Sunday, February 22, 2015

Watlow 1/4 DIN Temperature Controllers

Watlow Process 1/4 DIN Controllers from Anderson-Bolds

The Watlow SERIES F4 1⁄4 DIN temperature process controller offers performance features to meet a wide range of industrial processing needs. The F4 process controller is ideal for semiconductor manufacturing equipment, plastic processing and packaging equipment and industrial process control applications.
The F4 Watlow process controller features a four line, high definition LCD interface display, in addition to an information key that enables easy set up and control operation, minimizing the chance for error. Its 16-bit microprocessor ensures accuracy and delivers performance advantages you can count on from a Watlow controller.
Four digital inputs remotely modify the F4’s operation or enable display of pre-defined operator messages. Advanced process controller features include cascade, ratio, differential, duplex slide wire and retransmit options.
Serial communication and dual alarm relays are included in the base unit. The WATLOW SERIES F4 is packaged with a
NEMA 4X front face to withstand harsh environments anda four-inch (101.6 mm) deep case with removable connectors for wiring convenience. It is manufactured by Watlow, ISO 9001 registered and protected by a three-year warranty.
Use our Watlow Parts form to get a quote.
Watlow F4 Process Controller

Features and Benefits
Guided setup
  • Removes “guess work” from the setup process 
  • Saves time by reducing programming errors 
  • High definition four-line LCD display 
  • Simplifies setup process and operations 
  • Quickly and easily identifies process, alarm and
    set point values 
  • Information “I” Key 
• Displays essential elements from the user manual on board
Customized menuing
  • Quickly displays up to 16 parameters 
  • Allows users to create custom messaging and easily
    identify key events or alarms 
  • High performance 16-bit microprocessor 
  • Provides precise process control with 20Hz update rate on input 1. (10Hz on inputs 2 and 3) 
  • Calibration accuracy of ±0.1 percent of span 
  • Universal input 
  • • Embedded software provides application versatility 
  • • Eliminates the need for dip switches 
  • Modbus® communications ready 

• Equipped to handle RS232 or EIA485 communications
Example Watlow F4P Temperature Controller Part numbers:
F4PH-EEA-01RG - Watlow Process Temperature Controller
Controller with 2 relay outputs and standard control operation.
F4PH-EEB-01RG - Watlow Process Temperature Controller
Controller with 2 relay outputs and enhanced control operation (dual universal inputs, cascade, ratio, duplex, differential, slide wire)
F4PH-FEA-11RG - Watlow Process Temperature Controller
Controller with analog output and a relay output and standard control operation and retransmit analog signal.
F4PH-FEB-11RG - Watlow Process Temperature Controller
Controller with analog output and a relay output and enhanced control operation (dual universal inputs, cascade, ratio, duplex, differential, slide wire) and retransmit analog signal.

The Watlow EZ-ZONE®PM panel mount 1/4 DIN controller offers control options that reduce system complexity and thermal loop ownership cost. It can be ordered as a PID controller, an over/under limit controller or its functions can be combined into an integrated controller. An option to integrate a high amperage power controller output with a high-performance PID controller and an over/under limit controller in one space-saving, panel mount package is also available. Many communications options are offered to support connectivity needs.
Because the Watlow EZ-ZONE PM panel mount controller is highly scalable, you pay only for what is needed. This controller is available in 1⁄32,1⁄16,1⁄8 and1⁄4 DIN panel mount packages. The Watlow EZ-ZONE PM controller is easy to use and is ideal for PID controller, over/under limit controller or integrated controller needs.

Watlow PM EZ-Zone Controllers


Features and Benefits
Integrated PID and limit controller
Reduces wiring time and termination complexity
compared with connecting discrete products
Decreases required panel space
Lowers installation costs
Increases user and equipment safety for over/under
temperature conditions
High amperage power control output
Drives 15 ampere resistive loads directly
Reduces component count
Decreases cost of ownership
Current monitoring
Detects heater current flow and provides alarm indication
of a failed output device or heater load
Drives output on open or shorted heater
Serial communication capabilities
Provides a wide range of protocol choices including
Modbus(R) RTU, EtherNet/IP™, Modbus(R) TCP, PROFIBUS
DP and DeviceNet™
Supports network connectivity to a PC or PLC
Dual-channel controller
Provides two PID controllers in one space-saving package
Enhanced control options
Easily handles complex process problems such as
cascade, ratio, differential, square-root, motorized valve
control without slidewire feedback, wet-bulb/dry-bulb,
compressor control and peltier loads
Countdown timer option
Provides batch process control
Supports set point change during countdown
Advanced PID control algorithm
Offers TRU-TUNE(R)+ adaptive control to provide tighter
control for demanding applications
Provides auto-tune for fast, efficient start-up
Configuration communications with software
Includes Watlow standard bus communications and
EZ-ZONE configurator software
Saves time and improves reliability of controller setup
Ten-point linearization curve
Improves sensor accuracy
Built-in sensor compensation curves
Saves cost of buying compensated sensors
Includes Vaisala RH and altitude (pressure) curves
Remote set point operation
Supports convenient set point manipulation from a
remote device such as a master control or PLC
Profile capability
Offers pre-programmed process control
Allows ramp/soak programming with 40 total steps,
battery backup and real time clock
Retransmit Output
Supports industry needs for recording
Factory Mutual (FM) approved over/under limit with
auxiliary outputs
Increases user and equipment safety for over/under
temperature conditions
Memory for saving and restoring parameter settings
Decreases service calls and time down
Agency approvals: UL® listed, CSA, CE, RoHS, W.E.E.E.,
FM, SEMI F47-0200, Class 1, Div. 2 rating on selected
models
Assures prompt product acceptance
Reduces end product documentation costs
Touch-safe package
Increases safety for installer/operator
Complies with IP2X requirements
Consistent termination labeling connection system
Simplifies switching between products
Speeds up user’s system documentation
EZ-KEY
Enables simple, one-touch operation of user-defined,
repetitive activities
Programmable menu system
Reduces setup time and increases operator efficiency
Three-year warranty

Provides product support and reliability

Watlow EZ-ZONE PM PM4C1EA-AAAAAAA Integrated PID Digital Display Temperature Control, 1/4 DIN, PID Control, Two 4 digit digital displays, Universal input, 100-240 VAC
Output 1: 5 amp Form C Mechanical Relay

Watlow EZ-ZONE PM PM4C1EJ-AAAAAAA Integrated PID Digital Display Temperature Control, 1/4 DIN, PID Control, Two 4 digit digital displays, Universal input, 100-240 VAC
Output 1: 5 amp Form C Mechanical Relay 
Output 2: 5 amp Form A Mechanical Relay

Watlow EZ-ZONE PM PM4R1EJ-AAAAAAA PID Digital Display Temperature Control, 1/4 DIN, PID Control with RAMP SOAK capability, Two 4 digit digital displays, Universal Sensor input, 100-240 VAC
Output 1: 5 amp Form C Mechanical Relay 
Output 2: 5 amp Form A Mechanical Relay

Watlow EZ-ZONE PM PM4C1EJ-AAEAAAA Integrated PID Digital Display Process/Temperature Control, 1/4 DIN, PID Control, Two 4 digit digital displays, Universal input, 100-240 VAC
Output 1: 5 amp Form C Mechanical Relay 
Output 2: 5 amp Form A Mechanical Relay
Output 3: 5 amp Form C Mechanical Relay

Watlow EZ-ZONE PM PM4C1EJ-AAEKAAA Integrated PID Digital Display Temperature Control, 1/4 DIN, PID Control, Two 4 digit digital displays, Universal Sensor input, 100-240 VAC
Output 1: 5 amp Form C Mechanical Relay 
Output 2: 5 amp Form C Mechanical Relay
Output 3: 5 amp Form C Mechanical Relay
Output 4: SSR Form A, 0.5A

Watlow EZ-ZONE PM PM4C4KH-ALEJAAA Integrated PID Digital Temperature Control, 1/4 DIN, PID Control, Two 4 digit digital displays, Universal input, 20-28 VAC and 12-40 VDC
Output 1: SSR Form A, 0.5A
Output 2: NO-ARC 15 A power control
Output 3: 5 amp Form C Mechanical Relay
Output 4: 5 amp Form A Mechanical Relay

Watlow EZ-ZONE PM PM4C1KK-ALEJAAA Integrated PID Digital Display Temperature Control, 1/4 DIN, PID Control, Two 4 digit digital displays, Universal input, 100-240 VAC
Output 1: SSR Form A, 0.5A
Output 2: SSR Form A, 0.5A
Output 3: 5 amp Form C Mechanical Relay
Output 4: 5 amp Form A Mechanical Relay

Watlow EZ-ZONE PM PM4C4FJ-6AAAAAA Integrated PID Digital Temperature Control, 1/4 DIN, PID Control, Two 4 digit displays, Universal input, 20-28 VAC and 12-40 VDC
Output 1: Universal Process - 4-20mA, 0-10vdc, 0-20mA
Output 2: None
Output 3: None
Output 4: None
Communications: PROFIBUS DP

Watlow EZ-ZONE PM PM4C4FJ-3AAAAAA Integrated PID Digital Display Temperature/Process Control, 1/4 DIN, PID Control, Two 4 digit digital displays, Universal input, 20-28 VAC and 12-40 VDC
Output 1: Universal Process - 0-10vdc, 0-20mA, 4-20mA
Output 2: 5 amp Form A Mechanical Relay
Output 3: None
Output 4: None
Communications: EtherNet/IP/Modbus TCP

For questions/quotes/comments email to wallow@anderson-bolds.com

216-360-9800 / 614-885-3933

No comments:

Post a Comment