Friday, March 23, 2012

Meltric DSN 30 Part numbers

Anderson-Bolds and Meltric can supply 30 amp Pin and Sleeve connectors.
Meltric DSN plugs and receptacles are also disconnect switches.

If you have a Meltric Part number and you want a quote, please go to our contact FORM HERE

Spare parts are listed below.

61-3A010 DSN30 INLET INTERIOR
61-3A010-B DSN30 MALE INTERIOR BOTTOM
61-3A010-T DSN30 MALE INTERIOR TOP
61-3A011 DSN30 INLET CONTACT (W/PILOTS)
61-3A011-380 DSN30 INLET CONTACT W/O PILOTS
61-3A013 DSN30 HANDLE
61-3A013-1 DSN30 HANDLE
61-3A013-114 DSN30 HANDLE
61-3A013-12 DSN30 HANDLE
61-3A013-34 DSN30 HANDLE W/ 3/4" NPT
61-3A014 DSN30 INLET CASING
61-3A020 DSN30 RECEPTACLE INTERIOR
61-3A020-B DSN30 RECP INTERIOR BOTTOM
61-3A020-T DSN30 FEMALE INTERIOR TOP
61-3A021 DSN30 RECP CONTACT (W/PILOTS)
61-3A021-380 DSN30 RECP CONTACT W/O PILOTS
61-3A023-12 DSN30 CONDUIT BOX
61-3A023-34 DSN30 CONDUIT BOX
61-3A024 DSN30 RECEPTACLE CASING
61-3A024-843 DSN30 REC CASING W/PADLOCK PAW
61-3A027 DSN30 ANGLE, POLY
61-3A053-080-1 DSN30 ANGLE/BOX W/ 1" NPT
61-3A053-080-12 DSN30 ANGLE/BOX
61-3A053-080-34 DSN30 ANGLE/BOX
61-3A126 DSN30 INLET CAP
61-3A346 DSN30 FINGER DRAWPLATE KIT BAG
61-3A826 DSN30 LOCKING CAP
61-3AB26 DSN30 BLUE GASKET
61-3AC26 DSN30 ORANGE GASKET
61-3AJ26 DSN30 YELLOW GASKET
61-3AM26 DSN30 MARECHAL GASKET
61-3AN26 DSN30 BLACK GASKET
61-3AR26 DSN30 RED GASKET

Plugs, Receptacles, handles and angle boxes are below.

63-34042 DSN30 RECEPTACLE
63-34043 DSN30 RECEPTACLE
63-34043-270 DSN30 RECEPTACLE
63-34043-270-NC DSN30 REC W/MICROSWITCH
63-34043-375 DSN30 RECEPTACLE
63-34043-843 DSN30 RECEPTACLE
63-34043-972 DSN30 RECEPTACLE W/2 PILOTS
63-34043-972-348-A188 DSN30 REC W/2 PILOTS, 348 PAWL
63-34043-972-375 DSN30 RECEPTACLE
63-34043-972-NC DSN30 RECEPTACLE W/2 PILOTS
63-34045 DSN30 RECEPTACLE
63-34047 DSN30 RECEPTACLE
63-34047-972 DSN30 RECEPTACLE W/2 PILOTS
63-34072 DSN30 RECEPTACLE
63-34072-270 DSN30 RECEPTACLE W/MICROSWITCH
63-34073 DSN30 RECEPTACLE
63-34073-NC DSN30 RECEPTACLE
63-34075 DSN30 RECEPTACLE
63-34076 DSN30 RECEPTACLE
63-34142 DSN30 RECEPTACLE
63-34143 DSN30 RECEPTACLE
63-34143-972-270 DSN30 RECP 2PILOTS,MICROSWITCH
63-34147 DSN30 RECEPTACLE
63-34162 DSN30 RECEPTACLE
63-34163 DSN30 RECEPTACLE
63-34167 DSN30 RECEPTACLE
63-34167-375 DSN30 RECEPTACLE
63-38042 DSN30 INLET
63-38043 DSN30 INLET
63-38043-338-A188 DSN30 INLET W/ PRL AND
63-38043-972 DSN30 INLET W/2 PILOTS
63-38043-972-A188 DSN30 INLET
63-38045 DSN30 INLET
63-38047 DSN30 INLET
63-38047-972 DSN30 INLET W/2 PILOTS
63-38047-NNF DSN30 INLET
63-38072 DSN30 INLET
63-38073 DSN30 INLET
63-38073-972 DSN30 INLET W/2 PILOTS
63-38075 DSN30 INLET
63-38076 DSN30 INLET
63-38076-NNF DSN30 INLET
63-38142 DSN30 INLET
63-38143 DSN30 INLET
63-38147 DSN30 INLET
63-38147-972-NNF DSN30 INLET W/2 PILOTS
63-38162 DSN30 INLET
63-38163 DSN30 INLET
63-38167 DSN30 INLET

Buy DSN 30 Meltric parts here!

866-360-9810

Thursday, March 8, 2012

Pepperl and Fuchs Stock at Anderson-Bolds

216-360-9800




No. Description Vendor No.
BF12 P&F MOUNTING BRACKET PEPPERL
CJ10-30GK-WO P&F CAPACITIVE SENSOR PEPPERL
CJ4-12GK-N P&F CAPACITIVE SENSOR PEPPERL
KFD2-ST2-EX2 P&F K-SYSTEM DIGITAL ISOLATOR PEPPERL
MH4-2681-UNI P&F UNISTRUT BRACKET PEPPERL
NBB15-30GM50-WS-V12 P&F PROX. SWITCH PEPPERL
NBB2-12GM50-E0 P&F INDUCTIVE SENSOR-DC PEPPERL
NJ10-30GM50-E P&F INDUCTIVE SENSOR-DC PEPPERL
NJ10-30GM50-E2 P&F INDUCTIVE SENSOR-DC PEPPERL
NJ15+U4+DW2-100 P&F INDUCTIVE SENSOR-AC PEPPERL
NJ1.5-8GM-N P&F INDUCTIVE SENSOR PEPPERL
NJ20+U4+W P + F INDUCTIVE SENSOR PEPPERL
NJ20-U4-E P&F INDUCTIVE SENSOR-DC PEPPERL
NJ20-U4-E2 P&F INDUCTIVE SENSOR-DC PEPPERL
NJ2-12GM40-E3 P&F INDUCTIVE SENSOR PEPPERL
NJ2-12GM40-E-V1 P&F INDUCTIVE SENSOR-DC PEPPERL
NJ2-12GM50-WS P&F INDUCTIVE SENSOR-AC PEPPERL
NJ2-12GM-N P&F INDUCTIVE SENSOR PEPPERL
NJ30-U1-E2 P&F INDUCTIVE SENSOR-DC PEPPERL
NJ40-U4-E P&F INDUCTIVE SENSOR-DC PEPPERL
NJ4-12GM40-E P&F INDUCTIVE SENSOR-DC PEPPERL
NJ4-12GM40-E3 P&F INDUCTIVE SENSOR-DC PEPPERL
NJ4-12GM50-WS P&F INDUCTIVE SENSOR-AC PEPPERL
NJ5-18GK50-E2 P&F INDUCTIVE SENSOR-DC PEPPERL
NJ5-18GM-N P&F INDUCTIVE SENSOR PEPPERL
OJ3000-M1K-E23 P&F PHOTO SENSOR-RETRO REFL. PEPPERL
OJ500-M1K-E23 P&F PHOTO SENSOR-DIFFUSE MODE PEPPERL
RT1X2 P&F PHOTOELECTRIC ACCESSORY PEPPERL
V1-W-YE2M-PVC P&F ACCESSORY PEPPERL
ZH-Z.ES P&F Z-SYSTEM BARRIER PEPPERL
Z787 P&F Z-SYSTEM BARRIER PEPPERL

216-360-9800

Friday, March 2, 2012

Fenwal Detect-A-Fire switches

Anderson-Bolds stocks and sells Fenwal's fire protection Detect-A-Fires.


DETECT-A-FIRE units by Kidde-Fenwal are the "heart" of many Fire Protection Systems. These highly reliable devices have been a standard of the industry for over 45 years. Many thousands of these units are now in use controlling the release of extinguishants such as clean agents, C02, water, or dry chemicals. In some systems the device is used as an ALARM device, to sense overheat or fire, and alert personnel. In other systems, it is used as a RELEASE device, to sense fire and actuate fire attack systems.

DETECT-A-FIRE units by Fenwal Controls have met with wide acceptance because they are designed with RATE COMPENSATION. This provides a unique advantage over both fixed temperature and rate-of-rise types of detectors because only the DETECT-A-FIRE unit accurately senses the surrounding air temperature regardless of the fire growth rate. At precisely the predetermined danger point, the system is activated. Fixed temperature detectors must be completely heated to alarm temperature and therefore a disastrous lag in time may occur with a fast rate fire. Rate-of-rise devices, on the other hand, are triggered by the rate of increase in ambient temperature and are subject to false alarms caused by harmless, transient thermal gradients such as the rush of warm air from process ovens.


The secret of the unit's sensitivity is in the design (Figure 1). The outer shell is made of a rapidly expanding alloy which closely follows changes in surrounding air temperature. The inner struts are made of a lower expanding alloy. Designed to resist thermal energy absorption and sealed inside the shell, the struts follow temperature changes more slowly. A slow rate fire (Figure 2) will heat the shell and struts together. At the "set point," the unit will trigger, actuating the alarm or releasing the extinguishant. A transient rush of warm air up to 40F/min. may expand the shell, but not enough to trigger the unit. By ignoring transient warm air excursions, the DETECT-A-FIRE unit virtually eliminates false alarms prevalent with rate-of-rise devices. If a fast rate fire (Figure 3) starts, the shell will expand rapidly. The struts will close, actuating the alarm or releasing the agent. The faster the fire rate of growth, the sooner the DETECT-A-FIRE unit will react.



HORIZONTAL DETECT-A-FIRE-UNITS
Horizontal detectors are designed for locations where appearance is a factor. The attractive, functional design lends physical protection of the unit while making it suitable for commercial, industrial, mercantile and public buildings,institutions and ships in non-hazardous locations (those classified as "ordinary" under the National Electric Code). Flush mounted units are designed to fit standard 4" octagonal electrical boxes and surface mounting units are designed to mount directly on ceilings or on 4" electrical junction boxes. Canadian Electrical Codes requires mounting only to an electrical junction box.

Fenwal part numbers include: 27020 27021
Temperature Settings (degrees F): 140 160 190 210 225 275 325
VERTICAL DETECT-A-FIRE-UNITS
Vertical detectors are designed for use in both "ordinary" or "hazardous" locations. For "ordinary" use, they may be mounted to any approved junction box with 7/8" diameter opening by using 1/2-14 NPT mounting nuts. The device may be wired in or out of conduit, depending on local preference and codes. Four lead wires are provided on normally open vertical units (that close on temperature rise), per UL requirement, to facilitate supervision of system wiring. Instruments are Underwriters Laboratory and Underwriters Laboratory of Canada listed and Factory Mutual approved for hazardous locations, when mounted in a suitable fitting.

Fenwal Part Numbers include : 27120 28020 27121 28021
Temperature Settings (degrees F): 140 160 190 210 225 275 325 360 450 500 600 750
For a quote please call 216-360-9800 or email: info@anderson-bolds.com
www.anderson-bolds.com


Thursday, March 1, 2012

ATC Power Alert - UPA's ~ Voltage Indication Device


Anderson-Bolds can provide the new ATC Power Alerts.

You can email us a request for quote with this form.

The UPA-100 Power Alert reduces the risk of electrical arc flash by pre-verifying the electrical isolation from outside of a control panel. Hardwired to the circuit breaker or main disconnect, the UPA flashes whenever voltage is present. Engineered with redundant circuitry, the Power Alert is powered by the same voltage that it indicates. The eight detector UPA-100 visually alerts to the presence of dangerous AC or DC (Stored Energy) potentials occurring between any combination of the four monitored input lines (L1, L2, L3, GND).

The UPA 130 Power Alert reduces the risk of electrical arc flash by pre-verifying the electrical isolation from outside of a control panel. Hardwired to the circuit breaker or main disconnect, the UPA flashes whenever voltage is present. Engineered with redundant circuitry, the Power Alert is powered by the same voltage that it indicates. The eight detector UPA-130 visually alerts to the presence of dangerous AC or DC (Store Energy) potentials occurring between any combination of the four monitored input lines (L1, L2, L3, GND).

The UPA 130S Power Alert reduces the risk of electrical arc flash by pre-verifying the electrical isolation from outside of a control panel. Hardwired to the circuit breaker or main disconnect, the UPA lights at a steady statewhenever voltage is present. Engineered with redundant circuitry, the Power Alert is powered by the same voltage that it indicates. The eight detector UPA-130S visually alerts to the presence of dangerous AC or DC (Store Energy) potentials occurring between any combination of the four monitored input lines (L1, L2, L3, GND).

The UPA 13 0DIV 2is Class 3, Division 2 FM approved for use in hazardous environments. The UPA 130 DIV2 Power Alert reduces the risk of electrical arc flash by pre-verifying the electrical isolation from outside of a control panel. Hardwired to the circuit breaker or main disconnect, the UPA flashes whenever voltage is present. Engineered with redundant circuitry, the Power Alert is powered by the same voltage that it indicates. The eight detector UPA-130 visually alerts to the presence of dangerous AC or DC (Store Energy) potentials occurring between any combination of the four monitored input lines (L1, L2, L3, GND).

With nominal 3-phase line voltage applied, a flashing green NORMAL LED gives positive indication of a good fuse and integrity of the wire connection to each side of the fuse. A flashing red FAULT LED gives positive indication of an unconnected or open fuse, or a BFA wiring fault that needs corrected such as a lost connection to either side of the fuse or mismatched line and load wires. When phase loss occurs, both FAULT and NORMAL LEDS will extinguish. The BFA will continue to indicate the status of the fuse during a phase loss if a regenerated voltage is produced on the open phase from a rotating motor.

The ATC Diversified Electronics GFD Series is intended for the use on ungrounded systems to detect and indicate the phase of the first ground fault condition. This enables corrective action to avoid the potential hazards resulting from a second ground fault. With nominal 3 phase line voltage applied, a flashing NORMAL green LED gives indication of a non-fault condition and integrity of the wire connection to the corresponding phase. A flashing red LED gives positive FAULT indication of either a phase-to-ground fault, or a lost connection to the corresponding phase.


SERIES PART NUMBER DESCRIPTION PRICE
UPA-100 Series UPA-100 Universal Power Alert $111.00
UPA-100 Series UPA-WP100 ANSI Warning Plate $7.00
UPA-130 Series UPA-130 Universal Power Alert $111.00
UPA-130 Series UPA-130S Universal Power Alert-Solid On $135.00
UPA-130 Series UPA-130DIV2 Universal Power Alert- ClassI,Division2 $149.00
UPA-130 Series UPA-130GOV Universal Power Alert-Government version $135.00
UPA-130 Series UPA-BZL UPA-130 Flush Mount Kit $10.00
UPA-100 Series UPA-WP130 ANSI Warning Plate $7.00
BFA Series BFA-100 Fuse Status Indicator $75.00
BFA Series BFA-200 Fuse Status Indicator $75.00
GFD Series GFD-100 Three Phase Ground Fault Display $109.00
GFD Series GFD-200 Three Phase Ground Fault Display $109.00





Prices as of March 1, 2012 and can change at any time.
Call for prices and delivery. 216-360-9800