ATC Diversified Multifunction Meter VCFP96M

Anderson-Bolds sells the Diversified Electronics Electric Meter for Industry

Diversified Electronics Industrial Controls - Go Orange

To get a quote use our ATC/Diversified Parts Form HERE!

Diversified Electronics, Orange Controls for automation.

The VCFP96M is a complete single phase and three phase digital metering system suitable for low, medium and high voltage control panels, gensets, load banks, building management systems and power management systems. The VCFP96M can be used on single phase, three phase three wire as well as three phase four wire balanced or unbalanced systems. The six easy to access front control keys are used for scrolling up or down through the parameters being measured and displayed such as voltage, current, power factor, power (active, reactive, apparent), energy and frequency. Output specifications include pulse output and RS485 Modbus RTU communication protocol compatible with PC, PLC, RTU, data loggers and SCADA programs. The VCFP96M is available in a 96 x 96 mm panel mount housing (front panel IP65) with red led display for easy viewing in a variety of conditions.

BUY THE VCFP96M METER HERE:

VIEW THE DATA SHEET HERE.

ATC Diversified VCFP96M UL Listed Meter

Input Specifications

Electrical Connection

3Ø - 3 wire, 3Ø - 4 wire, 2Ø - 3 wire, 1Ø - 2 wire

Input Voltage Range

11 to 300V AC, (Phase to Neutral) 19 to 519V AC (Phase to Phase)

Input Current Range

Nominal 5A AC (Min-11mA, Max-6A)

Frequency

45 to 65Hz

Display Scrolling 

Automatic / Manual (Programmable) 

Power Consumption

8VA Max

Display Reset 

Programmable (For energy)

Resolution

For energy :0.01k, 0.1k, 1k, 0.01m, 0.1m, 1m (depending upon CT ratio x PT ratio)For Power, Voltage, Current : Auto resolutionFor Power factor : 0.001

Accuracy

Voltage (L-N / L-L) : ±0.5% of F.S. Power Factor ±0.01 Current ±0.5% F.S.Frequency : ±0.1% For L-N Voltage >20VFor L-L Voltage >35VPower (Active, Reactive, Apparent) : 1%Energy (Active, Reactive, Apparent) : Class 1

Memory Retention

10 years (For energy) 

Measuring Parameters

Voltage (L-L / L-N) (Individual / Average), Current (I1, I2, I3) (Individual / Average),Frequency, Power Factor (Individual /Total), Active, Reactive & Apparent power (Individual / Total),Active, Reactive & Apparent Energy (Total), Demand (Min / Max Active Power, Min/Max Reactive Power, Max Apparent Power), %THD up to 31st Level Max Demand Current, Neutral Current, Phase Sequence Detection

Output Specifications

Pulse Output	Voltage Range : External 24V DC maxCurrent Capacity : 100mA maxPulse Width : 100 ms ± 5 ms
CommunicationInterface and Protocol	RS485 and MODBUS RTU
Communication Address	1 to 255
Transmission Mode	Half duplex
Transmission Distance	500 meter maximum
Transmission Speed	300, 600, 1200, 2400, 4800, 9600, 19200 (in bps)
Parity	None, Odd, Even
Stop Bits	1 or 2
Response Time	100 ms (max and independent of baud rate)

FEATURES:
• 3Ø True RMS (Voltage, Current)
• 3Ø Power (Active, Reactive, Apparent), Energy (Active, Reactive, Apparent)
• Programmable CT/PT Primary/Secondary
• CT Polarity Error Detection
• Variable Pulse width Selection
• Single Phase Network with Phase Selection
• Modbus RTU Communication (RS485)
• Neutral Current Measurement
• THD Up to 31st Level.
• Single Pulse Output / Demand Phase Sequence Detection

Compliance:

ESD Immunity	IEC 61000-4-2	Level IV (Air discharge : 15kV),(Contact Discharge : -8kV
Surge Immunity	IEC 61000-4-5	+/- 2kV common mode, (Line to ground)+/- 1kV differential mode, (Line to Line)
Radiated Susceptibility	IEC 61000-4-3	Level III, 80 to 1000MHz (10V/m)Level II, 1.4GHz to 2GHz (3V/m)Level I, 2GHz to 2.7GHz (1V/m)
Conducted Susceptibility	IEC 61000-4-6	Level II (3V/m)
Voltage Dips and Interruptions	IEC 61000-4-11	Dips : 0% residual voltage / 1 cycle (Criteria B), 40% residual voltage / 10 cycles 50Hz / 12 cycles 60Hz (Criteria C)70% residual voltage / 25 cycles50Hz / 30 cycles 60Hz (Criteria C)Interruptions : 0% residual voltage /250 cycles 50Hz / 300 cycles 60Hz(Criteria C)
Conducted Emission	CISPR-11
Radiated Emission	CISPR-11
Electrical Fast Transient	IEC 61000-4-4	Level III (2kV)

Anderson-Bolds
216-360-9800
www.anderson-bolds.com

ATC / Diversified is a manufacturer of Industrial Automation Controls including Timers, Counters, Voltage Monitors, Current Monitors, Voltage Power Alerts, Time Delay Relays, Temperature Controls, Duplexors, Alternating Relays and Motor Protection.

ATC DIN Mount Timers 175MU and 175SO

Anderson-Bolds sells the ATC DIN rail mount timers 175MU and 175SO

The ATC Mutli Function timer 175MU

The Model 175MU DIN Rail Mount Multifunction Industrial Timer from the Automatic Timing and Controls division of Marsh Bellofram offers a universal supply voltage of 20-240 VAC (50/60 Hz) and 12-240 VDC, 13 unique functions, and 10 timing ranges within a single unit. 

The timer features a slim, space saving design. It is available for new applications and can also be used as a drop-in replacement for most DIN rail mount industrial timers operating from a 20-240 VAC supply. The 175MU multifunction industrial timer reduces in-house inventory management requirements, by providing a single part number to competently support a range of industrial timing applications.

The low-cost, compact timer comes standard in a 17.5 mm DIN rail mount housing with a 5 amp SPDT relay output contact configuration and user-selectable time ranges, from 0.1 second up to three hours. In addition, the unit is easily configured via its front knobs for time range, time scale and mode setting. The ATC Model 175MU is both UL listed and CE certified

ATC 175MU

Features:

• 13 Functions
• 10 Timing ranges
• Front panel knobs for time range, time scale, mode setting
• Slim, space saving design
• UL listed, CE certified

Applications:

• OEM equipment
• Packaging and plastics machinery
• Machinery control
• Materials handling
• Conveyor systems control
• Motors and pumps,
• Process related applications

ATC - Automatic Timing and Controls is your timer source with the widest selection and most trusted timers on the market. Partnered with Anderson-Bolds for 50 years.

Anderson-Bolds
216-360-9800

ATC Stock at Anderson-Bolds

Automatic Timing and Control  ( ATC )  stock at Anderson-Bolds.
Call to order 216-360-9800 or use our contact form here.

1812000		ATC REFLECTOR
1812400		ATC REFLECTOR
1812600		ATC REFLECTOR
1815200		ATC REFLECTOR
1815300		ATC REFLECTOR
8256300		ATC SOCKET
8256400		ATC SOCKET
8256900		ATC SOCKET 11 pin spades
8256975		ATC HOLD DOWN (FOR 8256900)
8258100		ATC SOCKET
8258200		ATC SOCKET
8258500		ATC DIN/RAIL SOCKET 8 pin
8258600		ATC 11 PIN SURF/DIN RAIL SCKT
700221001		ATC 3" TARGET REFLECTOR
3042750001		ATC MOTOR, 12 RPM
3052656170		ATC RETROFIT KIT
3142600700		ATC SOCKET KIT
3190250200		ATC RETAINING CLIP
3190250600		ATC RETAINING CLIP
3192614400		ATC MOUNTING BRACKET
3192614500		ATC SOCKET KIT
3252606200		ATC SURFACE MOUNTING BRACKET
3282600100		ATC SOCKET KIT
3282600200		ATC KIT
3390250300		ATC HOLD DOWN FOR 8258500
3393200100		ATC BRACKET
3532602700		ATC SURFACE MTG. BRACKET ASSY.
3655900200		ATC BLUE KNOB
3655900300		ATC BLACK KNOB
3762601500		ATC HOUSING
4053200200		ATC PANEL MOUNTING BRACKET
4054500100		ATC GASKET
4070251300		ATC HOLD DOWN CLIP FOR 8258500
4220250200		ATC HOLD DOWN CLIP FOR 8258500
70632702100		ATC REFLECTION SENSOR (E20055)
70632702200		ATC REFLECTION SENSOR (E20071)
70632710100		ATC FIBER OPTIC CABLE
70632711100		ATC FIBER OPTIC CABLE
ARA120ABA		ATC / Diversified Relay
AT11DN.120		ATC TIMER  (TENOR)
GX7-P42E		ATC TIMER/counter (TENOR)
LE3S		ATC UNIVERSAL DIGITAL TIMER
MC6MS-25   DC24V		ATC PUSHBUTTON RESET COUNTER
S100BS-120-R		ATC STROBE LIGHT
TZ4ST-24S		ATC (TENOR) TEMP.CONTROLLER
22321XX		ATC NEMA 12 MOLDED ENCLOSURE
305E006A10PX		ATC TIMER
305E016A10PX		ATC TIMER
309E022A04PX		ATC TIMER
309E049D04PX		ATC TIMER, 240/50
310E105A10PX		ATC COUNTER
319B006Q1X		ATC TDR 30 SEC. TIMER
319B349Q1X		ATC COUNTER
319E030F1C		ATC TIMER FM Approved
319E100F1C		ATC TIMER FM Approved
322B056A22CS		ATC TIMER
325A346A20PX		ATC TIMER
331B357K10XX		ATC TIMER
331B357Q10XX		ATC COUNTER
335B351A10PX		ATC TIMER
339B200Q2X		ATC TIMER 1 OR 10 SEC/MIN/HR
339B359Q2X		ATC TIMER, .3 OR 3 SEC/MN/HR
342B200F10PX		ATC TIMER 24-240 VAC / 24VDC
350-3-SPVC-5		ATC CABLE
354A350Q10PX		ATC COUNTER
355C347A30PX		ATC TIMER
356C350Q30PX		ATC COUNTER
365A300R30PK		ATC TIMER
365A300T30PX		ATC TIMER, 24 VAC
365C300Q30PX		ATC TIMER
365M300Q30PX		ATC TIMER WITH MEMORY
366C400Q30PX		ATC COUNTER
366C400R30PX		ATC COUNTER 240V 50/60HZ
405AR100S2X		ATC TIMER
405A100E1X		ATC TIMER, 12 VDC
405A100E2X		ATC TIMER
405A100FKK-J01210-00		ATC TIMER, SPEC J01210-00
405A100F2X		ATC 1 OR 10 SEC/MIN/HR TDR
405A500F2X		ATC 5 OR 50 SEC/MIN/HR TDR
405A-J01328-01		ATC TIMER
407B100F3X		**OBSOLETE OCT. 2012 -
409A500F2X		ATC TIMER 5 OR 10 SEC/MIN/HR
417B100F2K		ATC TIMER
422AR100S0X		ATC TIMER
422A100F10X		ATC TIMER OFF/ON REPEAT CYCLE Obsolete
422A100F30X		ATC TIMER ON/OFF REPEAT CYCLE
422A500F10X		ATC TIMER OFF/ON REPEAT CYCLE Obsolete
423A300F10XX		ATC TIMER
425A300Q10XX		ATC TIMER
425A300Q20XD		ATC TIMER
5508JE12240W43041010		TCP THERMOCOUPLE
5508JE336W430440		TCP THERMOCOUPLE
5508JE736W430440		TCP THERMOCOUPLE
5706B611XX		ATC TIMER
5708A		ATC TIMER
600-3-0011		ATC SOCKET 8-PIN SCREW TERM.
600-3-0012		ATC SOCKET
655-8-1001		ATC TIMER
7081AS4X4NLX		ATC BEAM SWITCH
7082AD4X4NLX		ATC BEAM SWITCH
7083AR4D4NLX		ATC BEAM SWITCH
7211A1QX		ATC MASTER LIGHT OPERATER
7232AD2D5FRX		ATC BEAM SWITCH
7233AR0X5FRX		ATC BEAM SWITCH
7242AD2D5FRX		ATC BEAM SWITCH
7243AR0D5FRX		ATC BEAM SWITCH
7253AR0X3ASX		ATC BEAM SWITCH
7261AS4X4FRX		ATC BEAM SWITCH
7262AD4D4FRX		ATC BEAM SWITCH
7263AR4X4FRX		ATC BEAM SWITCH
7605AR04N12NQ		ATC PHOTOELEC SENSOR
7691ASE04DS2X		ATC PHOTO SENSOR
7700-025-01-00		ATC CABLE 2 METER
7703AR04N3BQP		ATC LASER SENSOR
7703BR04N3BPT		ATC THRU BEAM LASER SWITCH
7703BR04N3BQP		ATC LASER SENSOR
7708AR04N3BPT		ATC PHOTOELEC SENSOR
7708BR04N3BQP		ATC LASER PHOTOELECTRIC SENSOR
7864AD4X4FRX		ATC PHOTO SENSOR

216-360-9800
info@anderson-bolds.com

ATC timers, ATC photo electric switches, ATC laser switches, sockets, retrofit kits, Diversified voltage
products, Power alerts, Tenor Products, ATC

Autonics Proximity Sensors

Proximity Switches by Autonics and Anderson-Bolds


Autonics Proximity sensors

Products include :  Inductive cylindrical type | Inductive square type | Capacitive type | Transmission coupler | Junction box | Accessories Autonics PR Series  General type proximity sensor PR Series realizes world-best class superior noise resistance characteristics with dedicated IC; in addition, the series is the wide use proximity sensors having various line-ups in terms of size and sensing distance. *Improve the noise resistance by adopting dedicated IC *Built-in protection circuit of reverse power polarity (DC 3-wire type) *Built-in surge protection circuit *Built-in over current protection circuit (DC type) *Long life cycle, high reliability with simple operation *Available to check the status of operation by Red LED indicator *Protection structure IP67 (IEC standard) *Wide range of applications for replacement of micro switches, limit switches Autonics PRA Series  Spatter-resistance type proximity sensor PRA Series is to prevent malfunction caused by spatter with coating appearance using excellent heat resistance material, and realizes world-best class superior noise resistance characteristics with dedicated IC. Also, a wide variety of applications can be made as replacement of spatter-resistance type in order to increase user convenience. *Improve the noise resistance by adopting dedicated IC *Built-in protection circuit of reverse power polarity (DC 3-wire type) *Built-in surge protection circuit *Built-in over current protection circuit (DC type) *Available to check the status of operation by Red LED indicator *Protection structure IP67 (IEC standard) *Replacement of spatter-resistance type limit switches Autonics PRD Series Long distance sensing proximity sensor PRD Series guarantees 1.5~2 times longer sensing distance compared to existing models, and realizes world-best class superior noise resistance characteristics with dedicated IC. Also, this high reliability sensor can prevent the cable connecting part from disconnecting caused by folding or banding with strengthening the sensor/cable connecting part. Autonics PRDAT/PRDAWT Series Long distance sensing spatter-resistance type proximity sensor PRDAT/PRDAWT Series is to prevent malfunction caused by spatter with coating appearance using excellent heat resistance material, and realizes world-best class superior noise resistance characteristics with dedicated IC. The series guarantees 1.5~2 times longer sensing distance compared to existing models; in addition, a wide variety of applications can be made as replacement of spatter-resistance type in order to increase user convenience. Autonics PRDT/PRDWT Series Long distance cylindrical DC 2-wire type inductive proximity sensors PRDT/PRDWT Series guarantees 1.5~2 times longer sensing distance compared to existing models, and realizes world-best class superior noise resistance characteristics with dedicated IC. Also, this high reliability sensor can prevent the cable connecting part from disconnecting caused by folding or banding with strengthening the sensor/cable connecting part. Autonics PRDCM Series Long distance sensing connector type proximity sensor PRDCM Series makes maintenance and wiring works easier than ever. The series guarantees 1.5~2 times longer sensing distance compared to existing models. Also, it realizes world-best class superior noise resistance characteristics with dedicated IC. Autonics PRW Series 2 meter Cable connector type proximity sensor PRW Series realizes world-best class superior noise resistance characteristics with dedicated IC. Also, the series is to reduce maintenance works by replacing body for user convenience. Autonics AS Series Long sensing distance type proximity sensor AS Series is able to detect 50mm long distance, and realizes world-best class superior noise resistance characteristics with dedicated IC. Also, the series adopts both Normal Open + Normal Close output at the same time to increase user convenience. Autonics PRCM Series Connector proximity sensor PRCM Series makes maintenance and wiring works easier than ever. Also, it realizes world-best class superior noise resistance characteristics with dedicated IC. *Shorten the time of maintenance  *Improve the noise resistance by adopting dedicated IC *Built-in protection circuit of reverse power polarity (DC 3-wire type) *Built-in surge protection circuit *Built-in over current protection circuit (DC type) *Available to check the status of operation by Red LED indicator *Protection structure IP67 (IEC standard) *Wide range of applications for replacement of micro switches, limit switches Autonics PS/PSN Series Rectangular limit switch style type proximity sensor PS/PSN Series realizes world-best class superior noise resistance characteristics with dedicated IC. User selectable sizes. model. Autonics PFI Series Flat type proximity PFI Series realizes world-best class superior noise resistance characteristics with dedicated IC. This model is able to be installed in a narrow space for efficient work environment by 10mm height. *Easy to mount in narrow space by Flat structure(Height:10mm) *Improve the noise resistance by adopting dedicated IC(DC) *Built-in protection circuit of reverse power polarity, surge protection,over current protection circuit *Drive the load of 200mA directly within range of 12-24VDC power supply *Available to check the status of operation by Red LED indicator *Waterproof structure by IP67(IEC standard) *Wide range of applications for replacement of micro switch, limit switch Autonics CR Series Electric capacitive type proximity sensor CR Series is able to detect a wide variety of materials including iron, metal, plastic, water, stone and wood having permittivity. Moreover, built-in sensitivity volume allows the series can be applied in various fields to increase user convenience. *Able to detect iron, metal, plastic, water, stone, wood etc *Long life cycle and High reliability *Built-in protection circuit of reverse power polarity, surge *Easy to adjust of the sensing distance with built-in sensitivity adjustment volume *Available to check the status of operation by Red LED indicator *Easy to control of level and position Autonics PET18-5 Transmission coupler PET18-5 is loop powered type models transmitting the signal by magnetic coupling of coils so that no external power supply is necessary. This model is superior with environmental resistance because it does not cause any malfunction even if its transmitting part is disclosed to contaminants. Also, it can be used in a wide variety of applications including drilling, machine table and various revolution axis. *Loop powered type  The signal is transmitted by magnetic coupling of coils. *Superior with environmental resistance  It does not cause any malfunction even the device is smeared with oil etc. *Applications  A drilling, machine table, robot arm, conveyor belt and various revolution axis. Autonics PT Series Junction box PT Series is able to drive multiple sensors by single power. This model provides more efficient work environment by simplifying complicate wiring works. Also, it satisfies waterproof structure IP67 when using waterproof cover. *Able to check the status of operation by Red indicator *Able to drive multiple sensors by single power *Realization of convenience for wiring or power line *Waterproof structure IP67 when using waterproof cover  (Waterproof structure IP66 for protection cover) Autonics Connector cable (Socket-Plug / Plug-Plug type) Photo/proximity sensor type connector connection wire C□□4 Series line-up with various length max 5m. The series provide various selections for users depending on each work environment. Also, it is easy to maintain wires by socket-plug and plug-plug type. Autonics Connector cable (Socket / Plug type) Photo/proximity sensor type connector wire CID/CLD Series line-up with various length max 5m. The series provide various selections for users depending on each work environment. Moreover, it realizes high reliability in the oily environment by oil resistance reinforced type with IEC standard. Socket and plug type cable allows easier wiring works ever.

ATC TIMER UPDATE

Anderson-Bolds stocks ATC - Automatic Timing and Controls - Timers and TDR's.

Some new and new and improved timers from ATC, ie. AUTOMATIC TIMING AND CONTROL

ATC CP Series Percentage Timer

• Precise Fool-proof Operating Mechanism
• Eliminates All Engaging Cams And Latches
• Five Time Ranges From Which To Choose
• Minimal Panel Space Needed

CP30SA 30 Seconds
CP60SA 60 Seconds
CP15MA 15 Minutes
CP30MA 30  Minutes
CP60MA 60 Minutes

For continuous ON-OFF control of electrical circuits, the ATC timer Model CP single circuit repeat cycle timer is a continuous cycling control where the ON or circuit closure time is dial adjusted for a percentage of the total time cycle.

Applications: Control of pumps, blowers, filters, heating equipment, industrial ovens, laboratory equipment and wherever ON or OFF control is desired as a percentage of the primary fixed total time cycle.

304G Solid State Percentage ATC Timer

• High Accuracy
• Convenient Adjustment
• Cycle Progress Indication

The ATC 304G solid-state percentage timer comes standard in a 120 sec range with 15 sec, 30 sec, 60 sec user configurable ranges. Additionally, all second ranges can become minute ranges by cutting jumper J0. The 304G is easily panel mounted with 4 screws. It utilizes an integrated circuit technology for high accuracy timing. 304G400Q00XX has the user selectable jumpers for the multi ranges.

CONTACTS: The relay contact is capable of switching 10 A to a resistive 120 VAC or 30 VDC load. It is capable of driving a 1/3 HP load at 120 VAC.

CYCLE PROGRESS INDICATION: The 304G has a pilot light that is on solid during the relay off time. It blinks at a faster rate during the relay on time: once every 3.5 seconds during the first 10% of the cycle, twice during the second 10% and so on.

HIGH ACCURACY: The 304G’s timing circuit is not a simple RC circuit. It utilizes the sophistication of a proprietary integrated circuit that includes counting technology along with a stable oscillator to provide repeatable time delays.

CONVENIENT ADJUSTMENT: Graduated in easily read 1% increments, the 304G provides continuous adjustment of on time between 5 and 95%.

ATC 304GX Solid State Percentage Timer with Memory

• Cycle Progress Memory
• Latching Relay
• High Accuracy
• Convenient Adjustment

The ATC 304GX operates like the 304G, only with cycle progress memory and a latching relay. The 304GX saves progress when power is removed, and will resume timing when power is reapplied. The relay only changes state when the cycle reaches the set point or the end of the cycle.  The 304GX also has the multi range capability of the 304G via jumpers.  Order the 400 version: 304GX400Q00XX.

CONTACTS: The relay contact is capable of switching 10 A to a resistive 120 VAC or 30 VDC load. It is capable of driving a 1/3 HP load at 120 VAC.

CYCLE PROGRESS INDICATION: The 304GX has a pilot light that is on solid during the relay off time. It blinks at a faster rate during the relay on time: once every 3.2 seconds during the first 10% of the cycle, twice during the second 25% and so on.

HIGH ACCURACY: The 304GX’s timing circuit is not a simple RC circuit. It utilizes the microprocessor that includes counting technology along with a stable crystal oscillator to provide repeatable time delays.

CONVENIENT ADJUSTMENT: Graduated in easily read 1% increments, the 304GX provides continuous adjustment of on time between 5 and 95%.

400 Series Interval ATC Timer

The pointer is manually set to the desired time. At the instant the knob is turned from zero, the switch MS closes and load A is energized. After the set time has elapsed, the load is de-energized and the timer stops at zero.

There is a terminal connection, (terminal 4) load B, for an end of cycle light and/or audible signal. A toggle switch can be furnished as added equipment which allows setting of the time before actuating the load. This provides a means of more accurate time settings. This toggle switch (time start and signal stop) will also turn off the end of cycle signal.

APPLICATIONS: Designed to control an electrical circuit for a set time upon operation of the manual setting knob which is directly connected to the switch operating cam. To assure positive setting action, this timer does

not set through a clutch. Calibrated dial settings are available in ranges from 1 minute to 24 hours. Designed for control of any electrically operated equip-

ment or operation, such as processing machinery, plastic molding, laundry and dry cleaning machinery, electric ovens and furnaces, photographic equipment, or

wherever accurately timed control of electrical operation is critical.

Timer available in 120 volts AC only.

Part numbers are 406A (30 minutes), 407A (60 minutes), 409A (5 hours).

405AR Series Flip Flop ATC Timer

• On Delay / Interval
• 12 Timing Ranges
• Universal Supply Voltage
• Compact Size
• IP 40 rated front
• LED power on, relay on

On Delay / Interval Timing Modes: The ATC 405AR has two modes of operation, On Delay or Interval timing modes. The unit has a set DPDT output contacts rated for 10 amps resistive. When in ON-Delay Mode, the contacts transfer at time out. When in the interval Mode, the contacts transfer when power is applied and released at time out.

Universal Power: All ATC 405 AR timers can be powered using 20 to 240V AC or 12 to 240V DC power, reducing inventory management of replacement units.

1/16 DIN Housing: The 48mm (1/16 DIN) housing is compact and rated for P40 on the face plate. The 405AR is mounted in a 8-pin round socket.

The dial on the 405AR is extra large and easy to read. When fractional ranges are selected, decimal points are clearly marked.

The Mode select and Range select switches are located on the front of the unit, so that when panel mounted allows quick change of mode or range of the unit.

Only 2 model numbers, one with the octal pins and one with terminals.  Part numbers are 405AR100S2X (8-PIN socket) and 405AR100S5TX (Terminals)  Note: The terminal version has a 5 amp relay while the 8-PIN socket version has a 10 amp relay.

422AR Series ATC Timer

The ATC 422AR Flip-Flop timer are available with Repeat Cycle operations. During Repeat Cycle operation the 422AR cycle ON and OFF repeatedly, allowing periodic cycling of a load. Two knobs are available to individually adjust the ON-time and the OFF-time. The 422AR can be configured with either the relay being energized during the first timing period or de-energized during the first timing period.

The ATC 422AR have 6 selectable timing ranges available for both ON-time and OFF-time periods. The ranges are 1 and 10 SEC/MIN/HRS dip switch selectable. Having this flexibility allows for a load to be energized for a brief time over a cycle that lasts up to 10 hours. This is deal for lubrication or other maintenance functins that must occur each shift or day during a plant operation.

The ATC 422AR 1/16 DIN housing is compact, and designed for panel mounting. The timer is mounted in an 8-pin round socket. The front of the 422 AR features 2 knobs. One knob is used to set the ON-time and the other knob is used to set the OFF-time for the timer’s cycle. The ATC 422AR is universal powered by 20 to 240 VAC or 12 to 240 VDC
operation voltage.

The output of the ATC 422AR has a DPDT mechanical relay which is rated for 10 amps @ 250 VAC resistive. The 422AR can be ordered in a terminal option which is only available with 5 amp Relay output. The 422′s have individual LED indicators for ON time and OFF time. These LED’s provide a unique and effective method of cycle progress indication.

Only 2 model numbers, one with the octal pins and one with terminals.  Part numbers are ATC 422AR100S0X (8-PIN socket)

and ATC 422AR100S5TX (Terminals)  Note: The terminal version has a 5 amp relay while the 8-PIN socket version has a 10 amp relay.

MTA-91H Series ATC Timer

• 10 Timing Modes
• Time Ranges from 1 sec to 10 days
• 16A Rated Output Contacts
• Inexpensive

A powerful timer in a small package, the new ATC model MTA-91H Multi-function Time Delay Relay delivers unsurpassed performance in a plug-in package. Select from 10 configurable timing modes and a timing range from 0.1 sec to 10 days to meet your specific needs. Universally powered from 12-240 VAC/VDC, the ATC MTA-91H allows users to stock one timer for many timing applications.

PLEASE USE OUR TIMER DESIGN FORM FOR ANDERSON-BOLDS TO HELP PICK AN ATC TIMER FOR YOU.

216-360-9800 

Timers, Counters and photoelectric devices from ATC ; Automatic Timing and Controls, a division of Marsh Bellofram.

ATC Timers are the industry standard for discreet timing devices.

www.anderson-bolds.com