Budzar Mold Temperature Controller

Anderson-Bolds Sells Budzar's Mold Temperature Controller.
The Best Mold Temperature Controller on the Market.  Made in the USA in Cleveland.

To Request a quote please fill out our Budzar Parts Form or go to our Contact Us page.

Unmatched reliability and power come to the production process through full feature temperature control in the smallest, best performing, best priced cabinet on the market, in its performance range. Optimize your injection molding and operation productivity with these Budzar Industries Mold Temperature Controllers, featuring total temperature control.

Features of the Mold Temperature Controller include:

• A non-proprietary “self-tuning” controller, continuously adjusts to the process to increase production rates, improve process consistency, reduce scrap and speed startup. Exclusive use of quality equipment: I.E.C. electrical components, non-overloading ODP motor, industrial duty pump with a 300°F rated EPDM HT Carbon/GI Silicar Seal and long life cooling valve work together to provide many years of outstanding service
• Flow rates are available from 20 to 110 GPM @ 30 PSI for turbulent flow. All units may be upgraded to 50 PSI
• Two quick release side panels and a heavy duty easy release clamp fitting for complete maintenance access
• Separate process and set point temperature display, return and supply pressure gauges and full lighted status display provide complete diagnostics
• 11” wide, 10” high and 24” long
• Five year controller warranty with continuous auto tune
• Temperature accuracy +/-1°
• Stainless steel brazed plate exchanged for closed loop cooling
• Each Mold Temperature Controller is factory tested prior to shipment

Models:

DIRECT INJECTION-SOLENOID COOLING VALVE

CLOSED LOOP-SOLENOID COOLING VALVE 

MTC-9-.75-.25-DS-460  9kw, .75hp, 460vac, 15 gpm, 30psi
MTC-9-1-.25-DS-460  9kw, 1hp, 460vac, 22 gpm, 30psi
MTC-9-1.5-.25-DS-460  9kw, 1.5hp, 460vac, 35 gpm, 30psi
MTC-9-2-.5-DS-460  9kw, 2hp, 460vac, 50 gpm, 30psi
MTC-9-3-.5-DS-460  9kw, 3hp, 460vac, 90 gpm, 30psi

DIRECT INJECTION MODULATING COOLING VALVE

CLOSED LOOP—MODULATING COOLING VALVE 

MTC-9-.75-.5-DW-460  9kw, .75hp, 460vac, 15 gpm, 30psi
MTC-9-1-.5-DW-460  9kw, 1hp, 460vac, 22 gpm, 30psi
MTC-9-1.5-.5-DW-460  9kw, 1.5hp, 460vac, 35 gpm, 30psi
MTC-9-2-.5-DW-460  9kw, 2hp, 460vac, 50 gpm, 30psi
MTC-9-3-.5-DW-460  9kw, 3hp, 460vac, 90 gpm, 30psi

12 and 18 kw units available; 230/3/60 electrics available 

MINI PORTABLE HOT WATER UNITS
Budzar's MTC (Mini Temperature Controller) Portable Hot Water System delivers full feature temperature control in the smallest cabinet on the market. The MTC, at 11" wide, 19" high and 24" long, is perfect for any industry process: rubber, plastics, pharmaceutical, chemical, power, steel, petroleum or food requiring a reliable temperature control unit with a small footprint.
The MTC brings unmatched reliability and power to your production process. The MTC eliminates pump failures by using industrial duty pumps with an EPDM Carbon/GI Silicar Seal rated up to 300o F. The standard 30 PSI discharge pressure delivers a powerful, turbulent flow. All units may be upgraded to 50 PSI. A continuous automatic air vent prevents heater burn-out and insures optimum heat transfer through your process. The MTC is built to deliver maintenance-free operation.
The brains of the MTC is a non-proprietary, full function PID controller that comes with a full 5 year warranty. "Continuous Self-Tuning" allows you to set the controller once and then forget it. The controller continuously adjusts the operation of the
MTC to optimize the productivity of your process. A bright dual display shows separate set point and process temperatures that are easy to read under any factory lighting. 

To Request a quote please fill out our Budzar Parts Form or go to our Contact Us page.

Anderson-Bolds
216-360-9800