phase up to 480 VAC three phase.
Configuration of the Variflex2 can be quickly carried out via the front panel or via the RVEFSoft software (which can be download free of charge online) ensuring you are up and running in no time.

• Sensorless vector control (with high starting torque) or V/F control
• Speed control via front panel (digitally or via an adjustable knob)
• PID function
• I/O expansion (2 input/1 output insulated)
• DIN rail or panel mounting and remote Keypad available
• RS232 or RS485 MODBus RTU/ASCII serial communications available on all models through an option card
• Copy card option for fast and easy setup of identical drives

Anderson-Bolds and Carlo Gavazzi Products