SRH Steam Ring Heaters from Penberthy- Emerson

Penberthy Emerson Eductors: Steam Ring Heaters from Anderson-Bolds

Penberthy is recognized as a global leader in high-quality level instrumentation in level and flow indication products for pumping, mixing, or heating liquids and gases.

Emerson Penberthy SRH (Steam Ring Heaters) are compact, inline units with low pressure drop. Penberthy SRH units inject steam through a ring-shaped opening within an enlargement in the pipeline.
Liquid passes through and around the ring. Heat is introduced by the direct condensation of steam. They provide fast temperature correction noiselessly and without vibration if applied correctly. Because the liquid flow area is unrestricted, pressure drops across the heater are minimized. This will reduce the horsepower requirements for the operating liquid pump. 

Penberthy Model SRH jet pumps are available in inlet and outlet sizes of 1-1⁄2”, 2” and 3” threaded and 6” flanged 

Emerson/Penberthy SRH Eductor

New Part numbers for Penberthy Steam Ring Heaters

Penberthy SRH 310 in Bronze 1-1/2 Inch Inlet and Outlet

SRH31BZCNTNTNT-01

Penberthy SRH 310 in Bronze 1-1/2 Inch Inlet and Outlet

SRH31CSCNTNTNT-01

Penberthy SRH 310 in Stainless Steel 1-1/2 Inch Inlet and Outlet

SRH31SSCNTNTNT-01

Penberthy SRH 320 in Bronze 2 Inch Inlet and Outlet

SRH32BZCNTNTNT-01

Penberthy SRH 320 in Carbon Steel 2 Inch Inlet and Outlet

SRH32CSCNTNTNT-01

Penberthy SRH 320 in Stainless Steel 2 Inch Inlet and Outlet

SRH32SSCNTNTNT-01

Penberthy SRH 330 in Bronze 3 Inch Inlet and Outlet
SRH33BZCNTNTNT-01

Penberthy SRH 330 in Carbon Steel 3 Inch Inlet and Outlet

SRH33CSCNTNTNT-01

Penberthy SRH 330 in Stainless Steel 3 Inch Inlet and Outlet

SRH33SSCNTNTNT-01

Penberthy SRH 330F in Bronze 3 Inch Inlet and Outlet
SRH33BZCFFFFNT-01

Penberthy SRH 330F in Carbon Steel 3 Inch Inlet and Outlet

SRH33CSCFFFFNT-01

Penberthy SRH 330F in Stainless Steel 3 Inch Inlet and Outlet

SRH33SSCFFFFNT-01

Penberthy SRH 340 in Bronze 6 Inch Inlet and Outlet
SRH34BZCNTNTNT-01

Penberthy SRH 340 in Carbon Steel 6 Inch Inlet and Outlet
SRH34CSCNTNTNT-01

Penberthy SRH 340 in Stainless Steel 6 Inch Inlet and Outlet
SRH34SSCNTNTNT-01

Features of Penberthy Jet Pump eductors

• Simple design with no moving parts to wear out. • No packing glands.
• No lubrication required.
• Virtually maintenance-free.
• Easy to install without special structures or foundations.
• Cast or fabricated constructions. • Variety of materials to suit specific
characteristics of the process liquids.
• Critical flow paths machined smoothly with
no abrupt turns or steps, producing the most efficient flow during the motive function. 

Anderson-Bolds

216-360-9800

www.anderson-bolds.com

Emerson Penberthy Steam Ring Heater Eductor Jet Pumps ~ SRH  -   Emerson Penberthy Steam Ring Heater Eductor Jet Pumps ~ SRH

Emerson LH High Head Liquid Motive Jet Pumps (Eductors)

HIGH Head (LH Series) Emerson Jet Pumps from Anderson-Bolds

Buy Penberthy Emerson LH Series Jet Pumps HERE!

The "L" series jets use a liquid motive (usually water) to create the suction through the jet.

Note: Eductors or Jet Pumps need to be sized properly to work properly.  Just the NPT size is not enough for sizing the application.  If the PSI pressure is too low to overcome head pressure the jet will choke, if the GPM flow rate is not sufficient enough to over come the head pressure or suction requirement the jet will choke.

Features of Emerson Penberthy Jet Pumps (Eductors)
• Simple design with no moving parts to wear out. • No lubrication required.
• Virtually maintenance-free.
• Easy to install without special structures or foundations.
• Self-priming.
• Cast, fabricated or non-metallic constructions.
• Variety of materials to suit specific characteristics of the process liquids.
• Critical flow paths machined smoothly with
  no abrupt turns or steps, producing the most efficient flow during the motive function.

General Application FOR PENBERTHY JET PUMP EDUCTORS

Suitable for a broad range of applications including: handling condensate, pumping wells, circulating solutions, emptying cesspools, pumping brine solutions, extracting solvents, draining cellars, pumping out barges, acidifying, causticizing oils, producing emulsions,elevation water.

Technical Data
Materials: Bronze, iron, carbon steel, 316 SS, PVC, CPVC, PP, PVDF, MONEL, HASTELLOY C
Sizes: 1⁄2” to 12”
Pressure range: 15 to 200 psig (1 to 13.8 barg)
Temperature(max): 200°F(93°C) 

LH SERIES JET PUMPS  FROM Emerson Penberthy

Size (Inches)	Emerson Penberthy PVC LH (High Head)  Eductors / Jet Pumps
1/2A	LH-4APV
1/2B	LH-4BPV
1/2	LH-04PV
3/4	LH-06PV
1	LH-08PV
1 1/4	LH-10PV
1 1/2	LH-12PV
2	LH-16PV
2 1/2	LH-20PV
3	LH-24PV
4	LH-32PV

Size (Inches)	Emerson Penberthy HASTELLOY "C" LH (High Head) Series Eductors / Jet Pumps
1/2A	LH-4AHC
1/2B	LH-4BHC
1/2	LH-04HC
3/4	LH-06HC
1	LH-08HC
1 1/4	LH-10HC
1 1/2	LH-12HC
2	LH-16HC
2 1/2	LH-20HC
3	LH-24HC
4	LH-32HC

Size (Inches)	Emerson Penberthy Bronze LH (High Head) Eductors / Jet Pumps
1/2A	LH-4ABZ
1/2B	LH-4BBZ
1/2	LH-04BZ
3/4	LH-06BZ
1	LH-08BZ
1 1/4	LH-10BZ
1 1/2	LH-12BZ
2	LH-16BZ
2 1/2	LH-20BZ
3	LH-24BZ
4	LH-32BZ
Size (Inches)	Emerson Penberthy Cast Iron LH (High Head) Eductors / Jet Pumps
1/2A	LH-4AIR
1/2B	LH-4BIR
1/2	LH-04IR
3/4	LH-06IR
1	LH-08IR
1 1/4	LH-10IR
1 1/2	LH-12IR
2	LH-16IR
2 1/2	LH-20IR
3	LH-24IR
4	LH-32IR
Size (Inches)	Emerson Penberthy Carbon Steel LH (High Head)  Eductors / Jet Pumps
1/2A	LH-4ACS
1/2B	LH-4BCS
1/2	LH-04CS
3/4	LH-06CS
1	LH-08CS
1 1/4	LH-10CS
1 1/2	LH-12CS
2	LH-16CS
2 1/2	LH-20CS
3	LH-24CS
4	LH-32CS

Size (Inches)	Emerson Penberthy Stainless Steel LH (High Head)  Eductors / Jet Pumps
1/2A	LH-4ASS
1/2B	LH-4BSS
1/2	LH-04SS
3/4	LH-06SS
1	LH-08SS
1 1/4	LH-10SS
1 1/2	LH-12SS
2	LH-16SS
2 1/2	LH-20SS
3	LH-24SS
4	LH-32SS

Size (Inches)	Emerson Penberthy Monel LH (High Head)  Eductors / Jet Pumps
1/2A	LH-4AMO
1/2B	LH-4BMO
1/2	LH-04MO
3/4	LH-06MO
1	LH-08MO
1 1/4	LH-10MO
1 1/2	LH-12MO
2	LH-16MO
2 1/2	LH-20MO
3	LH-24MO
4	LH-32MO

Jet Pumps for Pumping Liquids up to 70+  psi discharge head pressure

Operation for Penberthy Emerson Liquid Jet Pumps
All Emerson jet pumps operate on the principle of a fluid entraining a second fluid. Although design and construction may vary, this applies to all jet pumps.
All Emerson jet pumps have three common features: inlet, suction and discharge. They function as follows:
Inlet - The operating medium (liquid or steam) under pressure enters the inlet and travels through the nozzle into the suction chamber. The nozzle converts the pressure of the operating medium into a high velocity stream, which passes from the discharge side of the inlet nozzle.
Suction - Pumping action begins when vapor, gases or liquid in the suction chamber are entrained by the high velocity stream emerging from the inlet nozzle, lowering the pressure in the suction chamber. The resulting action causes the liquid, gas or vapor in the suction chamber to flow toward the discharge.
Discharge - The entrained material from the suction system mixes with the operating medium and acquires part of its energy in the parallel section. In the diffuser section, part of the velocity of the mixture is converted to a pressure greater than the suction pressure, but lower than the operating medium pressure. 

Buy Penberthy Emerson LH Series Eductors HERE!

ALL Penberthy Emerson Jets can be found HERE!

Anderson-Bolds
216-360-9800
www.anderson-bolds.com

LH High Head Series Liquid Motive Emerson Penberthy Jet Pumps (Eductors)

Penberthy Jets/Eductor styles

Anderson-Bolds sells Penberthy Eductors / JET PUMPS

Cross Reference between Penberthy and Jacoby Eductors.

Providing a practical alternative to more complicated and expensive methods, Penberthy jet pumps offer simple, more cost-effective ways to pump, mix or heat a wide range of liquids and gases used in the process industry. Jet pumps can operate with a wide variety of motive liquids and gases. If you recognize any of the following, you can probably use a Penberthy jet pump.

• Injectors • Exhausters • Ejectors • Siphons

• Eductors • Boosters • Kinematic Pumps

Penberthy jet pumps have a myriad of uses. Jet pumps not only pump liquids, they can also heat, mix, and blend either in-line or in a tank. Jet pumps can evacuate gases, create a vacuum, boost suction pressures, mix granular solids with liquids and move granular solids with compressed air. In fact, you will be surprised at what a jet pump can do to solve your problem.

Penberthy Model LL	Jacoby Model SL
Penberthy Model LM	Jacoby Model ML
Penberthy Model LH	Jacoby Model HL
Penberthy Model GL	Jacoby Model SG
Penberthy Model GH	Jacoby Model HG
Penberthy Model HLM	Jacoby Model MLH
Penberthy Model ELL	Jacoby Model MLE
Penberthy Model RJ	Jacoby Model MLE
Penberthy Model CTE	Jacoby Model TLA
Penberthy Model TME	Jacoby Model TLM

Liquid Motive Eductors are the LL, LM and LH models.

Water is the usual liquid motive.

LL series - 15-200 psig (100-1380 kPag) - Head pressure to to 50 ft. (15.2 m)–H2O

LH series - 15-200 psig (100-1380 kPag) - Head pressure 40 to 80 ft. (12.2-24.4 m)–H2O

LH series - 15-200 psig (100-1380 kPag) - Head pressure 80 ft. (24.4 m) or more–H2O

Gas or Steam motive Eductors are the GL and GH models.

Another method of pumping liquids is to use steam as the motive. This type of jet pump works best

in applications where a minimal amount of infusion of the motive media with the liquid to be transported is required. Quiet operating steam motive jet pumps, like liquid motive pumps, are simply designed with no packing glands and no moving parts to wear out.

GL model eductor 

Motive steam pressure to elevate liquid 50 ft. (15.2 m)

150 psig (1035 kPag)

Motive steam pressure range :  60-150 psig

Suction lift–water temp. to 120° F (49° C) : up to 20 ft. (6.1m)

Minimum NPSH : 13 ft. (4 m)

GL model eductor 

Motive steam pressure to elevate liquid 50 ft. (15.2 m)

75 psig (520 kPag)

Motive steam pressure range :  35-150 psig

Suction lift–water temp. to 120° F (49° C) : up to 20 ft. (6.1m)

Minimum NPSH : 13 ft. (4 m)

Penberthy Models LM, ELL and FL are perfect for many gas pumping operations where more costly and complicated pumps have been used. Imagine being able to use a jet pump to: create a vacuum, evacuate gases from tanks and vessels, scrub a gas to remove contaminants, remove fumes, for gas condensation, drying, distillation, deaeration and more.

Model ELL 

Motive medium pressure range : 20-200 psig

suction range  1-27 inches Hg

Penberthy circulating tank eductors, also known as in-tank mixers, may provide a low cost alternative over other mechanical methods. These units promote more thorough mixing action than either mechanical mixing or air sparging. The flow pattern is easily controlled and provides more complete integration of substances in a wide variety of viscosities and liquids. Penberthy in-tank mixers are inherently non- clogging, and with no moving parts require little or no maintenance. Slurries containing abrasive solids can wear out mechanical mixer blades, involving constant maintenance and process down time.

CTE - Circulating Tank Eductor

Pressure differential of inlet to tank pressure - 10-100 psig (70-690 kPag)

Mixing ratio : 3:1

Max. operating liquid viscosity: up to 2,000 cPs

216-360-9800

info@anderson-bolds.com

Click here for our CONTACT page.