Meltric DSN Spec

Anderson-Bolds and Meltric present the DSN series of deContactor. Safety First.

Detailed spec for MELTRIC DECONTACTOR Series Switch Rated Plugs & Receptacles

Note to specifying engineer: In order to specify Meltric DECONTACTOR Series plugs and receptacles, include one or all of the items below in your job specification. The items in bold are exclusive to Meltric Decontactors and thus should be included in the specification wherever practical to avoid substitution of pin and sleeve or twist type devices.

1. Plugs and receptacles must be listed to UL Subject 2682 'Switch Rated Plugs and Receptacles.' (Alternate for Canada: Plugs and receptacles must be CSA listed to UL Subject 2682 'Switch Rated Plugs and Receptacles').
2. Plugs and receptacles must have constant pressure butt-contacts with solid silver-nickel tips. Pin and sleeve contacts are not permitted.
3. Receptacles must have dead front construction: live parts must be inaccessible to thin tool or wire.
4. Plugs and receptacles must be able to close at least once on a conditional short-circuit current of 65,000A. (Short circuit testing should be performed with RK1 current limiting fuses sized at 400% of the highest full load motor ampacity associated with the device).
5. Plugs and receptacles must incorporate an integral switching mechanism to ensure the load is broken before the plug is removed from the receptacle.
6. Plug and receptacle wire terminals must be spring-assisted to prevent loosening due to conductor yielding, shocks, vibrations or thermal cycling.
7. The minimum environmental rating of plugs and receptacles must be NEMA 3R (DS Series), NEMA 4X and IP 66+67 (DSN Series), or IP67 (DB Series).
8. Ingress protection must be achieved automatically when the plug is fully inserted into the receptacles, without additional manual operation (except DB Series).
9. Plugs and receptacles must have a system of different keying positions in order to discriminate between circuits or incompatible operating voltages or frequencies.
10. Plugs and receptacles installed outdoor must be able to withstand UV radiation.
11. Plugs and receptacles shall be Meltric Decontactor Series or equal.

866-360-9810

Stack Lights - Wall Mount - Menics

Anderson-Bolds and Amerimation ( Menics ) offer unique wall mount Stack lights.

Slim Profile Wall Mount
LED, 1-3 Stack (RYG)
Vertical or Horizontal Mount
Steady, Flashing, Buzzer
IP 65 or IP 56 (w/buzzer)
194 x 90 x 40 mm

• Slim Profile Wall Mount

• Easy Mounted vertically and horizontally

• Equivalent brightness in every angle

• Steady and flashing lights

• Vibration and moisture resistant

• Chrome or tan colored body

Please note the the voltage code FF (90-240 VAC) replaced the voltage code 10.

PWE-102-R

PWE-102-Y PWE-102-G

PWE-1FF-G

PWE-1FF-R PWE-1FF-Y

PWE-202-RG

PWE-202-RY

PWE-2FF-RG

PWE-2FF-RY

PWE-302-RYG

PWE-3FF-RYG

PWE-Cover

PWEB-102-R

PWEB-102-Y PWEB-102-G

PWEB-1FF-R PWEB-1FF-G

PWEB-1FF-Y

PWEB-202-RG

PWEB-202-RY

PWEB-2FF-RG

PWEB-2FF-RY

PWEB-301-RYG

PWEB-302-RYG

PWEB-3FF-RYG

PWEC-302-RYG

PWEC-Cover

PWECB-2FF-RG

PWECF-2FF-RY

PWECF-302-RYG

PWECZ-102-Y

PWECZ-2FF-RY

PWEF-102-R PWEF-102-Y PWEF-102-G

PWEF-1FF-G PWEF-1FF-Y

PWEF-202-RG

PWEF-202-RY

PWEF-2FF-RG

PWEF-2FF-RY

PWEF-302-RYG

PWEF-3FF-RYG

PWEZ-102-R

PWEZ-102-Y PWEZ-102-G

PWEZ-1FF-R PWEZ-1FF-G PWEZ-1FF-Y

PWEZ-202-RG

PWEZ-202-RY

PWEZ-2FF-RG

PWEZ-2FF-RY

PWEZ-302-RYG

PWEZ-3FF-RYG

Please note the the voltage code FF (90-240 VAC) replaced the voltage code 10.

MOST LIGHTS ARE AVAILABLE TO SHIP WITHIN 24 HOURS.

866-360-9810

info@anderson-bolds.com

www.anderson-bolds.com

Tower Lights by Menics

Anderson-Bolds supplies Menics tower and stack lights.

The PRE series comes with up to 5 lights, in RED, GREEN, YELLOW, BLUE, and CLEAR.

Voltages are 24/60, 120/60, 220/60, 12vdc, 24vdc.

Call or email Anderson-Bolds to order or with Questions. 216-360-9800

PRE-101-R
PRE-102-B
PRE-102-C
PRE-102-G
PRE-102-R
PRE-102-Y
PRE-110-B
PRE-110-G
PRE-110-R
PRE-110-Y
PRE-120-R
PRE-201-RG
PRE-202-BY
PRE-202-RG
PRE-202-RY
PRE-202-YC
PRE-210-GB
PRE-210-RG
PRE-210-RY
PRE-210-YB
PRE-220-RG
PRE-301-RYG
PRE-302-GYB
PRE-302-RGC
PRE-302-RYB
PRE-302-RYG
PRE-310-BYR
PRE-310-RGC
PRE-310-RYG
PRE-320-RYG
PRE-401-RYGB
PRE-402-RYCG
PRE-402-RYGB
PRE-410-CBYR
PRE-410-RYCG
PRE-410-RYGB
PRE-501-RYGBC
PRE-502-BRRCG
PRE-502-RYGBC
PRE-510-RYGBC
PRE-CAP
PREF-101-B
PREF-101-R
PREF-101-Y
PREF-102-B
PREF-102-C
PREF-102-G
PREF-102-R
PREF-102-Y
PREF-110-B
PREF-110-G
PREF-110-R
PREF-110-R*
PREF-110-Y
PREF-120-R
PREF-201-RB
PREF-201-RG
PREF-202-CC
PREF-202-RB
PREF-202-RG
PREF-202-RY
PREF-202-YG
PREF-210-BC
PREF-210-GB
PREF-210-GY
PREF-210-RB
PREF-210-RC
PREF-210-RG
PREF-210-RY
PREF-220-RG
PREF-301-RYG
PREF-302-GRB
PREF-302-RCB
PREF-302-RYB
PREF-302-RYG
PREF-310-RCB
PREF-310-RYB
PREF-310-RYC
PREF-310-RYG
PREF-310-RYG*
PREF-320-RYG
PREF-401-RYGB
PREF-402-RBGG
PREF-402-RYGB
PREF-410-GYRC
PREF-410-RYGB
PREF-410-RYGB*
PREF-502-RYGBC
PREF-510-RYGBC
PREF-510-RYGBC*
PRELED-5B
PRELED-5B-12
PRELED-5C
PRELED-5C-12
PRELED-5G
PRELED-5G-12
PRELED-5R
PRELED-5R-12
PRELED-5Y
PRELED-5Y-12

Other series of Tower lights are:
PTM
PTE
PME
PAE
PWE

3L Filters by CCI Thermal

Coming soon To Anderson-Bolds

3L Filters™ from CCI Thermal Technologies Inc. has exceeded the most demanding industrial filtration requirements for over 40 years. A broad range of standard and custom products includes liquid filters, strainers, separators, pressure vessels, and engineered products and systems. 3L Filters™ has special expertise for nuclear, petrochemical, water treatment and environmental applications.

3L Filters™ upholds the very highest standards of quality in the design and production of our filtration systems, which has made 3L an industry leader in our field. Products are specifically designed to meet ASME VIII Div. 1 and/or Nuclear SEC III CL-1 standards. Additionally, 3L Filters™ has the capability to design and build engineered filtration systems to customer specifications for virtually any application in any environment.

ACF - Activated Carbon Filter

VC - Clay Treater

L - Dehydrator

FGCS - Fuel Gas Conditioning System

FM - Fuel Monitor

GFS - Gas Filter Separator

HV - Liquid Filter Separator (Two Stage Horizontal)

Liquid Filter Separator (Two Stage Vertical)

VV - Liquid Filter Separator (Two Stage Vertical)

WAL - Liquid Filter Separator (Three Stage Horizontal)

FLODRI - Flo-Dri Natural Gas Scrubbing System

NGS1000 Natural Gas Scrubbing System

Liquid Filter Separator (Two Stage Vertical)

www.anderson-bolds.com

Other products by CCI Thermal

Cata-Dyne

Ruffneck

Caloritech

Norseman

DriQuik

WATLOW RM Multi-Zone CONTROLLERS

Integrated Multi-Function Controllers

EZ-ZONE^® RM

The EZ-ZONE^® RM controller simplifies thermal system management. The EZ-ZONE RM integrated controller family is comprised of six module types: an integrated on-off or PID control, monitoring and over/under temperature limit controller module, a high-density on-off or PID control module, a high-density limit-only module, an input/output (I/O) expansion module, a high-density monitor/scanner module and a data logging and field communications access module. A system is configured by connecting any combination of module types to address specific application needs. The EZ-ZONE RM is extremely flexible and scalable allowing mixing and matching of I/O to configure 1 to 152 control loops and up to 256 monitor points.

Multiple inputs; from 1 to 152 PID loops of control or monitor up to 256 analog inputs:

• Mix and match I/O to fit any application; from 1 input with 2 outputs to 152 analog inputs with 152 outputs, or monitor up to as many as 256 analog inputs all in one system
• Reduce cost because only required loops are purchased
• Allows a common controller platform across many design applications as both loops and outputs can be ordered in single increments

Advanced PID control algorithm:

• Offers TRU-TUNE^®+ adaptive control to provide tighter control for demanding applications
• Enables auto-tune for fast, efficient start-up

Communication capabilities:

Provides a range of protocol options including universal serial bus (USB) device port, Modbus^® RTU, EtherNet/IP™, Modbus^® TCP, DeviceNet™ and PROFIBUS DP

USB Port:

Provides data log retrieval

SPLIT-RAIL control:

• Enables modules mounted in separate high-voltage and low-voltage cabinets to function as an integrated system
• Minimizes the length and cost of wire runs and improves system reliability by locating inputs closer to sensors and outputs closer to load

AUTO CLONE:

Reduces time and configuration complexity by automatically building a new module with the same parameter settings as the replaced module

SENSOR GUARD:

Prevents unplanned process shutdowns and product loss by switching to a backup sensor if the primary sensor fails

Additional Key Functions

• Configuration communication port (standard bus)

• Removable modules and connectors

• Ring lug and front-screw terminal options

• Profile ramp soak with 400 total steps

• Retransmit and remote set point input virtually inside controller eliminating costs for input/output hardware

• User configuration settings can be stored and recalled

• Thermistor input

• Elevated operating range of 0 to 149°F (-18 to 65°C)

• UL® listed, CSA, CE, RoHS, W.E.E.E. FM, SEMI F47-0200,

Class 1, Div. 2 rating on selected models

Visit Anderson-Bolds' Watlow Page

Watlow Part's Request

216-360-9800

NOVUS AUTOMATION

Welcome to Novus

Novus Electronics is a manufacturer of instruments for control, data acquisition and supervisory systems, mainly for factory automation. In addition to the technical expertise of its team, what makes Novus truly special is its ability to offer flexible and complete solutions for each customer and its constant search to overcome challenges. PRODUCTS:

Controllers & Indicators

Electronic Thermostats

Data Acquisition & SCADA

Data Loggers

Signal Conditioners & Isolators

Wireless

Pressure Transmitters

Humidity & Temperature

Thermometers & Calibrators

Timers & Counters

Solid State Relays

Novus products coming from Anderson-Bolds soon.

Visit our website here.

Contact Anderson-Bolds

Gavazzi Photo Electric M18 switches ~ PA series

Carlo Gavazzi PA 18 Series Photo Electrics

A cost- saving solution perfectly tailored to automation applications, ensuring maximum precision in object detection.

Lainate, March 2011 – Carlo Gavazzi Automation – the international electronics Group with activities in the design, manufacture and marketing of electronic equipment, launches PA18, the new range of M18 Powerful Photoelectric Sensors. The PA18 is a new series of cost-effective sensors perfectly tailored to automation applications with a good price/performance ratio. Offered in a compact M18 threaded ABS housing, this new sensor series is a space saving solution, available in both axial (straight) and radial (90° rightangled)versions. The PA18 is fitted with a new smart, cost saving accessory which allows quick and easy wall mounting and setup from 1 to 4.5mm. Thanks to the built-in microprocessor, the new M18 powerful photoelectric sensors guarantee advanced filtering and detection, ensuring secure and flexible customized solutions. This sensor has been designed in order to avoid false detection caused by lighting or electromagnetic interference, thus reducing system maintenance while increasing application uptime. Furthermore, due to the efficient aspherical lens design, the PA18 sensors benefit from a longer sensing distance as well as high-speed detection. These new devices are distinguished by their reliability under the harshest cleaning conditions. The PA18 range can resist water pressure up to 100 bar and cleaning agents and disinfectants, complying with the requirements set out by ECOLAB, IP67, IP69K. “The launch of this new family of photoelectric sensors is very important for Carlo Gavazzi and allows us to stay competitive in the Material Handling, Packaging, Textile and Food & Beverage markets”, says Torben Rochat – International Product Manager. “Our intention is to offer our customers a more powerful product range and, for this reason, we have concentrated our efforts on the update of the M18 sensors. We are confident that the PA18 series will be warmly welcomed on the market and will help us to extend our business”. The PA18 range is developed by Carlo Gavazzi’s unit in Denmark and has a very precise and linear sensitivity adjustment which, through a manual potentiometer, allows accurate and easy setting from close distances to full range. Main technical features • Diffuse reflective (energetic) 1m/0.8m at 90% reflectance • Polarized retro-reflective ver. 5m/4m at ER4 reflector Ø80mm • Retro-reflective 6.5m/5m at ER4 reflector Ø80mm • Through-beam versions 20m/16m • Power supply: 10 to 30 VDC • Output current rating: 100 mA • Output voltage drop: 2,0 VDC @ 100mA • Operating frequency 500 imp./sec. • 2 outputs -Normally Open NO, Normally Closed NC • Short-circuit, reverse polarity and overload protected • Separate models available for NPN or PNP outputs • Available in 2m cable or quick-disconnect 4-pin M12 connector • Temperature range: -25°C to +60°C • Diagnostic LED indication (Green and Yellow LED) • IP67, IP69K • ECOLAB approved/CE-marking /cULus approved according to UL508 • Laser engraving (inscription resists high pressure cleaning) www.anderson-bolds.com 216-360-9800

Gavazzi Solid State Contactors

Carlo Gavazzi is launching the REC Series 3-phase Solid State Contactors and Reversing Contactors. The REC Series is twenty times more durable than equivalent mechanical contactors and succeeds in handling high frequency switching. The REC Series is comprised of a 3-pole non-reversing version with three switched phases or a 3-pole non-reversing and reversing versions with two switched phases. The first solution eliminates direct connection from the power supply to motor, while the second one maintains the same performance level while providing relevant cost reduction. The REC is mechanically compatible with Carlo Gavazzi’s CGT-22 line of bimetallic overload modules, by means of a plastic adapter.

The REC Series is cUL listed as a motor starter and it’s main technical features include:

REC2 / REC3 – direct starting of 3-phase motors up to 5Hp at 480VAC REC2R – direct starting and reversing of 3-phase motors up to 5Hp at 480VAC Full load rating at 40°C / 104°F Instant-on switching Rated operational voltage up to 600VAC AC or DC control options Mechanical contactor resemblance with covered heat sink Connects to CGT-22 overload module Control status LED indication DIN-rail or panel mounting

In addition to competitive pricing, the REC Series assures substantial savings, as it reduces system downtime and maintenance costs. The solid state contactors are provided with a 1,600 Vp blocking voltage option that enhances their surge current ratings.

REC is an electronic contactor intended to replace the tradi- tional mechanical counterpart used to switch three phase motors. The range includes 2 and 3 phase switching ver- sions up to 4kW and 600Vrms. Options with high surge cur- rent and I2t for fusing purposes are also available.

The relay switches instantaneously upon application of the control voltage to emulate mechanical relay operation. A covered heatsink resolves any issues with regards to cables running close to the heatsink and eliminates the need for protective earth cabling. The product can be mounted on DIN-rail or on a panel. Note: Specifications stated at 25°C unless specified.

2.2kW

REC2B48D20GKE -

REC2B48A20GKE -

REC3B48D20GKE REC3B48D21GKE

REC3B48A20GKE -

REC3B60D20GKE -

REC3B60A20GKE -

3.0kW

REC2B48D30GKE

REC2B48A30GKE

REC3B48D30GKE

REC3B48A30GKE

REC2B60D30GKE

REC2B60A30GKE

-

-

4.0kW

REC2B48D40GKE

REC2B48A40GKE

Visit our Carlo Gavazzi page.

www.anderson-bolds.com

-

-

Diffuse Photo Electrics By Carlo Gavazzi

Carlo Gavazzi and Anderson-Bolds bring you a new simple Photo Electric sensor design.  The Carlo Gavazzi Radial design is new to the industry.

The Carlo Gavazzi PA18CAD10... is part of a family of inexpensive general purpose diffuse reflective sensors in industrial standard 18 mm cylindrical ABS housing. The sensors are useful in applications where high- accuracy detection as well as small size is required.

The Compact housing and high power LED work well for an excellent performance-size ratio. The potentiometer used for adjustment of the sensitivity makes the sensors highly flexible. The output type is PNP or NPN and the output switching function is NC and NO.

Features

• Miniature sensor range

 • Range: 5m (Axial), 4 m (Radial)

 • Potentiometer sensitivity adjustment

 • Modulated, infrared light 850 nm

 • Supply voltage: 10 to 30 VDC

 • Output: 100 mA, PNP or NPN, N.C. & N.O.

 • Degree of protection IP67, IP69K

 • LED indication for output, stability and power ON

 • Protection: reverse polarity, short circuit and transients

 • Plug and cable versions

 • Excellent EMC performance

 • M18 Housing ( and industry standard )

• ECOLAB – CE – UL – cUL Approvals

Specifications

Environmental Installation category III (IEC 60664/60664A; 60947-1)

Environmental Pollution degree 3 (IEC 60664/60664A; 60947-1)

Environmental Degree of protection IP 67, IP 69K

Rated operating distance (Sn)

Axial type (A)   Up to 1 meter

Radial type (R) Up to .8 meter

Ambient temperature

Operating   -25° to +60°C (-13° to +140°F)

Storage      -40°to +70°C (-40°to +158°F)

Vibration  10 to 55 Hz, 0.5 mm/7.5 g (IEC 60068-2-6)

Rated insulation voltage  500 VAC (rms) IEC protection class III

Housing material

Body  ABS, grey

Front material   PMMA, red

Connection

Cable  PVC, grey, 2 m 4x0.25mm2,Ø=4.5mm

Plug   M12, 4-pin (CONM14NF-series)

Indication

Output ON   LED, yellow

Signal stability and power ON  LED, green

Light spot Diameter  Ø 164 mm @ 3.25 m

Light source  LED, 850 nm

Light type  Infrared, modulated

NPN Make & break switching – DIFFUSE sensors

PA 18 CAD NASA        Axial Style with cable      ( PA18CAD08NASA )

PA 18 CAD 10 NAM1SA   Axial Style with Plug       ( PA18CAD08NAM1SA )

PA 18 CRD NASA  Radial Style with cable   (  PA18CRD08NASA )

PA 18 CRD 08 NAM1SA   Radial Style with plus     ( PA18CRD08NAM1SA )

PNP Make & break switching - DIFFUSE sensors

PA 18 CAD 10 PASA       Axial Style with cable      ( PA18CAD10PASA )

PA 18 CAD 10 PAM1SA  Axial Style with plug        ( PA18CAD10PAM1SA )

PA 18 CRD 08 PASA       Radial Style with Cable   ( PA18CRD08PASA )

PA 18 CRD 08 PAM1SA   Radial Style with plug     ( PA18CRD08PAM1SA )

Accessories

• Connector type CONG1A.. / CONM14NF.. series • Reflector type ER.. - to be purchased separately

Anderson-Bolds authorized Distributor for Carlo Gavazzi.

Located in Ohio with offices in Cincinnati, Cleveland and Columbus

216-360-9800 ~ 513-528-5680 ~ 614-885-3933

info@anderson-bolds.com